De plus, la commande scanimage -L me renvoie:
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). maisondebian:/dev# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x04b8 [EPSON], product=0x011f [EPSON Scanner]) at libusb:001:005
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program.
Je ne comprends pas Sane est suppos� bien support� ce mat�riel et il est reconnu ..... mais pas identifi�.............
Merci de vos pr�cisions......
Mario
Mario Lachance a �crit :
Je continue le diagnostique:
La commande cat /proc/bus/usb/drivers me renvoie: usbdevfs hub 0- 15: usblp 48- 63: usbscanner
La commande cat /proc/bus/usb/devices me renvoie: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 17/900 us ( 2%), #Int= 1, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=ef80 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=04b8 ProdID=011f Rev= 1.07 S: Manufacturer=EPSON S: Product=EPSON Scanner C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbscanner E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=16ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04b8 ProdID=0005 Rev= 1.00 S: Manufacturer=EPSON S: Product=USB Printer S: SerialNumber=L81010311011029190 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
Et sane ne d�tecte toujours pas de scanneur.
Merci
Mario Lachance a �crit :
Bonjour � tous,
Je suis en Debain Sarge et la version du kernel est 2.4.27-2-586tsc. J'ai install� Sane pour faire fonctionner un scanneur Epson Perfection 1670. Et le tout refuse de fonctionner.
J'aimerais savoir par quel bout commencer car j'ai essay� sur le site de sane et je ne trouve rien qui m'aide.
Merci
Mario
-- Pensez � lire la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench
Pensez � rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
