Hi I had a perfect working Sarge installation and decided to upgrade to Etch. My laptop is a Asus M6Ne running a custom 2.6.11.10 patched to improve my synaptics touchpad. After the upgrade i couldn't get XOrg to start, but after googling around i reinstalled hotplug instead of udev. To be honest i don't know the difference, but the core-pointer error stopped. Unfortunately i still have two major problems.
1) Wifi I'm using the ngolde script, http://ngolde.de/laptop.html, to start my wifi. If you have a working ipw2200 WIFI-nic on Etch. I would like to know how, kernel and driver version. The error is: Error for wireless request "Set ESSID" (8B1A) : SET failed on device eth1 ; No such device. Error for wireless request "Set Frequency" (8B04) : SET failed on device eth1 ; No such device. DMesg: ipw2200: ipw-2.2-boot.fw load failed: Reason -2 ipw2200: Unable to load firmware: 0xFFFFFFFE ipw2200: failed to register network device ipw2200: probe of 0000:02:02.0 failed with error -5 2) usbmouse My plain 3 button Logitech mouse isn't working. All usb-modules and mouse modules are built into the kernel. If I cat /dev/psaux or /dev/input/mouse1, i get an output when moving the mouse. But when the device is writing into xorg.conf, there is still no response in X. Section "InputDevice" Identifier "usbMouse" Driver "mouse" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" Option "ZAxisMapping" "4 5" Option "Device" "/dev/input/mice" Option "Buttons" "5" EndSection Thank you in advance... Best Regards /Lars -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
