Le mardi 03 mai 2005 � 00:49 +0200, Thiemo Seufer a �crit : > Jean-Yves Leblin wrote: > [snip] > > tip32: IP32 Linux tftpboot loader 0.3.8.6 > > Loading program segment 1 at 0x80004000, size = 0xZeroing memory at > > 0x80454086, > > size = 0x3cf9a > > Starting kernel; entry point = 0x80419000 > > Copied initrd from 0x8185c890 to 0x80492000 (0x1a89aa bytes) > > > > and then hangs >
Thanks a lot for your answer > It probably doesn't hang but listens on the serial console instead of > the graphical one, or vice versa. Make sure the "console" firmware > variable points to the correct device, or override the firmware setting, > e.g. from serial to graphical console via > > bootp():o2-boot.img append="console=tty0" > well it's not better, but i've probably found the reason (which is probably that i'm stupid ...) : the whole boot process works perfectly with this image (and only this one): http://www.linux-mips.org/~glaurung/O2/linux-2.5.4/kernel/vmlinux-r10k (i've got a kernel panic because of a root= pb but that's not the problem right now ...), but this image has been made for R10000 which probably meens that i have an R10000 and it seems that the method described here : http://www.cyrius.com/debian/o2/ only works with R5000 R5200 and R7000. In fact I've just checked and I HAVE a R10000 (i should have started with this ...) Is there an existing image to install debian with this method on R10000 ? (R10000 seem not to be well supported ...) thanks for all (and sorry for my mistakes) JY -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
