On Fri, Dec 22, 2000 at 10:43:30AM -0600, Jeremy Finke wrote: > Hello all, > > I am a unix admin of about 4 years doing mostly Solaris, AIX, and RH based > linux distributions (and a little OpenBSD). In an effort to diversify my > platfom base, I decided to install Debian. Not one to do things the easy > way, I decided to install this on my laptop! =) > > I downloaded the pieces and built the 2.2r2 iso disk1. I was able to boot > and install the os. It auto detected my Xircom CardBus Ethernet 100 + Modem > 56 (Ethernet Interface) but then when I stepped through the ip configuration > it failed. I also have a port replicator that I primarily use. It has a > 3com 3c920 which is suppossed to be compatable with 3c905C-TX, which I > should be able to use the 3c90X driver. I tried to do a insmod and it could > not find it. > > I also could not get the X system to install correctly. Apparently the card > is an ATI Mobility M1 which I should use a Mach64 driver for. However, I am > used to running Xconfigurator, which I believe is a RedHat util. But, I > think that I am going to try and get X 4.02 running instead of the version > that comes with D2.2r2. > > Any help out there?? > > Thanks!! > > Jeremy
I've got a CPx that has been upgraded to debian 2.2r2. The xf86setup package contains XF86Setup and xf86setup tools. I think I used XF86Setup to create the XF86Config file and I think it depends on xserver-vga16. -- Lee Bradshaw [EMAIL PROTECTED] Texas Instruments [EMAIL PROTECTED]
