Please note you can also download a base Debian 4.0 install as described here: http://www.cyrius.com/debian/cobalt/unpack.html
After that you can safely dist-upgrade towards Lenny. ----- Original Message ----- From: "Marko Hilse" <[email protected]> To: [email protected] Cc: [email protected] Sent: Thursday, October 21, 2010 3:00:43 PM GMT +01:00 Amsterdam / Berlin / Bern / Rome / Stockholm / Vienna Subject: Re: "unit boot failed" by installing Debian on Qube2 Hi Chris, this would be nice. Where can I download your installation? Thx Marko Am 21.10.2010 14:46, schrieb Chris Thomas: > I have a minimal installation of Lenny that I could send you, or you > could download from me. All you would have to do is connect the drive > to a different computer and extract the file. > > -Chris > > > On Thu, Oct 21, 2010 at 2:48 AM,<[email protected]> wrote: >> Hi, >> >> How much memory does this Qube have? >> I also had a lot of trouble installing Debian on an of the shelf Qube 2. I >> found this procedure: http://www.cyrius.com/debian/cobalt/unpack.html very >> helpfull to be able to install Debian on my unit (mine only had 16 MB RAM). >> You really should consider setting up a serial connection with the box (even >> if you decide to use the SSH installer), so you know what is going on. >> >> >> regards, >> >> Kenneth >> >> P.S. you can find my story and findings on my Qube here: >> http://kennywest.blogspot.com/2010/02/story-of-cobalt-qube.html >> >> >> >> ----- Original Message ----- >> From: "Marko Hilse"<[email protected]> >> To: [email protected] >> Sent: Wednesday, October 20, 2010 8:26:56 PM GMT +01:00 Amsterdam / Berlin / >> Bern / Rome / Stockholm / Vienna >> Subject: "unit boot failed" by installing Debian on Qube2 >> >> Hi *, >> >> I´m trying to install Debian an Qube2. >> >> I successfully installed an DHCP- and NFS-Server on my Ubuntu and start the >> net booting on the Qube2. The Qube2 gets The IP from the DHCP and asked if I >> want to use terminal or SSH. I don't have an serial connector on my notebook >> so that I have to choose SSH. After the display says "Starting the installer >> (SSH)" I got an "Unit Boot Failed". I tried also Serial with the same >> result. >> >> Does anybody have an idea? >> >> Thanks >> >> Marko >> >> I tried the following HowTo: >> http://www.cyrius.com/debian/cobalt/install.html >> > > -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected] -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/12625510.161287669592484.javamail.javamailu...@localhost
