I have the same problem. It appeared for the first time when I received a security upgrade of kernel 2.6.32-31 that upgraded it to 2.6.32-34squeeze1. After this upgrade, my wireles doesn't work anymore. Try to revert the upgrade, forcing the package "linux-image-2.6.32-5 ..... " from version 2.6.31-34squeeze1 to version 2.6.32-31. It works for me. BTW I'm looking for a better solution too, since 2.6.32 is an old kernel.
2011/6/6 Anton Ivanov <[email protected]>: > Package: linux-2.6 > Version: 2.6.32-34squeeze1 > Severity: normal > > > The card is identified correctly, but never manages to associate > with an AP. > > The card is a generic rtl8185 cannibalised out of a Maplin HTC > PC bundle. > > Dmesg self-explanatory. > > Unfortunately the web site on sourceforge seems a bit blank so > I cannot pick up a more recent driver to test build to see > if this can be fixed. > > -- Package-specific info: > ** Version: > Linux version 2.6.32-5-686 (Debian 2.6.32-34squeeze1) ([email protected]) (gcc > version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed May 18 07:08:50 UTC 2011 > > ** Command line: > BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 > root=UUID=ddf5a907-47ff-4167-adc8-f00fd59ed1f8 ro acpi_enforce_resources=lax > quiet > > ** Not tainted > > ** Kernel log: > [ 2.646116] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 > (level, low) -> IRQ 21 > [ 2.646134] uhci_hcd 0000:00:10.3: setting latency timer to 64 > [ 2.646141] uhci_hcd 0000:00:10.3: UHCI Host Controller > [ 2.646160] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus > number 5 > [ 2.646199] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000f400 > [ 2.646281] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.646289] usb usb5: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.646295] usb usb5: Product: UHCI Host Controller > [ 2.646300] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd > [ 2.646306] usb usb5: SerialNumber: 0000:00:10.3 > [ 2.646640] usb usb5: configuration #1 chosen from 1 choice > [ 2.647236] hub 5-0:1.0: USB hub found > [ 2.647276] hub 5-0:1.0: 2 ports detected > [ 2.824026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 2.988236] ata2.00: ATA-7: Maxtor 6Y080M0, YAR511W0, max UDMA/100 > [ 2.988245] ata2.00: 156301488 sectors, multi 16: LBA48 > [ 3.004253] ata2.00: configured for UDMA/100 > [ 3.004477] scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y080M0 YAR5 > PQ: 0 ANSI: 5 > [ 3.303701] sd 1:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 > GB/74.5 GiB) > [ 3.303789] sd 1:0:0:0: [sda] Write Protect is off > [ 3.303796] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 3.303832] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 3.304151] sda: sda1 sda2 > [ 3.326469] sd 1:0:0:0: [sda] Attached SCSI disk > [ 3.599716] PM: Starting manual resume from disk > [ 3.599727] PM: Resume from partition 8:1 > [ 3.599732] PM: Checking hibernation image. > [ 3.600083] PM: Error -22 checking image file > [ 3.600087] PM: Resume from disk failed. > [ 3.674961] kjournald starting. Commit interval 5 seconds > [ 3.674984] EXT3-fs: mounted filesystem with ordered data mode. > [ 5.254134] udev[309]: starting version 164 > [ 5.907667] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 5.936574] input: Power Button as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 > [ 5.936593] ACPI: Power Button [PWRB] > [ 5.936735] input: Sleep Button as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 > [ 5.936752] ACPI: Sleep Button [SLPB] > [ 5.936915] input: Power Button as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 > [ 5.936925] ACPI: Power Button [PWRF] > [ 6.076088] processor LNXCPU:00: registered as cooling_device0 > [ 6.113043] input: PC Speaker as /devices/platform/pcspkr/input/input3 > [ 6.197120] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > [ 6.261327] parport_pc 00:0a: reported by Plug and Play ACPI > [ 6.261383] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] > [ 6.458051] cfg80211: Using static regulatory domain info > [ 6.458058] cfg80211: Regulatory domain: US > [ 6.458064] (start_freq - end_freq @ bandwidth), (max_antenna_gain, > max_eirp) > [ 6.458072] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) > [ 6.458079] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > [ 6.458087] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > [ 6.458095] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > [ 6.458102] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > [ 6.458110] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) > [ 6.459361] cfg80211: Calling CRDA for country: US > [ 7.418256] rtl8180 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ > 16 > [ 7.659638] phy0: Selected rate control algorithm 'minstrel' > [ 7.661526] phy0: hwaddr 00:e0:46:50:00:40, RTL8185vD + rtl8225z2 > [ 8.002042] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 > [ 8.002065] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 > (level, low) -> IRQ 22 > [ 8.002248] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 > [ 9.498139] Adding 1959888k swap on /dev/sda1. Priority:-1 extents:1 > across:1959888k > [ 9.763059] EXT3 FS on sda2, internal journal > [ 9.974774] loop: module loaded > [ 10.124184] it87: Found IT8716F chip at 0x290, revision 1 > [ 10.124196] it87: in3 is VCC (+5V) > [ 10.124200] it87: in7 is VCCH (+5V Stand-By) > [ 10.124284] ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI > region IP__ [0x295-0x296] > [ 10.124290] ACPI: This conflict may cause random problems and system > instability > [ 10.124295] ACPI: If an ACPI driver is available for this device, you > should use it instead of the native driver > [ 10.125721] it87 it87.656: Detected broken BIOS defaults, disabling PWM > interface > [ 10.190543] 802.1Q VLAN Support v1.8 Ben Greear <[email protected]> > [ 10.190552] All bugs added by David S. Miller <[email protected]> > [ 11.046888] tun: Universal TUN/TAP device driver, 1.6 > [ 11.046897] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> > [ 11.155830] ADDRCONF(NETDEV_UP): eth2: link is not ready > [ 11.156449] e1000: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: > RX > [ 11.157179] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready > [ 11.586395] RPC: Registered udp transport module. > [ 11.586402] RPC: Registered tcp transport module. > [ 11.586407] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 11.907910] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 11.908402] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: > RX/TX > [ 11.909103] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [ 11.920095] Slow work thread pool: Starting up > [ 11.921507] Slow work thread pool: Ready > [ 11.923832] FS-Cache: Loaded > [ 12.031425] FS-Cache: Netfs 'nfs' registered for caching > [ 12.104331] Installing knfsd (copyright (C) 1996 [email protected]). > [ 12.471713] fuse init (API version 7.13) > [ 13.999504] svc: failed to register lockdv1 RPC service (errno 97). > [ 14.002467] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state > recovery directory > [ 14.020239] NFSD: starting 90-second grace period > [ 21.440013] tap0: no IPv6 routers present > [ 21.504018] eth2: no IPv6 routers present > [ 22.636012] eth0: no IPv6 routers present > [ 662.952668] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 664.112034] wlan0: direct probe to AP 00:90:4c:91:00:03 (try 1) > [ 664.312026] wlan0: direct probe to AP 00:90:4c:91:00:03 (try 2) > [ 664.512019] wlan0: direct probe to AP 00:90:4c:91:00:03 (try 3) > [ 664.712014] wlan0: direct probe to AP 00:90:4c:91:00:03 timed out > > ** Model information > not available > > ** Loaded modules: > Module Size Used by > fuse 44052 1 > nfsd 193055 13 > exportfs 2586 1 nfsd > nfs 206510 0 > lockd 49301 2 nfsd,nfs > fscache 24422 1 nfs > nfs_acl 1695 2 nfsd,nfs > auth_rpcgss 25200 2 nfsd,nfs > sunrpc 134340 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss > tun 8740 2 > 8021q 13950 0 > garp 4066 1 8021q > stp 996 1 garp > it87 11487 0 > hwmon_vid 1528 1 it87 > loop 9729 0 > snd_via82xx 15256 0 > gameport 6025 1 snd_via82xx > snd_ac97_codec 79148 1 snd_via82xx > ac97_bus 710 1 snd_ac97_codec > snd_pcm_oss 28671 0 > snd_mixer_oss 10461 1 snd_pcm_oss > snd_pcm 47226 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss > arc4 974 2 > snd_page_alloc 4977 2 snd_via82xx,snd_pcm > snd_mpu401_uart 4067 1 snd_via82xx > ecb 1405 2 > snd_seq_midi 3576 0 > snd_rawmidi 12513 2 snd_mpu401_uart,snd_seq_midi > rtl8180 22783 0 > snd_seq_midi_event 3684 1 snd_seq_midi > snd_seq 35327 2 snd_seq_midi,snd_seq_midi_event > mac80211 122866 1 rtl8180 > snd_timer 12258 2 snd_pcm,snd_seq > eeprom_93cx6 963 1 rtl8180 > snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq > snd 34387 10 > snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > i2c_viapro 4419 0 > cfg80211 86977 2 rtl8180,mac80211 > parport_pc 15799 0 > psmouse 44777 0 > evdev 5609 6 > shpchp 21220 0 > i2c_core 12751 1 i2c_viapro > parport 22554 1 parport_pc > pcspkr 1207 0 > rfkill 10196 1 cfg80211 > processor 26259 0 > soundcore 3450 1 snd > serio_raw 2916 0 > button 3598 0 > pci_hotplug 18065 1 shpchp > ext3 93944 1 > jbd 31965 1 ext3 > mbcache 3762 1 ext3 > sd_mod 25937 3 > crc_t10dif 1012 1 sd_mod > ata_generic 2067 0 > uhci_hcd 15989 0 > pata_via 5669 0 > sata_via 5576 2 > via_rhine 14527 0 > libata 115513 3 ata_generic,pata_via,sata_via > thermal 9206 0 > ehci_hcd 28453 0 > floppy 40923 0 > mii 2714 1 via_rhine > scsi_mod 104613 2 sd_mod,libata > thermal_sys 9378 2 processor,thermal > usbcore 98541 3 uhci_hcd,ehci_hcd > nls_base 4541 1 usbcore > e1000 77145 0 > > ** Network interface configuration: > # This file describes the network interfaces available on your system > # and how to activate them. For more information, see interfaces(5). > > # The loopback network interface > auto lo > iface lo inet loopback > > # The primary network interface > allow-hotplug eth0 > iface eth0 inet dhcp > > auto tap0 > iface tap0 inet static > address 192.168.250.254 > netmask 255.255.255.0 > tunctl_user uml-net > > auto eth2 > iface eth2 inet static > address 192.168.249.254 > netmask 255.255.255.0 > > ** Network status: > *** IP interfaces and addresses: > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > inet6 ::1/128 scope host > valid_lft forever preferred_lft forever > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP > qlen 100 > link/ether 00:11:0a:5c:7e:56 brd ff:ff:ff:ff:ff:ff > inet 192.168.3.57/24 brd 192.168.3.255 scope global eth0 > inet6 fe80::211:aff:fe5c:7e56/64 scope link > valid_lft forever preferred_lft forever > 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 > link/ether 00:1b:b9:91:7b:63 brd ff:ff:ff:ff:ff:ff > 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP > qlen 100 > link/ether 00:11:0a:5c:7e:57 brd ff:ff:ff:ff:ff:ff > inet 192.168.249.254/24 brd 192.168.249.255 scope global eth2 > inet6 fe80::211:aff:fe5c:7e57/64 scope link > valid_lft forever preferred_lft forever > 5: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state > DOWN qlen 1000 > link/ether 00:e0:46:50:00:40 brd ff:ff:ff:ff:ff:ff > 6: tap0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state > UNKNOWN qlen 500 > link/ether 22:24:61:af:71:6a brd ff:ff:ff:ff:ff:ff > inet 192.168.250.254/24 brd 192.168.250.255 scope global tap0 > inet6 fe80::2024:61ff:feaf:716a/64 scope link > valid_lft forever preferred_lft forever > > *** Device statistics: > Inter-| Receive | Transmit > face |bytes packets errs drop fifo frame compressed multicast|bytes > packets errs drop fifo colls carrier compressed > lo: 8756 104 0 0 0 0 0 0 8756 > 104 0 0 0 0 0 0 > eth0: 344161 1805 0 0 0 0 0 0 234296 > 1032 0 0 0 0 0 0 > eth1: 0 0 0 0 0 0 0 0 0 > 0 0 0 0 0 0 0 > eth2: 4832 36 0 0 0 0 0 0 4860 > 42 0 0 0 0 0 0 > wlan0: 0 0 0 0 0 0 0 0 0 > 0 0 0 0 0 0 0 > tap0: 0 0 0 0 0 0 0 0 230 > 3 0 3 0 0 0 0 > > *** Protocol statistics: > Ip: > 1811 total packets received > 0 forwarded > 0 incoming packets discarded > 1809 incoming packets delivered > 1143 requests sent out > Icmp: > 0 ICMP messages received > 0 input ICMP message failed. > ICMP input histogram: > 0 ICMP messages sent > 0 ICMP messages failed > ICMP output histogram: > Tcp: > 5 active connections openings > 4 passive connection openings > 0 failed connection attempts > 0 connection resets received > 2 connections established > 1563 segments received > 982 segments send out > 0 segments retransmited > 0 bad segments received. > 0 resets sent > Udp: > 170 packets received > 0 packets to unknown port received. > 0 packet receive errors > 161 packets sent > UdpLite: > TcpExt: > 3 TCP sockets finished time wait in fast timer > 9 delayed acks sent > 6 packets directly queued to recvmsg prequeue. > 419 packet headers predicted > 63 acknowledgments not containing data payload received > 730 predicted acknowledgments > IpExt: > InNoRoutes: 2 > InBcastPkts: 85 > InOctets: 325811 > OutOctets: 230648 > InBcastOctets: 16350 > > *** Device features: > eth0: 0x10b89 > eth1: 0x0 > eth2: 0x10b89 > lo: 0x13865 > tap0: 0x0 > wlan0: 0x2000 > > ** PCI devices: > 00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro > Host Bridge [1106:0314] > Subsystem: Elitegroup Computer Systems Device [1019:aa51] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- INTx- > Latency: 8 > Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M] > Capabilities: [80] AGP version 3.5 > Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- > 64bit- FW+ AGP3+ Rate=x4,x8 > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- > Rate=<none> > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: agpgart-via > > 00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro > Host Bridge [1106:1314] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > > 00:00.2 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro > Host Bridge [1106:2314] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > > 00:00.3 Host bridge [0600]: VIA Technologies, Inc. PT890 Host Bridge > [1106:3208] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > > 00:00.4 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro > Host Bridge [1106:4314] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > > 00:00.7 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro > Host Bridge [1106:7314] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > > 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge > [1106:b198] (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: fb000000-fcffffff > Prefetchable memory behind bridge: f4000000-f7ffffff > Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR+ <PERR+ > BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [70] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > > 00:08.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8185 > IEEE 802.11a/b/g Wireless LAN Controller [10ec:8185] (rev 20) > Subsystem: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g > Wireless LAN Controller [10ec:8185] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 32 (8000ns min, 16000ns max), Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: I/O ports at f000 [size=256] > Region 1: Memory at fdfff000 (32-bit, non-prefetchable) [size=512] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0-,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: rtl8180 > > 00:09.0 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit > Ethernet Controller (Copper) [8086:1010] (rev 01) > Subsystem: Compaq Computer Corporation NC7170 Gigabit Server Adapter > [0e11:00db] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 252 (63750ns min), Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 17 > Region 0: Memory at fdfc0000 (64-bit, non-prefetchable) [size=128K] > Region 2: Memory at fdf40000 (64-bit, non-prefetchable) [size=256K] > Region 4: I/O ports at ff00 [size=64] > [virtual] Expansion ROM at 3c000000 [disabled] [size=256K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [e4] PCI-X non-bridge device > Command: DPERE- ERO+ RBC=512 OST=1 > Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=simple > DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- > Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Kernel driver in use: e1000 > > 00:09.1 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit > Ethernet Controller (Copper) [8086:1010] (rev 01) > Subsystem: Compaq Computer Corporation NC7170 Gigabit Server Adapter > [0e11:00db] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 252 (63750ns min), Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 18 > Region 0: Memory at fdfa0000 (64-bit, non-prefetchable) [size=128K] > Region 4: I/O ports at fe00 [size=64] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [e4] PCI-X non-bridge device > Command: DPERE- ERO+ RBC=512 OST=1 > Status: Dev=00:00.1 64bit+ 133MHz+ SCD- USC- DC=simple > DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- > Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Kernel driver in use: e1000 > > 00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VIA VT6420 SATA RAID > Controller [1106:3149] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO]) > Subsystem: Elitegroup Computer Systems Device [1019:aa51] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Interrupt: pin B routed to IRQ 20 > Region 0: I/O ports at fd00 [size=8] > Region 1: I/O ports at fc00 [size=4] > Region 2: I/O ports at fb00 [size=8] > Region 3: I/O ports at fa00 [size=4] > Region 4: I/O ports at f900 [size=16] > Region 5: I/O ports at f200 [size=256] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: sata_via > > 00:0f.1 IDE interface [0101]: VIA Technologies, Inc. > VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) > (prog-if 8a [Master SecP PriP]) > Subsystem: Elitegroup Computer Systems Device [1019:aa51] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Interrupt: pin A routed to IRQ 20 > Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) > [size=8] > Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) > [size=1] > Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) > [size=8] > Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) > [size=1] > Region 4: I/O ports at f800 [size=16] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: pata_via > > 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller [1106:3038] (rev 81) (prog-if 00 [UHCI]) > Subsystem: Elitegroup Computer Systems Device [1019:aa51] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 21 > Region 4: I/O ports at f700 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: uhci_hcd > > 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller [1106:3038] (rev 81) (prog-if 00 [UHCI]) > Subsystem: Elitegroup Computer Systems Device [1019:aa51] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 21 > Region 4: I/O ports at f600 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: uhci_hcd > > 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller [1106:3038] (rev 81) (prog-if 00 [UHCI]) > Subsystem: Elitegroup Computer Systems Device [1019:aa51] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 21 > Region 4: I/O ports at f500 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: uhci_hcd > > 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller [1106:3038] (rev 81) (prog-if 00 [UHCI]) > Subsystem: Elitegroup Computer Systems Device [1019:aa51] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 21 > Region 4: I/O ports at f400 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: uhci_hcd > > 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] > (rev 86) (prog-if 20 [EHCI]) > Subsystem: Elitegroup Computer Systems Device [1019:aa51] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin C routed to IRQ 21 > Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=256] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: ehci_hcd > > 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge > [KT600/K8T800/K8T890 South] [1106:3227] > Subsystem: Elitegroup Computer Systems Device [1019:aa51] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping+ SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > > 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. > VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60) > Subsystem: Elitegroup Computer Systems Device [1019:aa51] > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin C routed to IRQ 22 > Region 0: I/O ports at ee00 [size=256] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: VIA 82xx Audio > > 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] > [1106:3065] (rev 78) > Subsystem: Elitegroup Computer Systems Device [1019:0102] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping+ SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (750ns min, 2000ns max), Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 23 > Region 0: I/O ports at ea00 [size=256] > Region 1: Memory at fdffd000 (32-bit, non-prefetchable) [size=256] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: via-rhine > > 01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. CN700/P4M800 > Pro/P4M800 CE/VN800 [S3 UniChrome Pro] [1106:3344] (rev 01) (prog-if 00 [VGA > controller]) > Subsystem: Elitegroup Computer Systems Device [1019:aa51] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (500ns min) > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M] > Region 1: Memory at fb000000 (32-bit, non-prefetchable) [size=16M] > [virtual] Expansion ROM at fc000000 [disabled] [size=64K] > Capabilities: [60] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [70] AGP version 3.0 > Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- > 64bit- FW- AGP3+ Rate=x4,x8 > Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- > Rate=<none> > > > ** USB devices: > Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > > -- System Information: > Debian Release: 6.0.1 > APT prefers stable-updates > APT policy: (500, 'stable-updates'), (500, 'stable') > Architecture: i386 (i686) > > Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core) > Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/dash > > Versions of packages linux-image-2.6.32-5-686 depends on: > ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management > sy > ii initramfs-tools [linux 0.98.8 tools for generating an initramfs > ii linux-base 2.6.32-34squeeze1 Linux image base package > ii module-init-tools 3.12-1 tools for managing Linux kernel > mo > > Versions of packages linux-image-2.6.32-5-686 recommends: > pn firmware-linux-free <none> (no description available) > ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared > lib > > Versions of packages linux-image-2.6.32-5-686 suggests: > pn grub | lilo <none> (no description available) > pn linux-doc-2.6.32 <none> (no description available) > > Versions of packages linux-image-2.6.32-5-686 is related to: > pn firmware-bnx2 <none> (no description available) > pn firmware-bnx2x <none> (no description available) > pn firmware-ipw2x00 <none> (no description available) > pn firmware-ivtv <none> (no description available) > pn firmware-iwlwifi <none> (no description available) > pn firmware-linux <none> (no description available) > pn firmware-linux-nonfree <none> (no description available) > pn firmware-qlogic <none> (no description available) > pn firmware-ralink <none> (no description available) > pn xen-hypervisor <none> (no description available) > > -- debconf information excluded > > > > -- > To UNSUBSCRIBE, email to [email protected] > with a subject of "unsubscribe". Trouble? Contact [email protected] > Archive: > http://lists.debian.org/[email protected] > > -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
