Le mer 25/09/2002 à 15:15, Ben Collins a écrit : > > The (strange) problem is: > > 1?) when i don't put the 2nd card in my sparc, all works fine, i can > > dhcp on eth0 > > 2?) when i put the second one, dhcp doesn't work ( eth0 doesn't work: > > linux says "cable problem" ie twisted pairs RJ45 cable). But when i go > > into openprom i can self-test the both ethernet (connected one after one > > to the cable modem), and that's seem good ( i see good ethernet pacquet > > (a dot) and none bad eth pacquet (a X)). > > Are you sure that eth0 really is the card you think it is? Linux does > not order the same as the OBP does. Euh, i'm at home now and i've re-test and badabam... That was my problem, i'm a bit confused, perhaps i was too tired... Thans a lot!
cheers Christian > > If you want to force one card to be eth0, then compile the driver for > that card into the kernel, and compile the other ethernet driver as a > module and load it at boot. > > -- > Debian - http://www.debian.org/ > Linux 1394 - http://www.linux1394.org/ > Subversion - http://subversion.tigris.org/ > Deqo - http://www.deqo.com/ > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >
