Card Services (pcmcia-cs) changed between Woody (3.1.33-6) and sid (3.2.2-1). You need pcmcia-cs from sid in order to use 2.4.20.
Unfortunately pcmcia-cs-3.2.2-1 depends on the infamous libc6 and some other stuff from sid you may not want to install right now. I was faced with the same choice, and decided to stay with 2.4.18 and pcmcia-cs 3.1.33-6. Kevin On 13 Feb 2003 04:21:55 +0100 Florian Reichert <[EMAIL PROTECTED]> wrote: > Werner Heuser <[EMAIL PROTECTED]> writes: > > > > Thats what I am actually trying! But I never had success bulding a > > > 2.4 Kernel without pcmcia and the pcmcia-cs. I allways missed > > > something so that something didn't work. But I am going to give it a > > > try ... Will report success here... > > > > There are two completely different approaches for PCMCIA-CS support > > in the 2.4 series and they are mutually exclusive, see README-2.4 > > in the PCMCIA-CS package. Try to start by _disabling_ any > > PCMCIA support in the Kernel and leave it to the PCMCIA package > > itself, `make config' for this package will make the right > > decision for you. If really doesn't work, enable support in > > the Kernel and don't forget to change the driver in > > /etc/default/pcmcia.conf then. > > Sorry that took a while but half a liter beer knocked out my Notebook > for one week ... know it is back working properly! > > But the PCMCIA Adapter for my CF Card still doesn't work! > > I compiled a new Kernel (2.4.20) without pcmcia support. Then I > compiled the pcmcia sources from the woody Distribution (used > make-kpg) before installing the debs i removed the pcmcia packages and > the /etc/pcmcia directory ... But the error is still the same ... > > cs: unable to map card memory! > cs: unable to map .... > > cardctl ident no product info available .... > > BTW know the D-Link Cardbus Nic doesn't work too .... > > Ok I will try to remove the pcmcia packages again an compile thhe > newest Version of pcmcia-cs from sourceforg. > > Any other Hints here? > > Thanks for help? > > Florian > > > -- > Florian Reichert > Please notice: e-mails to my adress [EMAIL PROTECTED] must not be larger > than 5 k, because they will be filtered else. If you would like to send > anny larger e-mail to me pleas ask for alternative Contact! > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] >
