Thanks all for your answers. I did a try and err-search ;) and finally got it working. I copied the /boot/vmlinuz-2.2.17-sun4cdm to /boot/vmlinuz, rmed the /vmlinuz-symlink and copied it also to this location. And used image=2/vmlinuz (/dev/sda1 is /boot, sda2 is /) and it worked... I still have to play a little, but I think Leo's way is the right one.
+-Leonardo Rochael Almeida-([EMAIL PROTECTED])-[25.08.00 23:05]: > > Put your /boot under 1GB and put everything needed to boot all your OSes > inside /boot, including all boot sectors from other OSes AND silo.conf > (put a symlink /etc/silo.conf -> /boot/silo.conf). The reason is that silo > reads its conf file at runtime (meaning that you don't need to re-run silo > when you change silo.conf, but also meaning you must keep it under 1GB, > hence the need to put it under /boot). > > After you do that, don't point silo.conf to a symlink to the kernel, but > to the kernel proper, so that you don't confuse silo (maybe a symlink to > the kernel works if both are on the same partition and it's a relative > symlink, but I haven't tried that). > > so if your /boot is sdX and your kernel is in /boot/vmlinux-2.2.17, > put image=X/vmlinux-2.2.17
