On Monday 15 March 2004 00:27, Marc Horowitz wrote: > >> My ultra2 did this when it was plugged into my old 10mbit switch(it went > >> to 10 hd) If I forced it to 10 fd, it barely worked. Since I've gotten > >> a new 100mbit switch, I haven't had any problems > I've got an HP procurve 2524 managed 10/100 switch. I've tried many > combinations of settings on both ends, but I couldn't win. Specific > suggestions of settings are encouraged.
My Ultra5 (hme) never had this problem, both 2.4 and 2.6 series went fine with no errors at all. #dmesg eth0: Link is up using internal transceiver at 100Mb/s, Full Duplex. And all I'm using is a poor man's Linksys 10/100 4 ports switch. Don't know what card the v100 uses, but most probably it's a driver issue, try booting a 2.6 kernel, never had problems with it on sparc64. Bye Antonello
