Package: src:linux
Version: 4.19.118-2+deb10u1
Severity: normal


-- Package-specific info:
** Version:
Linux version 4.19.0-9-amd64 (debian-kernel@lists.debian.org) (gcc version 
8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.118-2+deb10u1 (2020-06-07)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-9-amd64 
root=UUID=0fd77287-e4d7-4b55-8510-7f05a983267e ro quiet ipv6.disable=1

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
[    3.936969] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.975895] iTCO_vendor_support: vendor-support=0
[    3.977469] EFI Variables Facility v0.08 2004-May-17
[    3.977545] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.977651] iTCO_wdt: Found a Intel PCH TCO device (Version=4, 
TCOBASE=0x0400)
[    3.979240] usb 1-8.6: New USB device found, idVendor=0b95, idProduct=6801, 
bcdDevice= 0.02
[    3.979241] usb 1-8.6: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
[    3.979242] usb 1-8.6: Product: AX68002
[    3.979242] usb 1-8.6: Manufacturer: ASIX Electronics
[    3.979243] usb 1-8.6: SerialNumber: 00000002
[    3.984037] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.985350] input: ASIX Electronics AX68002 as 
/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.6/1-8.6:1.0/0003:0B95:6801.0007/input/input7
[    4.013873] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    4.014790] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    4.014809] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    4.014823] sr 4:0:0:0: Attached scsi generic sg2 type 5
[    4.014837] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    4.018291] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    4.018414] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    4.018458] snd_hda_intel 0000:01:00.1: Disabling MSI
[    4.018461] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    4.018732] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms 
ovfl timer
[    4.018732] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    4.018733] RAPL PMU: hw unit of domain package 2^-14 Joules
[    4.018733] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    4.018733] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    4.018733] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    4.044941] hid-generic 0003:0B95:6801.0007: input,hidraw3: USB HID v1.10 
Keyboard [ASIX Electronics AX68002] on usb-0000:00:14.0-8.6/input0
[    4.050059] input: ASIX Electronics AX68002 as 
/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.6/1-8.6:1.1/0003:0B95:6801.0008/input/input9
[    4.050106] input: ASIX Electronics AX68002 System Control as 
/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.6/1-8.6:1.1/0003:0B95:6801.0008/input/input10
[    4.065829] pstore: Using compression: deflate
[    4.065839] pstore: Registered efi as persistent store backend
[    4.066710] asus_wmi: ASUS WMI generic driver loaded
[    4.067241] asus_wmi: Initialization: 0x0
[    4.067256] asus_wmi: BIOS WMI version: 0.9
[    4.067299] asus_wmi: SFUN value: 0x0
[    4.067479] input: Eee PC WMI hotkeys as 
/devices/platform/eeepc-wmi/input/input12
[    4.078487] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: 
line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    4.078488] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 
(0x0/0x0/0x0/0x0/0x0)
[    4.078489] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 
(0x1b/0x0/0x0/0x0/0x0)
[    4.078489] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.078490] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    4.078490] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.078491] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    4.078492] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    4.078492] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    4.107645] input: HDA Intel PCH Front Mic as 
/devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    4.108662] input: ASIX Electronics AX68002 Consumer Control as 
/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.6/1-8.6:1.1/0003:0B95:6801.0008/input/input11
[    4.108740] asus_wmi: Number of fans: 1
[    4.115139] input: HDA Intel PCH Rear Mic as 
/devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    4.115163] hid-generic 0003:0B95:6801.0008: input,hidraw4: USB HID v1.10 
Mouse [ASIX Electronics AX68002] on usb-0000:00:14.0-8.6/input1
[    4.115205] input: HDA Intel PCH Line as 
/devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    4.116117] input: HDA Intel PCH Line Out as 
/devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    4.116177] input: HDA Intel PCH Front Headphone as 
/devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    4.176162] systemd-journald[318]: Received request to flush runtime journal 
from PID 1
[    4.254877] logitech-djreceiver 0003:046D:C52B.0006: hiddev1,hidraw5: USB 
HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-8.2/input2
[    4.255132] intel_rapl: Found RAPL domain package
[    4.255132] intel_rapl: Found RAPL domain core
[    4.255133] intel_rapl: Found RAPL domain dram
[    4.368894] usbcore: registered new interface driver snd-usb-audio
[    4.377497] input: Logitech Unifying Device. Wireless PID:406d Mouse as 
/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.2/1-8.2:1.2/0003:046D:C52B.0006/0003:046D:406D.0009/input/input18
[    4.377604] hid-generic 0003:046D:406D.0009: input,hidraw6: USB HID v1.11 
Mouse [Logitech Unifying Device. Wireless PID:406d] on usb-0000:00:14.0-8.2:1
[    4.455337] input: Logitech M705 as 
/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.2/1-8.2:1.2/0003:046D:C52B.0006/0003:046D:406D.0009/input/input22
[    4.455843] logitech-hidpp-device 0003:046D:406D.0009: input,hidraw6: USB 
HID v1.11 Mouse [Logitech M705] on usb-0000:00:14.0-8.2:1
[    5.959311] input: HDA NVidia HDMI/DP,pcm=3 as 
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
[    5.959468] input: HDA NVidia HDMI/DP,pcm=7 as 
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
[    5.959614] input: HDA NVidia HDMI/DP,pcm=8 as 
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25
[    5.959715] input: HDA NVidia HDMI/DP,pcm=9 as 
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input26
[   12.169228] NET: Registered protocol family 38
[   12.242560]  md127: AHDI p1 p3
[   12.242565] md127: p1 size 3214817840 extends beyond EOD, truncated
[   12.496175] md: resync of RAID array md127
[   12.723492] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: 
(null)
[   12.751933] audit: type=1400 audit(1592722125.273:2): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=751 
comm="apparmor_parser"
[   12.751935] audit: type=1400 audit(1592722125.273:3): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" 
pid=751 comm="apparmor_parser"
[   12.752188] audit: type=1400 audit(1592722125.273:4): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=748 
comm="apparmor_parser"
[   12.752190] audit: type=1400 audit(1592722125.273:5): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="man_filter" pid=748 
comm="apparmor_parser"
[   12.752191] audit: type=1400 audit(1592722125.273:6): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="man_groff" pid=748 
comm="apparmor_parser"
[   12.752508] audit: type=1400 audit(1592722125.273:7): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="libreoffice-senddoc" 
pid=749 comm="apparmor_parser"
[   12.753811] audit: type=1400 audit(1592722125.277:8): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" 
pid=756 comm="apparmor_parser"
[   12.754185] audit: type=1400 audit(1592722125.277:9): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="libreoffice-oopslash" 
pid=754 comm="apparmor_parser"
[   12.755160] audit: type=1400 audit(1592722125.277:10): apparmor="STATUS" 
operation="profile_load" profile="unconfined" 
name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=750 
comm="apparmor_parser"
[   12.755162] audit: type=1400 audit(1592722125.277:11): apparmor="STATUS" 
operation="profile_load" profile="unconfined" 
name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" 
pid=750 comm="apparmor_parser"
[   13.181899] vboxdrv: loading out-of-tree module taints kernel.
[   13.188667] vboxdrv: Found 4 processor cores
[   13.208740] vboxdrv: TSC mode is Invariant, tentative frequency 3311999740 Hz
[   13.208741] vboxdrv: Successfully loaded version 6.1.10 (interface 
0x002d0001)
[   13.254903] r8169 0000:06:00.0: firmware: direct-loading firmware 
rtl_nic/rtl8168h-2.fw
[   13.255076] Generic PHY r8169-600:00: attached PHY driver [Generic PHY] 
(mii_bus:phy_addr=r8169-600:00, irq=IGNORE)
[   13.443896] VBoxNetFlt: Successfully started.
[   13.453578] VBoxNetAdp: Successfully started.
[   17.538178] r8169 0000:06:00.0 enp6s0: Link is Up - 1Gbps/Full - flow 
control rx/tx
[   17.688802] FS-Cache: Loaded
[   17.707689] FS-Cache: Netfs 'nfs' registered for caching
[   17.712526] Key type dns_resolver registered
[   17.733959] NFS: Registering the id_resolver key type
[   17.733965] Key type id_resolver registered
[   17.733965] Key type id_legacy registered
[   18.298099] Lockdown: ioperm is restricted; see 
https://wiki.debian.org/SecureBoot
[  168.373261] logitech-hidpp-device 0003:046D:406D.0009: HID++ 4.5 device 
connected.

** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Default string
chassis_version: Default string
bios_vendor: American Megatrends Inc.
bios_version: 3805
board_vendor: ASUSTeK COMPUTER INC.
board_name: Z170-P
board_version: Rev X.0x

** Loaded modules:
rpcsec_gss_krb5
auth_rpcgss
nfsv4
dns_resolver
nfs
lockd
grace
fscache
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
binfmt_misc
dm_crypt
algif_skcipher
af_alg
hid_logitech_hidpp
snd_hda_codec_hdmi
nls_ascii
nls_cp437
vfat
fat
intel_rapl
hid_logitech_dj
joydev
snd_usb_audio
snd_usbmidi_lib
snd_rawmidi
snd_seq_device
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
kvm
irqbypass
crct10dif_pclmul
crc32_pclmul
snd_hda_codec_realtek
snd_hda_codec_generic
eeepc_wmi
asus_wmi
efi_pstore
sparse_keymap
ghash_clmulni_intel
intel_cstate
wmi_bmof
intel_uncore
rfkill
snd_hda_intel
intel_rapl_perf
sg
pcspkr
snd_hda_codec
iTCO_wdt
efivars
iTCO_vendor_support
snd_hda_core
snd_hwdep
snd_pcm
snd_timer
snd
soundcore
mei_me
mei
pcc_cpufreq
evdev
acpi_pad
sunrpc
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
fscrypto
ecb
raid10
raid1
raid0
multipath
linear
dm_mirror
dm_region_hash
dm_log
dm_mod
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
xor
hid_generic
usbhid
hid
raid6_pq
libcrc32c
crc32c_generic
md_mod
sr_mod
sd_mod
cdrom
crc32c_intel
nouveau
aesni_intel
xhci_pci
mxm_wmi
i2c_algo_bit
ttm
aes_x86_64
crypto_simd
cryptd
glue_helper
i2c_i801
nvme
drm_kms_helper
ahci
nvme_core
libahci
xhci_hcd
libata
drm
r8169
usbcore
realtek
scsi_mod
libphy
usb_common
thermal
fan
wmi
video
button

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group 
default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: enp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP 
group default qlen 1000
    link/ether 9c:5c:8e:87:7f:5b brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.21/24 brd 192.168.1.255 scope global dynamic noprefixroute 
enp6s0
       valid_lft 82474sec preferred_lft 82474sec

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    
packets errs drop fifo colls carrier compressed
    lo:     229       5    0    0    0     0          0         0      229      
 5    0    0    0     0       0          0
enp6s0: 11849783   18389    0    0    0     0          0       212  2322872   
14327    0    0    0     0       0          0


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th 
Gen Core Processor Host Bridge/DRAM Registers [8086:191f] (rev 07)
        Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v5/E3-1500 v5/6th Gen 
Core Processor Host Bridge/DRAM Registers [1043:8694]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: skl_uncore

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen 
Core Processor PCIe Controller (x16) [8086:1901] (rev 07) (prog-if 00 [Normal 
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: f6000000-f70fffff
        Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:14.0 USB controller [0c03]: Intel Corporation 100 Series/C230 Series Chipset 
Family USB 3.0 xHCI Controller [8086:a12f] (rev 31) (prog-if 30 [XHCI])
        Subsystem: ASUSTeK Computer Inc. 100 Series/C230 Series Chipset Family 
USB 3.0 xHCI Controller [1043:8694]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 123
        Region 0: Memory at f7410000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

00:16.0 Communication controller [0780]: Intel Corporation 100 Series/C230 
Series Chipset Family MEI Controller #1 [8086:a13a] (rev 31)
        Subsystem: ASUSTeK Computer Inc. 100 Series/C230 Series Chipset Family 
MEI Controller [1043:8694]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 134
        Region 0: Memory at f742d000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: mei_me
        Kernel modules: mei_me

00:17.0 SATA controller [0106]: Intel Corporation 
Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] 
[8086:a102] (rev 31) (prog-if 01 [AHCI 1.0])
        Subsystem: ASUSTeK Computer Inc. Q170/Q150/B150/H170/H110/Z170/CM236 
Chipset SATA Controller [AHCI Mode] [1043:8694]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 120
        Region 0: Memory at f7428000 (32-bit, non-prefetchable) [size=8K]
        Region 1: Memory at f742c000 (32-bit, non-prefetchable) [size=256]
        Region 2: I/O ports at f050 [size=8]
        Region 3: I/O ports at f040 [size=4]
        Region 4: I/O ports at f020 [size=32]
        Region 5: Memory at f742b000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci
        Kernel modules: ahci

00:1b.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset 
Family PCI Express Root Port #17 [8086:a167] (rev f1) (prog-if 00 [Normal 
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset 
Family PCI Express Root Port #1 [8086:a110] (rev f1) (prog-if 00 [Normal 
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset 
Family PCI Express Root Port #3 [8086:a112] (rev f1) (prog-if 00 [Normal 
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 18
        Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset 
Family PCI Express Root Port #4 [8086:a113] (rev f1) (prog-if 00 [Normal 
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin D routed to IRQ 19
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: f7300000-f73fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset 
Family PCI Express Root Port #5 [8086:a114] (rev f1) (prog-if 00 [Normal 
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
        Memory behind bridge: f7200000-f72fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset 
Family PCI Express Root Port #9 [8086:a118] (rev f1) (prog-if 00 [Normal 
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
        Memory behind bridge: f7100000-f71fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1f.0 ISA bridge [0601]: Intel Corporation Z170 Chipset LPC/eSPI Controller 
[8086:a145] (rev 31)
        Subsystem: ASUSTeK Computer Inc. Z170 Chipset LPC/eSPI Controller 
[1043:8694]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:1f.2 Memory controller [0580]: Intel Corporation 100 Series/C230 Series 
Chipset Family Power Management Controller [8086:a121] (rev 31)
        Subsystem: ASUSTeK Computer Inc. 100 Series/C230 Series Chipset Family 
Power Management Controller [1043:8694]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Region 0: Memory at f7424000 (32-bit, non-prefetchable) [disabled] 
[size=16K]

00:1f.3 Audio device [0403]: Intel Corporation 100 Series/C230 Series Chipset 
Family HD Audio Controller [8086:a170] (rev 31)
        Subsystem: ASUSTeK Computer Inc. 100 Series/C230 Series Chipset Family 
HD Audio Controller [1043:86c7]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 135
        Region 0: Memory at f7420000 (64-bit, non-prefetchable) [size=16K]
        Region 4: Memory at f7400000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:1f.4 SMBus [0c05]: Intel Corporation 100 Series/C230 Series Chipset Family 
SMBus [8086:a123] (rev 31)
        Subsystem: ASUSTeK Computer Inc. 100 Series/C230 Series Chipset Family 
SMBus [1043:8694]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f742a000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at f000 [size=32]
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GM204 [GeForce GTX 
970] [10de:13c2] (rev a1) (prog-if 00 [VGA controller])
        Subsystem: eVga.com. Corp. GM204 [GeForce GTX 970] [3842:1972]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 124
        Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
        Region 5: I/O ports at e000 [size=128]
        Expansion ROM at 000c0000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: nouveau
        Kernel modules: nouveau

01:00.1 Audio device [0403]: NVIDIA Corporation GM204 High Definition Audio 
Controller [10de:0fbb] (rev a1)
        Subsystem: eVga.com. Corp. GM204 High Definition Audio Controller 
[3842:1972]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at f7080000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

04:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI 
Bridge [1b21:1080] (rev 04) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 255
        Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
        Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. 
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
        Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit 
Ethernet Controller [1043:8677]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: I/O ports at d000 [size=256]
        Region 2: Memory at f7304000 (64-bit, non-prefetchable) [size=4K]
        Region 4: Memory at f7300000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: r8169
        Kernel modules: r8169

07:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host 
Controller [1b21:1142] (prog-if 30 [XHCI])
        Subsystem: ASUSTeK Computer Inc. ASM1042A USB 3.0 Host Controller 
[1043:86a0]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f7200000 (64-bit, non-prefetchable) [size=32K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

08:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe 
SSD Controller SM981/PM981/PM983 [144d:a808] (prog-if 02 [NVM Express])
        Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981 
[144d:a801]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        NUMA node: 0
        Region 0: Memory at f7100000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: nvme
        Kernel modules: nvme


** USB devices:
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 0b05:189d ASUSTek Computer, Inc. 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 0bda:0412 Realtek Semiconductor Corp. 
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 0b95:6801 ASIX Electronics Corp. 
Bus 001 Device 005: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 004: ID 046d:c328 Logitech, Inc. Corded Keyboard K280e
Bus 001 Device 003: ID 0b95:6802 ASIX Electronics Corp. 
Bus 001 Device 002: ID 0bda:5412 Realtek Semiconductor Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 10.4
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.19.0-9-amd64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_OOT_MODULE
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), 
LANGUAGE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-4.19.0-9-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.133+deb10u1
ii  kmod                                    26-1
ii  linux-base                              4.6

Versions of packages linux-image-4.19.0-9-amd64 recommends:
ii  apparmor             2.13.2-10
ii  firmware-linux-free  3.4

Versions of packages linux-image-4.19.0-9-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-efi-amd64          2.02+dfsg1-20
pn  linux-doc-4.19          <none>

Versions of packages linux-image-4.19.0-9-amd64 is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
ii  firmware-misc-nonfree     20190114-2
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
ii  firmware-realtek          20190114-2
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

cat /proc/mdstat 
Personalities : [raid6] [raid5] [raid4] [linear] [multipath] [raid0] [raid1] 
[raid10] 
md127 : active raid5 sda1[0] sdb1[1] sdc1[3]
      1677457408 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU]
      [==============>......]  resync = 71.8% (602597124/838728704) 
finish=30.2min speed=130067K/sec
      bitmap: 3/7 pages [12KB], 65536KB chunk

unused devices: <none>


sudo dmesg | grep -i md127
[    2.779616] md/raid:md127: not clean -- starting background reconstruction
[    2.779625] md/raid:md127: device sda1 operational as raid disk 0
[    2.779626] md/raid:md127: device sdb1 operational as raid disk 1
[    2.779626] md/raid:md127: device sdc1 operational as raid disk 2
[    2.779897] md/raid:md127: raid level 5 active with 3 out of 3 devices, 
algorithm 2
[    2.779998] md127: bitmap file is out of date (7476 < 7477) -- forcing full 
recovery
[    2.780006] md127: bitmap file is out of date, doing full recovery
[    2.863944] md127: detected capacity change from 0 to 1717716385792
[    2.870700]  md127: AHDI p1 p3
[    2.870727] md127: p1 size 3214817840 extends beyond EOD, truncated
[   12.242560]  md127: AHDI p1 p3
[   12.242565] md127: p1 size 3214817840 extends beyond EOD, truncated
[   12.496175] md: resync of RAID array md127

sudo mdadm -E /dev/sd[abc]1
/dev/sda1:
          Magic : a92b4efc
        Version : 1.2
    Feature Map : 0x1
     Array UUID : d8bb18ea:2efe13be:08bbd325:573861e3
           Name : eric:linux-home  (local to host eric)
  Creation Time : Fri Apr  3 09:54:05 2020
     Raid Level : raid5
   Raid Devices : 3

 Avail Dev Size : 1677457408 (799.87 GiB 858.86 GB)
     Array Size : 1677457408 (1599.75 GiB 1717.72 GB)
    Data Offset : 264192 sectors
   Super Offset : 8 sectors
   Unused Space : before=264112 sectors, after=0 sectors
          State : active
    Device UUID : cfb60f87:c1dc7436:12476970:670c3d33

Internal Bitmap : 8 sectors from superblock
    Update Time : Sun Jun 21 09:59:28 2020
  Bad Block Log : 512 entries available at offset 16 sectors
       Checksum : 7b9bc80b - correct
         Events : 9327

         Layout : left-symmetric
     Chunk Size : 512K

   Device Role : Active device 0
   Array State : AAA ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdb1:
          Magic : a92b4efc
        Version : 1.2
    Feature Map : 0x1
     Array UUID : d8bb18ea:2efe13be:08bbd325:573861e3
           Name : eric:linux-home  (local to host eric)
  Creation Time : Fri Apr  3 09:54:05 2020
     Raid Level : raid5
   Raid Devices : 3

 Avail Dev Size : 1677457408 (799.87 GiB 858.86 GB)
     Array Size : 1677457408 (1599.75 GiB 1717.72 GB)
    Data Offset : 264192 sectors
   Super Offset : 8 sectors
   Unused Space : before=264112 sectors, after=0 sectors
          State : active
    Device UUID : f4050635:607d5caa:bacbba07:0d2f7719

Internal Bitmap : 8 sectors from superblock
    Update Time : Sun Jun 21 09:59:28 2020
  Bad Block Log : 512 entries available at offset 16 sectors
       Checksum : 1b055f1e - correct
         Events : 9327

         Layout : left-symmetric
     Chunk Size : 512K

   Device Role : Active device 1
   Array State : AAA ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdc1:
          Magic : a92b4efc
        Version : 1.2
    Feature Map : 0x1
     Array UUID : d8bb18ea:2efe13be:08bbd325:573861e3
           Name : eric:linux-home  (local to host eric)
  Creation Time : Fri Apr  3 09:54:05 2020
     Raid Level : raid5
   Raid Devices : 3

 Avail Dev Size : 1677457408 (799.87 GiB 858.86 GB)
     Array Size : 1677457408 (1599.75 GiB 1717.72 GB)
    Data Offset : 264192 sectors
   Super Offset : 8 sectors
   Unused Space : before=264112 sectors, after=0 sectors
          State : active
    Device UUID : 2b91656b:2c9a16df:3b6becb3:6a5e91d9

Internal Bitmap : 8 sectors from superblock
    Update Time : Sun Jun 21 09:59:31 2020
  Bad Block Log : 512 entries available at offset 16 sectors
       Checksum : f26ad606 - correct
         Events : 9328

         Layout : left-symmetric
     Chunk Size : 512K

   Device Role : Active device 2
   Array State : AAA ('A' == active, '.' == missing, 'R' == replacing)


for d in sda sdb sdc; do sudo smartctl -A /dev/$d;done
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-9-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       
-       0
  3 Spin_Up_Time            0x0027   171   169   021    Pre-fail  Always       
-       2433
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       
-       70
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       
-       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       
-       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       
-       1216
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       
-       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       
-       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       
-       70
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       
-       0
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       
-       158
194 Temperature_Celsius     0x0022   109   108   000    Old_age   Always       
-       34
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       
-       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       
-       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      
-       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       
-       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      
-       0

smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-9-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       
-       0
  3 Spin_Up_Time            0x0027   170   169   021    Pre-fail  Always       
-       2458
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       
-       120
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       
-       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       
-       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       
-       1216
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       
-       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       
-       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       
-       70
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       
-       0
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       
-       151
194 Temperature_Celsius     0x0022   111   109   000    Old_age   Always       
-       32
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       
-       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       
-       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      
-       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       
-       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      
-       0

smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-9-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       
-       0
  3 Spin_Up_Time            0x0027   172   170   021    Pre-fail  Always       
-       2375
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       
-       105
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       
-       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       
-       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       
-       1216
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       
-       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       
-       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       
-       70
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       
-       0
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       
-       141
194 Temperature_Celsius     0x0022   109   108   000    Old_age   Always       
-       34
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       
-       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       
-       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      
-       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       
-       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      
-       0

Reply via email to