Hi, Qian and Chen Please see see, Andreas use http://dev.lemote.com/files/upload/lm/kernel /testing/pmon-A1004-2.1.3.bin on A1004 notebook but have boot failure.
> * [email protected] ([email protected]) [130626 02:47]: >> I see that your PMON is *not* from lemote, and I think this is the root >> cause of boot failure. Please use this one, thanks. >> http://dev.lemote.com/files/upload/lm/kernel/testing/pmon-A1004-2.1.3.bin > > > Booting this ends up with: > SuperIO RTC > Pull up GPIO15. > NODE 0 MEMORY CONFIG BEGIN > > Probing DDR SLOT: 00000000 > > Set DDR frequency by software > > Enable register space of MEMORY > DDR Interleave space open : 0x00000000 - 0x0FFFFFFF > DDR Interleave using Bit 13 > DDR Interleave space open : 0x1_1000_0000 - 0x1_FFFF_FFFF > DDR Interleave using Bit 13 > Disable register space of MEMORY > Disable cpu buffered read > > and stops there. Doesn't seem to be entirly right to me then. > > (whereas the output of the other one continues with > SuperIO RTC > > spd_info_store begain. > > spd_info_store done. > Copy PMON to execute location... > start = 0x81000000 > s0 = 0x3ec00000 > 81080000 > copy text section done. > Copy PMON to execute location done. > sp=80ffc000 > Uncompressing > Bios....................................................................OK,Booting > Bios > memsz 2032 > FREQ > RTC: 13-07-24 20:10:07 > FREI > cpu fre 900000000 > DONE > DEVI > init uhci cmd called > ENVI > MAPV > in envinit > ) > > > Any hints for me? > > > > Regards, > Andi > -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
