Krisztian Mark Szentes said: > I try to use the rescue image: > > 0 > boot floppy:\linux.bin load_ramdisk=1 root=/dev/ram video=keep > chrpboot starting: loaded at 0x400000 > avail_ram = 4e5000 > gunzipping (0x10000 <- 0x415cb8:0x4e3194)...done > 1934704 > bytes > start address = 0x10000 > instantiating rtas...rtas at 00565000 > done > copying OF device tree...done > booting... > > the LCD blanks out and nothing happens any more. Not even the reset > button reboots the B50. > I access the machine over the serial console as there is no video card > installed. I guess the video=keep would tell the kernel not to change to > the (nonexistent) video framebuffer. > > What's wrong with the kernel? Should I compile one with just serial > support and the correct command line (ramdisk etc.)
I'm not 100% sure if this is required but perhaps you could try adding the "console=ttyS0" (assuming you are using tty1) parameter to the boot command line. Cheers, Leigh.
