Your message dated Sat, 01 May 2021 08:10:13 -0700 (PDT)
with message-id <[email protected]>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #702885,
regarding linux-image-3.8-trunk-amd64: Samsung NP900X3C display does not resume
from suspend
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
702885: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=702885
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 3.8.2-1~experimental.1
Severity: important
Since upgrading to kernel 3.8.2-1~experimental.1 my Samsung NP900X3C
freezes when I try to resume from sleep/suspend. I noticed that the caps
lock key was usually still working (however, on one occasion it wasn't,
so I presume the machine had totally locked), so I tried ssh'ing in and
discovered I could recover it by restarting gdm3.
I realise the ability to restart X makes it look more like a userland
bug, and that these Samsung Ultrabook/laptops are notorious for broken
ACPI behaviour, but this problem seems to be specific to kernel 3.8. On
downgrading to 3.2.39-2 or 3.7.8-1~experimental.1 the problem goes away.
-- Package-specific info:
** Version:
Linux version 3.8-trunk-amd64 ([email protected]) (gcc version
4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.8.2-1~experimental.1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.8-trunk-amd64
root=UUID=051093c4-6567-4984-a8ea-3ffbd736402f ro elevator=noop quiet
** Not tainted
** Kernel log:
[ 139.684324] r8169 0000:02:00.0: System wakeup disabled by ACPI
[ 139.685734] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 139.907624] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[ 140.002530] btusb 1-1.5:1.0: no reset_resume for driver btusb?
[ 140.002532] btusb 1-1.5:1.1: no reset_resume for driver btusb?
[ 140.003339] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 140.005747] ata1.00: configured for UDMA/133
[ 140.019452] sd 0:0:0:0: [sda] Starting disk
[ 140.071498] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[ 140.755475] PM: resume of devices complete after 1072.659 msecs
[ 140.755915] PM: Finishing wakeup.
[ 140.755917] Restarting tasks ... done.
[ 140.763229] video LNXVIDEO:00: Restoring backlight state
[ 141.009715] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 141.016387] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[ 141.250245] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 141.367794] r8169 0000:02:00.0 eth0: link down
[ 141.367853] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 141.653851] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 147.811872] wlan0: authenticate with 00:24:b2:49:13:e4
[ 147.819039] wlan0: capabilities/regulatory prevented using AP HT/VHT
configuration, downgraded
[ 147.820021] wlan0: send auth to 00:24:b2:49:13:e4 (try 1/3)
[ 147.822302] wlan0: authenticated
[ 147.826000] wlan0: associate with 00:24:b2:49:13:e4 (try 1/3)
[ 147.830257] wlan0: RX AssocResp from 00:24:b2:49:13:e4 (capab=0x411 status=0
aid=4)
[ 147.853269] wlan0: associated
[ 147.853379] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 317.899938] wlan0: deauthenticating from 00:24:b2:49:13:e4 by local choice
(reason=3)
[ 317.929155] cfg80211: Calling CRDA to update world regulatory domain
[ 317.934752] cfg80211: World regulatory domain updated:
[ 317.934756] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 317.934759] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 317.934761] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 317.934762] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 317.934764] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 317.934765] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 319.004721] PM: Syncing filesystems ... done.
[ 319.005229] PM: Preparing system for mem sleep
[ 319.042057] (NULL device *): firmware: agent loaded iwlwifi-6000g2b-6.ucode
into memory
[ 319.042267] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 319.057512] Freezing remaining freezable tasks ... (elapsed 0.01 seconds)
done.
[ 319.073476] PM: Entering mem sleep
[ 319.073526] Suspending console(s) (use no_console_suspend to debug)
[ 319.073747] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 319.073823] sd 0:0:0:0: [sda] Stopping disk
[ 320.192089] PM: suspend of devices complete after 1119.799 msecs
[ 320.192220] PM: late suspend of devices complete after 0.129 msecs
[ 320.208381] r8169 0000:02:00.0: System wakeup enabled by ACPI
[ 320.271968] PM: noirq suspend of devices complete after 79.840 msecs
[ 320.272190] ACPI: Preparing to enter system sleep state S3
[ 320.296039] PM: Saving platform NVS memory
[ 320.298301] Disabling non-boot CPUs ...
[ 320.300133] smpboot: CPU 1 is now offline
[ 320.403741] smpboot: CPU 2 is now offline
[ 320.405630] smpboot: CPU 3 is now offline
[ 320.405975] Extended CMOS year: 2000
[ 320.407237] ACPI: Low-level resume complete
[ 320.407285] PM: Restoring platform NVS memory
[ 320.407672] Extended CMOS year: 2000
[ 320.407741] Enabling non-boot CPUs ...
[ 320.407900] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 320.421951] CPU1 is up
[ 320.422088] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 320.436118] CPU2 is up
[ 320.436274] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 320.450496] CPU3 is up
[ 320.454845] ACPI: Waking up from system sleep state S3
[ 320.629447] PM: noirq resume of devices complete after 128.142 msecs
[ 320.629586] PM: early resume of devices complete after 0.093 msecs
[ 320.629621] i915 0000:00:02.0: setting latency timer to 64
[ 320.629674] mei 0000:00:16.0: irq 47 for MSI/MSI-X
[ 320.629733] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 320.629761] ahci 0000:00:1f.2: setting latency timer to 64
[ 320.629771] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 320.629864] r8169 0000:02:00.0: System wakeup disabled by ACPI
[ 320.853196] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[ 320.947977] btusb 1-1.5:1.0: no reset_resume for driver btusb?
[ 320.947979] btusb 1-1.5:1.1: no reset_resume for driver btusb?
[ 320.948838] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 320.950961] ata1.00: configured for UDMA/133
[ 320.964942] sd 0:0:0:0: [sda] Starting disk
[ 321.016991] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[ 321.700959] PM: resume of devices complete after 1072.648 msecs
[ 321.701428] PM: Finishing wakeup.
[ 321.701429] Restarting tasks ... done.
[ 321.710097] video LNXVIDEO:00: Restoring backlight state
[ 321.938401] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 321.945045] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[ 322.175698] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 322.289274] r8169 0000:02:00.0 eth0: link down
[ 322.289358] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 322.427504] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 328.782491] wlan0: authenticate with 00:24:b2:49:13:e4
[ 328.789724] wlan0: capabilities/regulatory prevented using AP HT/VHT
configuration, downgraded
[ 328.790664] wlan0: send auth to 00:24:b2:49:13:e4 (try 1/3)
[ 328.792895] wlan0: authenticated
[ 328.795483] wlan0: associate with 00:24:b2:49:13:e4 (try 1/3)
[ 328.799686] wlan0: RX AssocResp from 00:24:b2:49:13:e4 (capab=0x411 status=0
aid=4)
[ 328.823489] wlan0: associated
[ 328.823615] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
** Model information
sys_vendor: SAMSUNG ELECTRONICS CO., LTD.
product_name: 900X3C/900X4C/900X4D
product_version: 0.1
chassis_vendor: SAMSUNG ELECTRONICS CO., LTD.
chassis_version: 0.1
bios_vendor: Phoenix Technologies Ltd.
bios_version: P01AAC
board_vendor: SAMSUNG ELECTRONICS CO., LTD.
board_name: SAMSUNG_NP1234567890
board_version: FAB1
** Loaded modules:
hidp
hid
parport_pc
ppdev
lp
parport
bnep
rfcomm
binfmt_misc
uinput
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
loop
fuse
snd_hda_codec_hdmi
snd_hda_codec_realtek
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
joydev
coretemp
kvm_intel
kvm
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
ablk_helper
cryptd
xts
lrw
gf128mul
arc4
iTCO_wdt
iTCO_vendor_support
evdev
iwldvm
mac80211
samsung_laptop
microcode
battery
psmouse
snd_hda_intel
iwlwifi
snd_hda_codec
i915
serio_raw
snd_hwdep
snd_pcm
snd_page_alloc
video
snd_seq
drm_kms_helper
snd_seq_device
drm
btusb
snd_timer
pcspkr
acpi_cpufreq
bluetooth
cfg80211
ac
mperf
i2c_i801
lpc_ich
i2c_algo_bit
snd
mfd_core
i2c_core
mei
rfkill
processor
button
soundcore
ext4
crc16
jbd2
mbcache
sg
sd_mod
crc_t10dif
r8169
mii
fan
thermal
thermal_sys
ahci
libahci
libata
scsi_mod
ehci_pci
xhci_hcd
ehci_hcd
usbcore
usb_common
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state
DOWN qlen 1000
link/ether e8:03:9a:b7:de:92 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether c4:85:08:34:26:5f brd ff:ff:ff:ff:ff:ff
inet 192.168.0.12/24 brd 192.168.0.255 scope global wlan0
inet6 fe80::c685:8ff:fe34:265f/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
eth0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
lo: 1760 28 0 0 0 0 0 0 1760
28 0 0 0 0 0 0
wlan0: 2362865 1864 0 0 0 0 0 0 181917
1341 0 0 0 0 0 0
*** Protocol statistics:
Ip:
1915 total packets received
0 forwarded
0 incoming packets discarded
1884 incoming packets delivered
1292 requests sent out
2 dropped because of missing route
Icmp:
17 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 17
8 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 8
IcmpMsg:
InType3: 17
OutType3: 8
Tcp:
15 active connections openings
2 passive connection openings
6 failed connection attempts
0 connection resets received
1 connections established
1761 segments received
1159 segments send out
18 segments retransmited
0 bad segments received.
6 resets sent
Udp:
98 packets received
8 packets to unknown port received.
0 packet receive errors
101 packets sent
UdpLite:
TcpExt:
3 packets pruned from receive queue because of socket buffer overrun
1 TCP sockets finished time wait in fast timer
17 delayed acks sent
4 packets directly queued to recvmsg prequeue.
1368 packet headers predicted
46 acknowledgments not containing data payload received
93 predicted acknowledgments
18 retransmits in slow start
8 packets collapsed in receive queue due to low socket buffer
TCPRcvCoalesce: 136
TCPOFOQueue: 136
IpExt:
InNoRoutes: 3
InMcastPkts: 58
OutMcastPkts: 64
InBcastPkts: 17
InOctets: 2347354
OutOctets: 125546
InMcastOctets: 10855
OutMcastOctets: 11035
InBcastOctets: 4043
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM
Controller [8086:0154] (rev 09)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core
processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series
Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f0705000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset
Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at f0700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f0600000-f06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Prefetchable memory behind bridge: 00000000f0400000-00000000f04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 5 [8086:1e18] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f0500000-f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0709000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM75 Express Chipset LPC
Controller [8086:1e5d] (rev 04)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family
6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 45
Region 0: I/O ports at 3088 [size=8]
Region 1: I/O ports at 3094 [size=4]
Region 2: I/O ports at 3080 [size=8]
Region 3: I/O ports at 3090 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at f0708000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family
SMBus Controller [8086:1e22] (rev 04)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f0704000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
01:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6235
[8086:088e] (rev 24)
Subsystem: Intel Corporation Centrino Advanced-N 6235 AGN [8086:4060]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f0600000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at f0404000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:00.0 USB controller [0c03]: Renesas Technology Corp. Device [1912:0015] (rev
02) (prog-if 30 [XHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c0cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 8087:07da Intel Corp.
Bus 001 Device 004: ID 2232:1024
-- System Information:
Debian Release: 7.0
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.8-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.8-trunk-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.110
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.8-trunk-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.8-trunk-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27
pn linux-doc-3.8 <none>
Versions of packages linux-image-3.8-trunk-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.36+wheezy.1
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36+wheezy.1
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.8-trunk-amd64/prerm/removing-running-kernel-3.8-trunk-amd64:
true
linux-image-3.8-trunk-amd64/postinst/depmod-error-initrd-3.8-trunk-amd64:
false
* linux-image-3.8-trunk-amd64/postinst/missing-firmware-3.8-trunk-amd64:
linux-image-3.8-trunk-amd64/postinst/ignoring-ramdisk:
--- End Message ---
--- Begin Message ---
Hi
This bug was filed for a very old kernel or the bug is old itself
without resolution.
If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from backports
please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.
Regards,
Salvatore
--- End Message ---
