I have a minimal installation of Lenny that I could send you, or you could download from me. All you would have to do is connect the drive to a different computer and extract the file.
-Chris On Thu, Oct 21, 2010 at 2:48 AM, <[email protected]> wrote: > Hi, > > How much memory does this Qube have? > I also had a lot of trouble installing Debian on an of the shelf Qube 2. I > found this procedure: http://www.cyrius.com/debian/cobalt/unpack.html very > helpfull to be able to install Debian on my unit (mine only had 16 MB RAM). > You really should consider setting up a serial connection with the box (even > if you decide to use the SSH installer), so you know what is going on. > > > regards, > > Kenneth > > P.S. you can find my story and findings on my Qube here: > http://kennywest.blogspot.com/2010/02/story-of-cobalt-qube.html > > > > ----- Original Message ----- > From: "Marko Hilse" <[email protected]> > To: [email protected] > Sent: Wednesday, October 20, 2010 8:26:56 PM GMT +01:00 Amsterdam / Berlin / > Bern / Rome / Stockholm / Vienna > Subject: "unit boot failed" by installing Debian on Qube2 > > Hi *, > > I´m trying to install Debian an Qube2. > > I successfully installed an DHCP- and NFS-Server on my Ubuntu and start the > net booting on the Qube2. The Qube2 gets The IP from the DHCP and asked if I > want to use terminal or SSH. I don't have an serial connector on my notebook > so that I have to choose SSH. After the display says "Starting the installer > (SSH)" I got an "Unit Boot Failed". I tried also Serial with the same > result. > > Does anybody have an idea? > > Thanks > > Marko > > I tried the following HowTo: > http://www.cyrius.com/debian/cobalt/install.html > -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
