Thanks a lot, but it still doesn't work for me.
First I tried normal installation using the new files dated 2004/07/14.
I found the first terminal screen scrambled ("choose language" etc.), but
moving the cursor up and down makes the options readable. The following
screens are fine. But the partitioner problem persists.
Of course I don't want to wait until SSH support is implemented, so I tried
to mount the partitions by hand as described.
I added the kernel parameter DEBCONF_PRIORITY=low and selected
"Execute a shell" before "Partition disks".
I entered all the lines without problems:mkswap /dev/ide/host0/bus0/target0/lun0/part2 swapon /dev/ide/host0/bus0/target0/lun0/part2 mkdir -p /target mkfs.ext3 /dev/ide/host0/bus0/target0/lun0/part3 mount /dev/ide/host0/bus0/target0/lun0/part3 /target mkdir -p /target/boot mkfs.ext2 -r 0 /dev/ide/host0/bus0/target0/lun0/part1 mount /dev/ide/host0/bus0/target0/lun0/part1 /target/boot mkdir -p /target/home mkfs.ext3 /dev/ide/host0/bus0/target0/lun0/part4 mount /dev/ide/host0/bus0/target0/lun0/part4 /target/home exit After that I continued installation with "Install base system". But the mount points are not recognized, the partitioner starts up and just offers the same procedure as already known. What's wrong? Thanks! -- Pepillo
