* [email protected] ([email protected]) [130626 02:47]: > I see that your PMON is *not* from lemote, and I think this is the root > cause of boot failure. Please use this one, thanks. > http://dev.lemote.com/files/upload/lm/kernel/testing/pmon-A1004-2.1.3.bin
Booting this ends up with: SuperIO RTC Pull up GPIO15. NODE 0 MEMORY CONFIG BEGIN Probing DDR SLOT: 00000000 Set DDR frequency by software Enable register space of MEMORY DDR Interleave space open : 0x00000000 - 0x0FFFFFFF DDR Interleave using Bit 13 DDR Interleave space open : 0x1_1000_0000 - 0x1_FFFF_FFFF DDR Interleave using Bit 13 Disable register space of MEMORY Disable cpu buffered read and stops there. Doesn't seem to be entirly right to me then. (whereas the output of the other one continues with SuperIO RTC spd_info_store begain. spd_info_store done. Copy PMON to execute location... start = 0x81000000 s0 = 0x3ec00000 81080000 copy text section done. Copy PMON to execute location done. sp=80ffc000 Uncompressing Bios....................................................................OK,Booting Bios memsz 2032 FREQ RTC: 13-07-24 20:10:07 FREI cpu fre 900000000 DONE DEVI init uhci cmd called ENVI MAPV in envinit ) Any hints for me? Regards, Andi -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
