Bonjour, Je possède un disque SATA pour mon pc familial et mon portable est en IDE.
J'ai suivi ce tuto : http://www.pc-boost.com/optimisation_linux.php pour optimiser mon portable : neptune:/home/jp# hdparm -i /dev/hda /dev/hda: Model=ST94019A, FwRev=3.05, SerialNo=3KW3RVYJ Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=78140160 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 AdvancedPM=yes: unknown setting WriteCache=enabled Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2: ATA/ATAPI-1,2,3,4,5,6 * signifies the current active mode neptune:/home/jp# hdparm -X69 -d1 -u1 -m16 -c3 -W1 /dev/hda Par contre, sur mon pc familial, c'est la cata : [EMAIL PROTECTED]:/home/jp# hdparm -i /dev/sda /dev/sda: Model=Maxtor 6V160E0 , FwRev=VA111630, SerialNo=V3095B9G Config={ Fixed } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=?16? CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 AdvancedPM=yes: disabled (255) WriteCache=enabled Drive conforms to: ATA/ATAPI-7 T13 1532D revision 0: ATA/ATAPI-1,2,3,4,5,6,7 * signifies the current active mode Apparement, aucun mode n'est actif. Etrange, non ? [EMAIL PROTECTED]:/home/jp# hdparm -X69 -d1 -u1 -m16 -c3 -W1 /dev/sda /dev/sda: setting 32-bit IO_support flag to 3 HDIO_SET_32BIT failed: Invalid argument setting multcount to 16 HDIO_SET_MULTCOUNT failed: Inappropriate ioctl for device setting unmaskirq to 1 (on) HDIO_SET_UNMASKINTR failed: Inappropriate ioctl for device setting using_dma to 1 (on) HDIO_SET_DMA failed: Inappropriate ioctl for device setting xfermode to 69 (UltraDMA mode5) SG_IO: bad/missing ATA_16 sense data:: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 HDIO_DRIVE_CMD(setxfermode) failed: Input/output error setting drive write-caching to 1 (on) HDIO_GET_MULTCOUNT failed: Inappropriate ioctl for device IO_support = 0 (default 16-bit) write-caching = 1 (on) Bref, j'ai essayé pas mal de trucs mais sans succès... Auriez-vous une idée ? Merci. Zelos -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et "Reply-To:" To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
