i was under the impression that there was no dual-processor 8500, that it was only the 9*00's that had the dual-processor option. unless this is an after market upgrade...
/*C*/ On 10 Jun 2002, MaX wrote: > Date: 10 Jun 2002 21:11:53 +0200 > From: MaX <[EMAIL PROTECTED]> > To: [email protected] > Subject: Double Processor: Processor 1 is stuck??? > Resent-Date: Mon, 10 Jun 2002 15:12:37 -0400 (EDT) > Resent-From: [email protected] > > Hi all, > I'm tring to compiling a kernel for my double processor 8500 PowerMac. > > I have activaded the regular options in the kernel config but during the > boot only the Processor 0 was starting up. > > below some log and info about my machine and system. > Someone can help me? > > Tnx > MaX > > -------------- > My machine: > > [EMAIL PROTECTED]:~$ cat /proc/cpuinfo > processor : 0 > cpu : 604e > clock : 200MHz > revision : 2.4 (pvr 0009 0204) > bogomips : 398.95 > > total bogomips : 398.95 > machine : Power Macintosh > motherboard : AAPL,8500 MacRISC > L2 cache : 256K unified > memory : 112MB > pmac-generation : OldWorld > [EMAIL PROTECTED]:~$ > > ---------- > > the dmesg > > > [EMAIL PROTECTED]:~$ dmesg | more > Memory BAT mapping: BAT2=64Mb, BAT3=32Mb, residual: 16Mb > Warning, memory limited to 96 Mb, use CONFIG_HIGHMEM to reach 96 Mb > Total memory = 96MB; using 512kB for hash table (at c0380000) > Linux version 2.4.18 ([EMAIL PROTECTED]) (gcc version 3.1.1 20020606 > (Debian prerelease)) #3 SMP Mon Jun 10 13:55:36 CEST 2002 > Found a Grand Central mac-io controller, rev: 2, mapped at 0xfdcff000 > PowerMac motherboard: PowerMac 8500/8600 > Cache coherency enabled for bandit/PSX at 00000000 > Found Bandit PCI host bridge at 0xf2000000. Firmware bus number: 0->0 > Found Chaos PCI host bridge at 0xf0000000. Firmware bus number: 1->1 > On node 0 totalpages: 24576 > zone(0): 24576 pages. > zone(1): 0 pages. > zone(2): 0 pages. > Kernel command line: root=/dev/sda8 keyboard_sends_linux_keycodes=1 > video=ofonlySystem has 32 possible interrupts > GMT Delta read from XPRAM: 60 minutes, DST: off > via_calibrate_decr: ticks per jiffy = 124999 (749999 ticks) > Console: colour dummy device 80x25 > Calibrating delay loop... 398.95 BogoMIPS > Memory: 92744k available (1996k kernel code, 1084k data, 292k init, 0k > highmem) > Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) > > Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) > Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) > Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) > Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) > Page-cache hash table entries: 32768 (order: 5, 131072 bytes) > POSIX conformance testing by UNIFIX > Entering SMP Mode... > Processor 1 is stuck. > Waiting on wait_init_idle (map = 0x0) > All processors have done init_idle > PCI: Probing PCI hardware > PCI:00:10.0: Resource 0: f3000000-f301ffff (f=200) > PCI:00:0e.0: Resource 0: 00000400-000004ff (f=101) > PCI:00:0e.0: Resource 1: 80800000-808000ff (f=200) > PCI:00:0f.0: Resource 0: 80801000-80801fff (f=200) > PCI:01:0b.0: Resource 1: 90000000-9000ffff (f=200) > PCI:01:0b.0: Resource 2: 94000000-97ffffff (f=200) > PCI:01:0d.0: Resource 0: 90000000-900003ff (f=200) > PCI: Cannot allocate resource region 0 of device 01:0d.0 > PCI: parent is c0367068: 90000000-9fffffff (f=200) > Macintosh CUDA driver v0.5 for Unified ADB. > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > Thermal assist unit not available > Starting kswapd > Journalled Block Device driver loaded > devfs: v1.10 (20020120) Richard Gooch ([EMAIL PROTECTED]) > devfs: boot_options: 0x0 > i2c-core.o: i2c core module > MacOS display is /chaos/control > Using unsupported 832x624 control at 94c00210, depth=32, pitch=3360 > Console: switching to colour frame buffer device 104x39 > fb0: Open Firmware frame buffer device on /chaos/control > input0: Macintosh mouse button emulation > pty: 256 Unix98 ptys configured > block: 128 slots per queue, batch=32 > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > Uniform Multi-Platform E-IDE driver Revision: 6.31 > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > ide-floppy driver 0.97.sv > fd0: SWIM3 floppy controller > loop: loaded (max 8 devices) > eth0: MACE at 00:05:02:ac:d5:71, chip revision 25.64 > PPP generic driver version 2.4.1 > > > -------- > > first lines of kernel config (2.4.18 + PPC patch) compiled under debian > sid with gcc 3.1 > > > [EMAIL PROTECTED]:~$ more /usr/src/linux/.config > # > # Automatically generated make config: don't edit > # > # CONFIG_UID16 is not set > # CONFIG_RWSEM_GENERIC_SPINLOCK is not set > CONFIG_RWSEM_XCHGADD_ALGORITHM=y > CONFIG_HAVE_DEC_LOCK=y > > # > # Code maturity level options > # > CONFIG_EXPERIMENTAL=y > > # > # Loadable module support > # > CONFIG_MODULES=y > CONFIG_MODVERSIONS=y > CONFIG_KMOD=y > > # > # Platform support > # > CONFIG_PPC=y > CONFIG_PPC32=y > CONFIG_6xx=y > # CONFIG_4xx is not set > # CONFIG_POWER3 is not set > # CONFIG_POWER4 is not set > # CONFIG_8xx is not set > # CONFIG_8260 is not set > CONFIG_PPC_STD_MMU=y > CONFIG_ALL_PPC=y > # CONFIG_APUS is not set > # CONFIG_GEMINI is not set > CONFIG_SMP=y > # CONFIG_IRQ_ALL_CPUS is not set > CONFIG_ALTIVEC=y > CONFIG_TAU=y > # CONFIG_TAU_INT is not set > # CONFIG_TAU_AVERAGE is not set > > # > # General setup > # > # CONFIG_HIGHMEM is not set > # CONFIG_ISA is not set > # CONFIG_EISA is not set > # CONFIG_SBUS is not set > # CONFIG_MCA is not set > CONFIG_PCI=y > CONFIG_NET=y > CONFIG_SYSCTL=y > CONFIG_SYSVIPC=y > CONFIG_BSD_PROCESS_ACCT=y > CONFIG_KCORE_ELF=y > CONFIG_BINFMT_ELF=y > CONFIG_KERNEL_ELF=y > CONFIG_BINFMT_MISC=m > CONFIG_PCI_NAMES=y > CONFIG_HOTPLUG=y > > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
