Your message dated Sun, 27 Sep 2026 10:10:03 +0200 with message-id <cjmnq43n7muehcgeg3wonh36tnnjzethwgeq3falxa3m6nren4@6hhckrepuwwi> and subject line Re: Bug#1149116: linux-image-6.1.0-53-686: i386 686 kernel selects CONFIG_MGEODE_LX instead of CONFIG_M686 has caused the Debian Bug report #1149116, regarding linux-image-6.1.0-53-686: i386 686 kernel selects CONFIG_MGEODE_LX instead of CONFIG_M686 to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 1149116: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1149116 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: src:linux Version: 6.1.187-1 Severity: normal X-Debbugs-Cc: [email protected] Dear Maintainer, The Debian Bookworm i386 kernel configuration contains: CONFIG_MGEODE_LX=y in /boot/config-6.1.0-53-686. For a generic 686 kernel, selecting the AMD Geode LX CPU target appears incorrect. The -686 kernel should target the i686 baseline instead: CONFIG_M686=y CONFIG_MGEODE_LX is a very specific CPU target intended for AMD Geode GX/LX processors, not a generic i686-compatible processor. This choice may result in suboptimal CPU tuning for normal i686 hardware and does not reflect the intended purpose of the -686 flavour. Please consider changing the CPU configuration to CONFIG_M686=y or explain the reason for selecting the Geode LX target in the generic 686 kernel flavour. -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03) Subsystem: Toshiba Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port [8086:2591] (rev 03) (prog-if 00 [Normal decode]) Subsystem: Toshiba Corporation Mobile 915GM/PM Express PCI Express Root Port [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 11 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: c000-dfff [size=8K] [16-bit] Memory behind bridge: c0000000-cfffffff [size=256M] [32-bit] Prefetchable memory behind bridge: 90000000-9fffffff [size=256M] [32-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode]) Subsystem: Toshiba Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 10 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: a000-bfff [size=8K] [16-bit] Memory behind bridge: bc000000-bfffffff [size=64M] [32-bit] Prefetchable memory behind bridge: 8c000000-8fffffff [size=64M] [32-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04) (prog-if 00 [Normal decode]) Subsystem: Toshiba Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin B routed to IRQ 11 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 8000-9fff [size=8K] [16-bit] Memory behind bridge: b8000000-bbffffff [size=64M] [32-bit] Prefetchable memory behind bridge: 88000000-8bffffff [size=64M] [32-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI]) Subsystem: Toshiba Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 4: I/O ports at 1200 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI]) Subsystem: Toshiba Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at 1220 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI]) Subsystem: Toshiba Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 11 Region 4: I/O ports at 1240 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI]) Subsystem: Toshiba Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at 1260 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI]) Subsystem: Toshiba Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [1179:ff10] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 10 Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=32 I/O behind bridge: 6000-7fff [size=8K] [16-bit] Memory behind bridge: b0000000-b7ffffff [size=128M] [32-bit] Prefetchable memory behind bridge: 80000000-87ffffff [size=128M] [32-bit] Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 04) Subsystem: Toshiba Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at e000 [size=256] Region 1: I/O ports at e100 [size=64] Region 2: Memory at d0000000 (32-bit, non-prefetchable) [size=512] Region 3: Memory at d0000200 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: snd_intel8x0 Kernel modules: snd_intel8x0 00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller [8086:266d] (rev 04) (prog-if 00 [Generic]) Subsystem: Toshiba Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller [1179:0001] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 0: I/O ports at e200 [size=256] Region 1: I/O ports at e300 [size=128] Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04) Subsystem: Toshiba Corporation 82801FBM (ICH6M) LPC Interface Bridge [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 80 [ISA Compatibility mode-only controller, supports bus mastering]) Subsystem: Toshiba Corporation 82801FBM (ICH6M) SATA Controller [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 11 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 Region 4: I/O ports at 1100 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_piix 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV370/M22 [Mobility Radeon X300] [1002:5460] (prog-if 00 [VGA controller]) Subsystem: Toshiba Corporation RV370/M22 [Mobility Radeon X300] [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at 90000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at c000 [size=256] Region 2: Memory at c0000000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at 000c0000 [virtual] [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon Kernel modules: radeon 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 15) Subsystem: Toshiba Corporation Marvell 88E8053 Gigabit Ethernet Controller (Inventec) [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at bc000000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at a000 [size=256] Capabilities: <access denied> Kernel driver in use: sky2 Kernel modules: sky2 06:04.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05) Subsystem: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:2741] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 Region 0: Memory at b000b000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel modules: ipw2200 06:06.0 CardBus bridge [0607]: Texas Instruments PCIxx21/PCIxx11/PCIx515 PC Card Controller [104c:8031] Subsystem: Toshiba Corporation PCIxx21/PCIxx11/PCIx515 PC Card Controller [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 255 Region 0: Memory at b4000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 80000000-83ffffff (prefetchable) Memory window 1: 40000000-43ffffff I/O window 0: 00006000-000060ff I/O window 1: 00006400-000064ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite- 16-bit legacy interface ports at 0001 Capabilities: <access denied> 06:06.2 FireWire (IEEE 1394) [0c00]: Texas Instruments OHCI Compliant IEEE 1394 Host Controller [104c:8032] (prog-if 10 [OHCI]) Subsystem: Toshiba Corporation OHCI Compliant IEEE 1394 Host Controller [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (500ns min, 1000ns max), Cache Line Size: 16 bytes Interrupt: pin C routed to IRQ 11 Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at b0004000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 06:06.3 Mass storage controller [0180]: Texas Instruments PCIxx21/PCIxx11 Flash Media Controller [104c:8033] Subsystem: Toshiba Corporation PCIxx21/PCIxx11 Flash Media Controller [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 16 bytes Interrupt: pin D routed to IRQ 5 Region 0: Memory at b0008000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> 06:06.4 SD Host controller [0805]: Texas Instruments PCIxx21/PCIxx11 SD Host Controller [104c:8034] Subsystem: Toshiba Corporation PCIxx21/PCIxx11 SD Host Controller [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at b000a000 (32-bit, non-prefetchable) [size=256] Region 1: Memory at b000a100 (32-bit, non-prefetchable) [size=256] Region 2: Memory at b000a200 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> ** USB devices: Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 12.14 merged-usr: no Architecture: i386 (i686) Kernel: Linux 6.1.188-arch.native (UP) Kernel taint flags: TAINT_WARN Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /bin/dash Init: sysvinit (via /sbin/init) Versions of packages linux-image-6.1.0-53-686 depends on: ii initramfs-tools [linux-initramfs-tool] 0.142+deb12u3 ii kmod 30+20221128-1 ii linux-base 4.12.1~deb12u1 Versions of packages linux-image-6.1.0-53-686 recommends: ii apparmor 3.0.8-3 ii firmware-linux-free 20200122-1 Versions of packages linux-image-6.1.0-53-686 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.06-13+deb12u2 pn linux-doc-6.1 <none> Versions of packages linux-image-6.1.0-53-686 is related to: ii firmware-amd-graphics 20230210-5 pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---On Sat, Sep 26, 2026 at 09:14:10PM +0200, christophe wrote: > CONFIG_MGEODE_LX is a very specific CPU target intended for AMD Geode GX/LX > processors, not a generic i686-compatible processor. Geode was the chosen architecture base for Debian Bookworm. > This choice may result in suboptimal CPU tuning for normal i686 hardware and > does not reflect the intended purpose of the -686 flavour. May? Please be specific what you mean. > Please consider changing the CPU configuration to CONFIG_M686=y or explain the > reason for selecting the Geode LX target in the generic 686 kernel flavour. This is for oldstable, we will not do changes to core configs in this distribution. Bastian -- The more complex the mind, the greater the need for the simplicity of play. -- Kirk, "Shore Leave", stardate 3025.8
--- End Message ---
