Hello all, I am a unix admin of about 4 years doing mostly Solaris, AIX, and RH based linux distributions (and a little OpenBSD). In an effort to diversify my platfom base, I decided to install Debian. Not one to do things the easy way, I decided to install this on my laptop! =)
I downloaded the pieces and built the 2.2r2 iso disk1. I was able to boot and install the os. It auto detected my Xircom CardBus Ethernet 100 + Modem 56 (Ethernet Interface) but then when I stepped through the ip configuration it failed. I also have a port replicator that I primarily use. It has a 3com 3c920 which is suppossed to be compatable with 3c905C-TX, which I should be able to use the 3c90X driver. I tried to do a insmod and it could not find it. I also could not get the X system to install correctly. Apparently the card is an ATI Mobility M1 which I should use a Mach64 driver for. However, I am used to running Xconfigurator, which I believe is a RedHat util. But, I think that I am going to try and get X 4.02 running instead of the version that comes with D2.2r2. Any help out there?? Thanks!! Jeremy
