Hi all, I'm tring to compiling a kernel for my double processor 8500 PowerMac.
I have activaded the regular options in the kernel config but during the boot only the Processor 0 was starting up. below some log and info about my machine and system. Someone can help me? Tnx MaX -------------- My machine: [EMAIL PROTECTED]:~$ cat /proc/cpuinfo processor : 0 cpu : 604e clock : 200MHz revision : 2.4 (pvr 0009 0204) bogomips : 398.95 total bogomips : 398.95 machine : Power Macintosh motherboard : AAPL,8500 MacRISC L2 cache : 256K unified memory : 112MB pmac-generation : OldWorld [EMAIL PROTECTED]:~$ ---------- the dmesg [EMAIL PROTECTED]:~$ dmesg | more Memory BAT mapping: BAT2=64Mb, BAT3=32Mb, residual: 16Mb Warning, memory limited to 96 Mb, use CONFIG_HIGHMEM to reach 96 Mb Total memory = 96MB; using 512kB for hash table (at c0380000) Linux version 2.4.18 ([EMAIL PROTECTED]) (gcc version 3.1.1 20020606 (Debian prerelease)) #3 SMP Mon Jun 10 13:55:36 CEST 2002 Found a Grand Central mac-io controller, rev: 2, mapped at 0xfdcff000 PowerMac motherboard: PowerMac 8500/8600 Cache coherency enabled for bandit/PSX at 00000000 Found Bandit PCI host bridge at 0xf2000000. Firmware bus number: 0->0 Found Chaos PCI host bridge at 0xf0000000. Firmware bus number: 1->1 On node 0 totalpages: 24576 zone(0): 24576 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/sda8 keyboard_sends_linux_keycodes=1 video=ofonlySystem has 32 possible interrupts GMT Delta read from XPRAM: 60 minutes, DST: off via_calibrate_decr: ticks per jiffy = 124999 (749999 ticks) Console: colour dummy device 80x25 Calibrating delay loop... 398.95 BogoMIPS Memory: 92744k available (1996k kernel code, 1084k data, 292k init, 0k highmem) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) POSIX conformance testing by UNIFIX Entering SMP Mode... Processor 1 is stuck. Waiting on wait_init_idle (map = 0x0) All processors have done init_idle PCI: Probing PCI hardware PCI:00:10.0: Resource 0: f3000000-f301ffff (f=200) PCI:00:0e.0: Resource 0: 00000400-000004ff (f=101) PCI:00:0e.0: Resource 1: 80800000-808000ff (f=200) PCI:00:0f.0: Resource 0: 80801000-80801fff (f=200) PCI:01:0b.0: Resource 1: 90000000-9000ffff (f=200) PCI:01:0b.0: Resource 2: 94000000-97ffffff (f=200) PCI:01:0d.0: Resource 0: 90000000-900003ff (f=200) PCI: Cannot allocate resource region 0 of device 01:0d.0 PCI: parent is c0367068: 90000000-9fffffff (f=200) Macintosh CUDA driver v0.5 for Unified ADB. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Thermal assist unit not available Starting kswapd Journalled Block Device driver loaded devfs: v1.10 (20020120) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 i2c-core.o: i2c core module MacOS display is /chaos/control Using unsupported 832x624 control at 94c00210, depth=32, pitch=3360 Console: switching to colour frame buffer device 104x39 fb0: Open Firmware frame buffer device on /chaos/control input0: Macintosh mouse button emulation pty: 256 Unix98 ptys configured block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 0.97.sv fd0: SWIM3 floppy controller loop: loaded (max 8 devices) eth0: MACE at 00:05:02:ac:d5:71, chip revision 25.64 PPP generic driver version 2.4.1 -------- first lines of kernel config (2.4.18 + PPC patch) compiled under debian sid with gcc 3.1 [EMAIL PROTECTED]:~$ more /usr/src/linux/.config # # Automatically generated make config: don't edit # # CONFIG_UID16 is not set # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_HAVE_DEC_LOCK=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y # # Platform support # CONFIG_PPC=y CONFIG_PPC32=y CONFIG_6xx=y # CONFIG_4xx is not set # CONFIG_POWER3 is not set # CONFIG_POWER4 is not set # CONFIG_8xx is not set # CONFIG_8260 is not set CONFIG_PPC_STD_MMU=y CONFIG_ALL_PPC=y # CONFIG_APUS is not set # CONFIG_GEMINI is not set CONFIG_SMP=y # CONFIG_IRQ_ALL_CPUS is not set CONFIG_ALTIVEC=y CONFIG_TAU=y # CONFIG_TAU_INT is not set # CONFIG_TAU_AVERAGE is not set # # General setup # # CONFIG_HIGHMEM is not set # CONFIG_ISA is not set # CONFIG_EISA is not set # CONFIG_SBUS is not set # CONFIG_MCA is not set CONFIG_PCI=y CONFIG_NET=y CONFIG_SYSCTL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_KCORE_ELF=y CONFIG_BINFMT_ELF=y CONFIG_KERNEL_ELF=y CONFIG_BINFMT_MISC=m CONFIG_PCI_NAMES=y CONFIG_HOTPLUG=y -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
