[Ben Collins asked that I repost this message to debian-sparc. I've been deliquent about subscribing, so it's a good time to do both. :-)]
After quite a few aborted attempts, I finally got Linux running on my SunBlade 100. Here's a brief outline of what worked. Miles to Go ----------- The SunBlade 100 -- a fairly cool, sub-$1K SPARC-based machine available from Sun Microsystem's web site -- is a semi-odd machine, so odd, in fact, that it wasn't until April 2001 that Sun released a version of Solaris 8 that would run on it unpatched. Needless to say, it was going to take a fairly bleeding-edge distribution to get this thing running Linux. I'm most familiar with Red Hat, but RH is no longer developing for the SPARC, and its older releases wouldn't work with this hardware. SuSE recently trumpeted its support for SPARC hardware, so I tried booting its 7.1 version. Only later did I read that the UltraSPARC IIe is explicitly *not* supported (yet). Sigh. I did all the logical Google searches, only to be rewarded with various postings like "I can't get Linux to boot on my SunBlade. Anybody had better luck?" Finally, I got word that someone had successfully gotten Debian to boot on one of these beasts. To make a long story short, I'm running the unstable/testing branch of Debian on the machine now, and it appears to be in pretty good shape. I've had a few oddities (see below), but overall things work pretty well. Maintaining an Image -------------------- Dave Miller at Red Hat pointed me to Ben Collins' collection of boot images: http://auric.debian.org/~bcollins/disks-sparc/ I first tried booting with the then-latest images, found in the 3.0.9-2001-08-10 directory. Those didn't work, so Ben suggested I try an older set. Bingo. The images in the 2.3.6-2001-06-22/sun4u directory worked well for me. There have been problems getting UltraSPARC IIs to boot from a floppy image, and I didn't want to mess with building a custom ISO using Ben's boot image, so I went the route of using the 'boot net' feature in the Sun's PROM. The boot image I grabbed was 2.3.6-2001-06-22/sun4u/tftpboot.img Preparing for Boot Net ---------------------- On my x86 Linux workstation (running Red Hat 7.1), I installed the tftp-server and rarpd packages and did the work necessary to get them to work: 1. Populate /etc/ethers so rarpd could provide the SunBlade's PROM with a hostname at boot time. The PROM will report the MAC address of its primary network card. I copied it and the SunBlade's hostname into /etc/ethers, e.g., 00:ff:11:ee:22:dd sunblade.host.name (One of the benefits of using a 2.4 kernel is that rarpd can now run as a user-space daemon. Previously, you had to compile support for it directly into the kernel.) 2. Move Ben's tftpboot.img file to the /tftpboot directory. 3. Then there's some tricky renaming or symlinking that has to be done. The Sun's PROM will request a file named after a hex version of its IP address. If the SunBlade's IP address were 192.168.1.100, then it would request a file named C0A80164. (Older PROM versions supposedly added an architecture-specific suffix to that filename, e.g., C0A80164.SUN4U, but that's not true for SunBlade.) So I symlinked the tftpboot.img to a hex name: # cd /tftpboot # ln -s tftpboot.img C0A80164 4. I updated /etc/xinetd.d/tftp to allow the SunBlade to initiate tftp connections and then restarted xinetd. I also started up rarpd (/etc/init.d/rarpd start). Back on the SunBlade, I typed 'boot net' at the PROM prompt. Whoopee! The SunBlade got its hostname from rarpd on the x86 box (and its IP address from my local DNS server), found the appropriate boot image, and started up. On with Debian -------------- By this time, it was pretty late in evening (maybe early in the morning, I can't really remember), and my note-taking slacked off considerably. OK, it slacked off altogether. :-P I'd never installed Debian before, but I remember thinking that anyone brave enough to attempt a Linux install on a SunBlade probably wouldn't have too much trouble with it. It was the usual routine: partition the disk, confirm the hostname/IP (I couldn't get DHCP to work at this point), choose a mirror, and install the base packages over the Internet. The Debian folks ought to be proud of their Internet installer; it worked as well as its cool FreeBSD counterpart. On the other hand, using dselect during the installation process was anything but intuitive. I botched quite a few package installations before deciding to stick with a very minimal install, figuring I'd get around to packages when I'd had enough sleep. The next day, I took a look at apt-get (Hey, Karl! Look, I used it!). It took me a couple hours to figure it out, but I eventually got the hang of it. I've since installed about 130 packages, all over the Internet, and all but one (imagemagick -- which I still can't get to work correctly in the unstable tree) installed without a hitch. Quirks ------ At this point, the system has been up for only a couple days (I went out of town two days after completing the installation and powered down the system while I was gone), but on the whole things are running smoothly. The exceptions: * The failure of the imagemagick installation has impaired my ability to use xfce since it can't figure out how to deal with .xpm images. Admittedly, however, I'm working with the *unstable* Debian branch, so I shouldn't expect everything to work flawlessly. * If I ssh into the SunBlade from another host using a Konsole window and run grep in such a way that it returns a lot of data, the Konsole session semi-freaks; the window background stays black no matter what I do. The only solution is to kill the session, open a new Konsole window, and log back into the SunBlade. The problem appears to be specific to grep; I can't duplicate the symptoms by, say, running cat against a bunch of large text files. * hdparm won't put the SunBlade's IDE disk into standby mode. * The ntpd supplied with the ntp package wouldn't work, and I couldn't get ntp-4.1.0 (compiled from source) to work as a broadcast client, though it does work when given a 'server' directive in ntp.conf. A Quick Ending -------------- I ran Solaris on the SunBlade for a few months before I finally got around to installing Linux. I have no direct benchmarks, but I will say that Linux *feels* faster than Solaris on this hardware. Only time will tell whether it's as stable... -- Paul Heinlein <[EMAIL PROTECTED]>
