On Wed, Mar 19, 2008 at 02:47:24PM +0100, Martin Michlmayr wrote: > * Nick Schmalenberger <[EMAIL PROTECTED]> [2008-03-19 04:14]: > > tip22: IP22 Linux tftpboot loader 0.3.10 > > Loading program segment 1 at 0x88004000, size = 0x0 45c086 > > Zeroing memory at 0x88460086, size = 0x3f40a > > Kernel entry point is 0x8840a000 > > Copying initrd from 0x89e3e5d0 to 0x88800000 (0x3e1adb bytes)... > > Initrd copied. > > Starting kernel... > > > > It then sits there for as long as I leave it. I installed etch by the > > same method, so this should work. Is there anything else I can try? > > What does printenv say? Command Monitor. Type "exit" to return to the menu. >> setenv srvaddr 192.168.3.15 >> printenv SystemPartition=scsi(0)disk(2)rdisk(0)partition(8) OSLoadPartition=scsi(0)disk(2)rdisk(0)partition(0) OSLoader=arcboot OSLoadFilename=Linux AutoLoad=Yes TimeZone=PST8PDT console=g diskless=0 dbaud=9600 volume=80 sgilogo=y autopower=y netaddr=192.168.3.26 eaddr=08:00:69:07:b1:c9 cpufreq=250 NoAutoLoad=CONSOLE OPEN FAILED. ConsoleOut=serial(0) ConsoleIn=serial(0) srvaddr=192.168.3.15 >> boot -f bootp():/netboot-boot.img Obtaining /netboot-boot.img from server 192.168.3.15 7680+11649712 ... tip22: IP22 Linux tftpboot loader 0.3.10 Loading program segment 1 at 0x88004000, size = 0x0 45c086 Zeroing memory at 0x88460086, size = 0x3f40a Kernel entry point is 0x8840a000 Copying initrd from 0x89e3e5d0 to 0x88800000 (0x3e1adb bytes)... Initrd copied. Starting kernel...
The tftp server is tftpd-hpa with the command line /usr/sbin/in.tftpd /usr/sbin/in.tftpd -s /var/lib/tftpboot -R 4096:32767 run from openbsd-inetd and it works well with the etch netboot-boot.img, again with all the same prom settings. Thanks for all help. Nick Schmalenberger -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
