Hej, Jeg fik den samme besked som Anders Breindahl med kommandoen # cdrecord -scanbus men med kommandoen # cdrecord dev=ATA: -scanbus , får jeg Cdrecord-Clone 2.01a34 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord and thus may have bugs that are not present in the original version. Please send bug reports and support requests to <[EMAIL PROTECTED]>. The original author should not be bothered with problems of this version.
scsidev: 'ATA:' devname: 'ATA' scsibus: -1 target: -1 lun: -1 Warning: Using badly designed ATAPI via /dev/hd* interface. cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. cdrecord: For possible transport specifiers try 'cdrecord dev=help'. cdrecord: cdrecord: For more information, install the cdrtools-doc cdrecord: package and read /usr/share/doc/cdrecord/README.ATAPI.setup . Altså stadig en fejlmeddelelse. Det bekræftiger min antagelse, at den sidstnævnte kommando virker med kerne 2.6., men ikke med 2.4. Derfor tænker jeg på at udskifte min kerne (2.4.26-1-k7) med 2.6.9-1-k7. I følge Debianguiden kan det gøres blot med kommandoen # apt-get install kernel-image-2.6.9-1-k7 Men er det virkelig så enkelt? Eller er der noget, man først skal sikre sig inden man springer ud? (Jeg har sikret mig, at pakken er tilgængelig via /etc/apt/sources.list) Med venlig hilsen Ole Hansen Søndag den 19. december 2004 14:55 skrev Anders Breindahl: > Hej, > Jeg prøvede lige at køre et par kommandoer på min egen maskine: > Først denne kommando: > # cdrecord -scanbus > Cdrecord-Clone 2.01a38 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg > Schilling NOTE: this version of cdrecord is an inofficial (modified) > release of cdrecord and thus may have bugs that are not present in the > original version. Please send bug reports and support requests to > <[EMAIL PROTECTED]>. The original author should not be bothered > with problems of this version. > > cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open > SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. > cdrecord: For possible transport specifiers try 'cdrecord dev=help'. > cdrecord: > cdrecord: For more information, install the cdrtools-doc > cdrecord: package and read /usr/share/doc/cdrecord/README.ATAPI.setup . > > > > Og så denne: > # cdrecord dev=ATA: -scanbus > Cdrecord-Clone 2.01a34 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg > Schilling NOTE: this version of cdrecord is an inofficial (modified) > release of cdrecord and thus may have bugs that are not present in the > original version. Please send bug reports and support requests to > <[EMAIL PROTECTED]>. The original author should not be bothered > with problems of this version. > > scsidev: 'ATA:' > devname: 'ATA' > scsibus: -1 target: -1 lun: -1 > Warning: Using badly designed ATAPI via /dev/hd* interface. > Linux sg driver version: 3.5.27 > Using libscg version 'schily-0.8'. > scsibus0: > 0,0,0 0) * > 0,1,0 1) 'TOSHIBA ' 'DVD-ROM SD-C2502' '1D13' Removable CD-ROM > 0,2,0 2) * > 0,3,0 3) * > 0,4,0 4) * > 0,5,0 5) * > 0,6,0 6) * > 0,7,0 7) * > > Jeg finder dette interessant - monstro det kan hjælpe dig, også, til trods > for at du ikke kører 2.6.9? Ydermere er mange tilfredse med at bruge > frontenden k3b i KDE. > > Med venlig hilsen, Anders Breindahl. >
