I got it: adding a "chandev"-parameter to the parmfile on the cms-disk
00000 * * * Top of File * * * 00001 dasd=autodetect ramdisk_size=8196 root=/dev/ram0 ro 00002 chandev=ctc0,0x1400,0x1401 00003 * * * End of File * * * ipl 00c #depmod -a #modprobe ctc #ifconfig ctc0 <whateveryoulike...> now I'll try 3.0.15 ;-) simon On Thursday 18 October 2001 14:00, Simon Fischer wrote: > [...] > Which network configuration dialog do you mean ;-) ? Where can I find it? > - I tried it from scratch: > > I started with insmod ctc -> it failed of course > after depmod -a I tried it each time with modprobe and insmod (with and > without complete path to the module): > > When I simply use modprobe ctc the module loads fine but an > > ifconfig ctc0 192.168.253.20 pointopoint 192.168.253.19 mtu 1492 up > > ( I first tried it with an mtu-size of 1492 because the ctc-driver used to > be unstable with other values) > > gives: > > SIOCSIFADDR: No such device > ctc0: unknown interface: No such device > SIOCSIFDSTADDR: No such device > ctc0: unknown interface: No such device > SIOCSIFMTU: No such device > ctc0: unknown interface: No such device > > so I tried it with several config-options: > > insmod ctc > setup='"ctc,0x1400,0x1401,ctc0"' > ctc='"ctc0,0x1400"' > ctc=ctc0:0x1400 > ... > everything failed to load > only insmod ctc ctc0:0x1400 worked but with the same result of "ifconig" as > above. > > > #CP Q CTC shows: > CTCA 1400 COUPLED TO TCPIP 1301 SUBCHANNEL = 000E > CTCA 1401 COUPLED TO TCPIP 1300 SUBCHANNEL = 000F > > It's not so important anymore because I got a new connection through our > firewall but I'm very interested in testing the 3.0.15 version. > > thanks > > simon -- simon fischer linux for zSeries (s/390) - team becom informationssysteme gmbh - germany
