On Sun, 2004-03-14 at 17:41, Marc Horowitz wrote: > Problem 3: Full-duplex doesn't work right. At boot, the interface > autonegotiates to 100baseTx-HD. If I use mii-tool to force it to full > duplex, I see reduced throughput, and a transmit error on every packet > is reported (but the packets are sent). > > Marc
My ultra2 did this when it was plugged into my old 10mbit switch(it went to 10 hd) If I forced it to 10 fd, it barely worked. Since I've gotten a new 100mbit switch, I haven't had any problems -- -Justin
