Your message dated Sat, 24 Apr 2021 07:59:55 -0700 (PDT)
with message-id <[email protected]>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #702362,
regarding linux-image-3.2.0-4-amd64: Wireless Lan driver brcmsmac not
connecting to channels 12, 13 & 14
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
702362: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=702362
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 3.2.35-2
Severity: normal
Dear Maintainer,
the driver brcmsmac cannot connect to wifi channels 12-14.
After installing the patch from this blog:
http://133nux.blogspot.de/2011/12/missing-channel-13-this-time-broadcom.html
I can connect on channel 12 & 13, but still not on channel 14. The regulatory
domain is correctly set to JP.
jochen@Aspire:~$ sudo iw reg get
country JP:
(2402 - 2472 @ 40), (N/A, 20)
(2457 - 2482 @ 20), (N/A, 20)
(2474 - 2494 @ 20), (N/A, 20), NO-OFDM
(4910 - 4930 @ 10), (N/A, 23)
(4910 - 4990 @ 40), (N/A, 23)
(4930 - 4950 @ 10), (N/A, 23)
(5030 - 5045 @ 10), (N/A, 23)
(5030 - 5090 @ 40), (N/A, 23)
(5050 - 5060 @ 10), (N/A, 23)
(5170 - 5250 @ 40), (N/A, 20)
(5250 - 5330 @ 40), (N/A, 20), DFS
(5490 - 5710 @ 40), (N/A, 23), DFS
jochen@Aspire:~$ sudo iwlist freq
lo no frequency information.
wlan0 14 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Channel 14 : 2.484 GHz
Current Frequency:2.412 GHz (Channel 1)
I have the same symptoms as mentioned in the blog
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 ([email protected]) (gcc version 4.6.3
(Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=6cba8902-d28b-490e-a7c2-c1cbd8c9e57a ro quiet
** Not tainted
** Kernel log:
[ 12.920935] FS-Cache: Netfs 'nfs' registered for caching
[ 12.947077] Installing knfsd (copyright (C) 1996 [email protected]).
[ 14.862635] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input12
[ 17.770133] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.770143] Bluetooth: BNEP filters: protocol multicast
[ 17.770665] Bluetooth: RFCOMM TTY layer initialized
[ 17.770674] Bluetooth: RFCOMM socket layer initialized
[ 17.770679] Bluetooth: RFCOMM ver 1.11
[ 17.879943] lp: driver loaded but no devices found
[ 18.078969] ppdev: user-space parallel port driver
[ 22.914517] atl1c 0000:02:00.0: irq 43 for MSI/MSI-X
[ 22.914652] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full
Duplex>
[ 22.973549] ieee80211 phy0: brcms_ops_config: change monitor mode: false
(implement)
[ 22.973556] ieee80211 phy0: brcms_ops_config: change power-save mode: false
(implement)
[ 22.974058] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false
(implement)
[ 22.974526] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.019048] wlan0: authenticate with 10:bf:48:e6:28:42 (try 1)
[ 26.216079] wlan0: authenticate with 10:bf:48:e6:28:42 (try 2)
[ 26.416187] wlan0: authenticate with 10:bf:48:e6:28:42 (try 3)
[ 26.616072] wlan0: authentication with 10:bf:48:e6:28:42 timed out
[ 27.555633] wlan0: authenticate with 10:bf:48:e6:28:42 (try 1)
[ 27.752170] wlan0: authenticate with 10:bf:48:e6:28:42 (try 2)
[ 27.952154] wlan0: authenticate with 10:bf:48:e6:28:42 (try 3)
[ 28.152050] wlan0: authentication with 10:bf:48:e6:28:42 timed out
[ 29.095183] wlan0: authenticate with 10:bf:48:e6:28:42 (try 1)
[ 29.292139] wlan0: authenticate with 10:bf:48:e6:28:42 (try 2)
[ 29.492139] wlan0: authenticate with 10:bf:48:e6:28:42 (try 3)
[ 29.692170] wlan0: authentication with 10:bf:48:e6:28:42 timed out
[ 30.628803] wlan0: authenticate with 10:bf:48:e6:28:42 (try 1)
[ 30.828138] wlan0: authenticate with 10:bf:48:e6:28:42 (try 2)
[ 31.028183] wlan0: authenticate with 10:bf:48:e6:28:42 (try 3)
[ 31.228146] wlan0: authentication with 10:bf:48:e6:28:42 timed out
[ 32.166659] wlan0: authenticate with 10:bf:48:e6:28:42 (try 1)
[ 32.364518] wlan0: authenticate with 10:bf:48:e6:28:42 (try 2)
[ 32.564151] wlan0: authenticate with 10:bf:48:e6:28:42 (try 3)
[ 32.764155] wlan0: authentication with 10:bf:48:e6:28:42 timed out
[ 33.698677] wlan0: authenticate with 10:bf:48:e6:28:42 (try 1)
[ 33.896064] wlan0: authenticate with 10:bf:48:e6:28:42 (try 2)
[ 34.064103] eth0: no IPv6 routers present
[ 34.097543] wlan0: authenticate with 10:bf:48:e6:28:42 (try 3)
[ 34.296137] wlan0: authentication with 10:bf:48:e6:28:42 timed out
[ 35.225965] wlan0: authenticate with 10:bf:48:e6:28:42 (try 1)
[ 35.424135] wlan0: authenticate with 10:bf:48:e6:28:42 (try 2)
[ 35.624136] wlan0: authenticate with 10:bf:48:e6:28:42 (try 3)
[ 35.824218] wlan0: authentication with 10:bf:48:e6:28:42 timed out
[ 36.757779] wlan0: authenticate with 10:bf:48:e6:28:42 (try 1)
[ 36.956056] wlan0: authenticate with 10:bf:48:e6:28:42 (try 2)
[ 37.156133] wlan0: authenticate with 10:bf:48:e6:28:42 (try 3)
[ 37.356135] wlan0: authentication with 10:bf:48:e6:28:42 timed out
[ 38.297509] wlan0: authenticate with 10:bf:48:e6:28:42 (try 1)
[ 38.496134] wlan0: authenticate with 10:bf:48:e6:28:42 (try 2)
[ 38.696157] wlan0: authenticate with 10:bf:48:e6:28:42 (try 3)
[ 38.896049] wlan0: authentication with 10:bf:48:e6:28:42 timed out
[ 39.833628] wlan0: authenticate with 10:bf:48:e6:28:42 (try 1)
[ 40.032067] wlan0: authenticate with 10:bf:48:e6:28:42 (try 2)
[ 40.232098] wlan0: authenticate with 10:bf:48:e6:28:42 (try 3)
[ 40.432035] wlan0: authentication with 10:bf:48:e6:28:42 timed out
[ 41.376633] wlan0: authenticate with 10:bf:48:e6:28:42 (try 1)
[ 41.576140] wlan0: authenticate with 10:bf:48:e6:28:42 (try 2)
[ 41.776077] wlan0: authenticate with 10:bf:48:e6:28:42 (try 3)
[ 41.976055] wlan0: authentication with 10:bf:48:e6:28:42 timed out
[ 42.907043] wlan0: authenticate with 10:bf:48:e6:28:42 (try 1)
[ 43.104037] wlan0: authenticate with 10:bf:48:e6:28:42 (try 2)
[ 43.304373] wlan0: authenticate with 10:bf:48:e6:28:42 (try 3)
[ 43.504138] wlan0: authentication with 10:bf:48:e6:28:42 timed out
[ 44.446796] wlan0: authenticate with 10:bf:48:e6:28:42 (try 1)
[ 44.644155] wlan0: authenticate with 10:bf:48:e6:28:42 (try 2)
[ 44.844160] wlan0: authenticate with 10:bf:48:e6:28:42 (try 3)
[ 45.044062] wlan0: authentication with 10:bf:48:e6:28:42 timed out
[ 45.975028] wlan0: authenticate with 10:bf:48:e6:28:42 (try 1)
[ 46.172132] wlan0: authenticate with 10:bf:48:e6:28:42 (try 2)
[ 46.372033] wlan0: authenticate with 10:bf:48:e6:28:42 (try 3)
[ 46.572071] wlan0: authentication with 10:bf:48:e6:28:42 timed out
[ 47.510418] wlan0: authenticate with 10:bf:48:e6:28:42 (try 1)
[ 47.708027] wlan0: authenticate with 10:bf:48:e6:28:42 (try 2)
[ 47.908028] wlan0: authenticate with 10:bf:48:e6:28:42 (try 3)
[ 48.108134] wlan0: authentication with 10:bf:48:e6:28:42 timed out
[ 49.039290] wlan0: authenticate with 10:bf:48:e6:28:42 (try 1)
[ 49.237113] wlan0: authenticate with 10:bf:48:e6:28:42 (try 2)
[ 49.436134] wlan0: authenticate with 10:bf:48:e6:28:42 (try 3)
[ 49.636072] wlan0: authentication with 10:bf:48:e6:28:42 timed out
[ 59.867900] wlan0: authenticate with bc:05:43:c4:36:16 (try 1)
[ 59.876219] wlan0: authenticated
[ 59.877388] wlan0: associate with bc:05:43:c4:36:16 (try 1)
[ 59.884872] wlan0: RX AssocResp from bc:05:43:c4:36:16 (capab=0x431 status=0
aid=2)
[ 59.884883] wlan0: associated
[ 59.885339] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true
(implement)
[ 59.885355] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 59.885365] ieee80211 phy0: changing basic rates failed: -22
[ 59.885373] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering:
enabled true, count 0 (implement)
[ 59.886063] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 59.886423] cfg80211: Calling CRDA for country: DE
[ 60.004254] cfg80211: Regulatory domain changed to country: DE
[ 60.004264] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 60.004274] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 60.004281] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 60.004288] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 60.004294] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A,
2698 mBm)
[ 60.087876] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering:
enabled true, count 1 (implement)
[ 70.864103] wlan0: no IPv6 routers present
** Model information
sys_vendor: Acer
product_name: AO521
product_version: Not Applicable
chassis_vendor: Acer
chassis_version: N/A
bios_vendor: Phoenix Technologies LTD
bios_version: V1.11
board_vendor: Acer
board_name: JV01-NL
board_version: Not Applicable
** Loaded modules:
cryptd
aes_x86_64
aes_generic
parport_pc
ppdev
lp
parport
bnep
rfcomm
autofs4
uinput
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
arc4
uvcvideo
videodev
v4l2_compat_ioctl32
media
joydev
brcmsmac
cordic
snd_hda_codec_hdmi
radeon
crc8
snd_hda_codec_conexant
brcmutil
snd_hda_intel
mac80211
cfg80211
snd_hda_codec
ttm
drm_kms_helper
drm
i2c_algo_bit
acer_wmi
snd_hwdep
snd_pcm
snd_seq
snd_seq_device
snd_page_alloc
psmouse
edac_mce_amd
pcspkr
serio_raw
sparse_keymap
evdev
btusb
bluetooth
k10temp
powernow_k8
mperf
edac_core
shpchp
sp5100_tco
i2c_piix4
rfkill
i2c_core
snd_timer
battery
ac
snd
soundcore
power_supply
video
processor
wmi
button
hid_logitech_dj
usbhid
hid
ext4
crc16
jbd2
mbcache
sg
sd_mod
crc_t10dif
thermal
thermal_sys
ahci
libahci
ohci_hcd
atl1c
ehci_hcd
libata
usbcore
usb_common
scsi_mod
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge
[1022:9601]
Subsystem: Acer Incorporated [ALI] Device [1025:043d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI
bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: d0000000-d01fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI
bridge (PCIE port 0) [1022:9604] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: d0200000-d02fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI
bridge (PCIE port 1) [1022:9605] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: d0300000-d03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI
1.0])
Subsystem: Acer Incorporated [ALI] Device [1025:043d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at 8440 [size=8]
Region 1: I/O ports at 8430 [size=4]
Region 2: I/O ports at 8420 [size=8]
Region 3: I/O ports at 8410 [size=4]
Region 4: I/O ports at 8400 [size=16]
Region 5: Memory at d0606800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:043d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0404000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:043d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0606000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:043d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0405000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:043d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0606400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus
Controller [1002:4385] (rev 41)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia
(Intel HDA) [1002:4383] (rev 40)
Subsystem: Acer Incorporated [ALI] Device [1025:043d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Acer Incorporated [ALI] Device [1025:043d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to
PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI
RS880M [Mobility Radeon HD 4200 Series] [1002:9712] (prog-if 00 [VGA
controller])
Subsystem: Acer Incorporated [ALI] Device [1025:043d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at d0000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
01:05.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RS880 HDMI
Audio [Radeon HD 4200 Series] [1002:970f]
Subsystem: Advanced Micro Devices [AMD] nee ATI Device [1002:9712]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at d0110000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8152 v1.1
Fast Ethernet [1969:2060] (rev c1)
Subsystem: Acer Incorporated [ALI] Device [1025:043d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at d0200000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at a000 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n
Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Broadcom Corporation Device [14e4:0510]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d0300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: brcmsmac
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 064e:a219 Suyin Corp. 1.3M WebCam (notebook emachines
E730, Acer sub-brand)
Bus 004 Device 002: ID 0489:e010 Foxconn / Hon Hai
Bus 004 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 0.36+wheezy.1
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--- End Message ---
--- Begin Message ---
Hi
This bug was filed for a very old kernel or the bug is old itself
without resolution.
If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from backports
please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.
Regards,
Salvatore
--- End Message ---
