Hi, I have tried to install debian and gentoo on this SunFire 280r but without success. In google I found that it is possible to install debian (the first message below) on 280r. I tried many installation CDs and tftp boot images but there is no support for hard disks with fiber chanel. With gentoo i've stuck like in the second message below. I would prefer debian... So maybe, someone could give me some tips about initramfs tools any help is welcome.
Zares ----------------- "Hello world, I am trying to get an "old" Sun Fire 280R running with Debian. After one week trial and error I got the base system installed from BusinessCard-ISO using Etch beta3 (all others did not boot). Got the FC-AL-HDDs running with initramfstools loading qlogicfc using the original kernel (which did not recognize the controller on his own). Now I am trying to build a kernel (source 2.6.16) with integrated FC-AL-Support and some other features to maximize stability and minimize problems. At the moment I am really stuck with the graphics console - I can not get a local console running after loading the kernel from silo. There's a PGX64 (ATI-based) graphics card in this server. I am used to Debian on x86- and powerpc-architecture, but I am new to sparc. If anyone is using such a workgroup server with local console, it would be nice to get a running kernel config to have a usable base for further optimizations. Regards, Matthias Petz" ------------------ "I managed to install gentoo 2006.1 from Universal CD without connection to the network. I choose kernel 2.6.17 for compilation. Everything seems to be ok according to the manual for Sparc computers but after booting I got message "Can't open boot device" from OpenBoot PROM. I am not experienced with Sun architectures so my question is if the mistake is with linux (kernel or SILO) or rather with OpenBoot PROM? I have OpenBoot 4.10.11. After running SILO silo.conf seems to be OK. I've tried commands like "boot disk", "boot disk1" and so on but without success. My kernel after compilation is big above 4MB but there is in manual that it shouldn't be a problem with kernel version > 2.6.3 Thanks in advance for any suggestions Gentoo is my last hope to have Open Source software on this machine.... The only linux system which recognized the fiber chanel disks." -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
