Marc Schiffbauer schrieb:
> * Gerhard Engler schrieb am 09.07.02 um 08:40 Uhr:
>>Marc Schiffbauer schrieb:
>>>* Gerhard Engler schrieb am 08.07.02 um 16:33 Uhr:
> das cd entspricht deinem scd0 und das generic deinem sg0. Ich
> benutze devfs, da sieht das etwas anders aus.
>
> sieht gut aus.
>
>>Ich habe nicht verstanden was die Fehlermeldung "SCSI Target Error"
>>bedeutet.
>
> mal danach gegoogled?
Ja, das mache ich immer bevor ich Mailinglisten bel�stige.
> Ist das ein SCSI Brenner oder ein IDE mit ide-scsi?
Ich brenne mit einem TEAC 58 - Ein SCSI-Brenner (SCSI II).
>
>
> Also es geht grunds�tzlich, aber mittendrin beim brennen gibts den
> Fehler?
Der Fehler kommt manchmal schon bei der Brenn-Simulation, machmal aber
auch erst beim echten Brennen. Unten habe ich noch die Fehler-Log-Datei
von Nero angeh�ngt.
Wasn das f�r eine Hardware? Vielleicht ist die net stark
> genug... ;)
Es ist ein PIII/800 mit 256 Mhz. Ich glaube, daran kann es nicht liegen.
Hier noch der Fehler-Log von Nero:
Windows 2000 5.0
WinAspi: -
ahead WinASPI: File 'C:\Programme\ahead\Nero\Wnaspi32.dll':
Ver=2.0.1.28, size=172099 bytes, created 08.07.2002 15:06:07
Nero Version: 5.5.6.4
Rekorder: <TEAC CD-R58S> Version: 1.0P - HA 0 TA
4 - 5.5.6.4
Adapter-Treiber: <BusLogic> HA 0
Drive buffer : 2678kB
Bus Type : default (0) -> SCSI
CD-ROM: <TEAC CD-R58S> Version: 1.0P - HA 0 TA
4 - 5.5.6.4
Adapter-Treiber: <BusLogic> HA 0
Bus Type : default (0) -> SCSI
=== Scsi-Device-Map ===
DiskPeripheral : VMware, VMware Virtual S1.0 BusLogic Port 0 ID
0 DMA: ?
CdRomPeripheral : TEAC CD-R58S 1.0P BusLogic Port 0 ID
4 DMA: ?
OtherPeripheral : MYLEX GAM Device BusLogic Port 0 ID
6 DMA: ?
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 17825792 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 95MB (97844kB)
Free physical memory: 12MB (12668kB)
Memory in use : 87 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Wizard: Off
CD-Image
9.7.2002
19:38:49
#1 Text 0 File Reader.cpp, Line 117
Reader running
19:38:49
#2 Text 0 File Writer.cpp, Line 127
Writer TEAC CD-R58S running
19:38:49
#3 IMAGEGEN -10 File ImageGen.cpp, Line 354
Image was written as DAO.
DAOI:
MediaCatalogNumber=''
TocType=0x20
Finalized=0x01
FirstTrack=0x01
LastTrack=0x02
ISRC=''
Blocksize=2336:
TrackMode='TRM_DATA_MODE2_2336'
TrackConfig=0x00:
FirstIndex=00:
LastIndex=01:
Index0FilePos=0 Index1FilePos=350400 NextTrackFilePos=2948032
ISRC=''
Blocksize=2336:
TrackMode='TRM_DATA_MODE2_2336'
TrackConfig=0x00:
FirstIndex=00:
LastIndex=01:
Index0FilePos=2948032 Index1FilePos=3298432 NextTrackFilePos=793265888
CUES:
000: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 (
-150)
001: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 (
-150)
002: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
003: Ctrl=0x41 Trk= 2 (0x02) Index=00 RecDep=0x00 Start=00:14.62 ( 1112)
004: Ctrl=0x41 Trk= 2 (0x02) Index=01 RecDep=0x00 Start=00:16.62 ( 1262)
005: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=75:25.58 ( 339433)
19:38:49
#4 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (original item values)
0: TRM_DATA_MODE2_2336 (CD-ROM Mode2/XA)
2 indices, index0 (150) provided
original CD pos #0 + 1112 (1112) = #1112/0:14.62
relocatable, CD pos for caching/writing not required/not required,
patch infos
1: TRM_DATA_MODE2_2336 (CD-ROM Mode2/XA)
2 indices, index0 (150) provided
original CD pos #1262 + 338171 (338171) = #339433/75:25.58
relocatable, CD pos for caching/writing not required/not required,
patch infos
--------------------------------------------------------------
19:38:58
#5 Text 0 File DlgWaitCD.cpp, Line 194
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 339435 (75:27.60)
19:39:00
#6 Text 0 File DlgWaitCD.cpp, Line 1331
Recorder: TEAC CD-R58S;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F
3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid),
3: 00 00 00 (invalid)
19:39:00
#7 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder TEAC CD-R58S for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x20 Close CD
Tracks 1 to 2:
TRM_DATA_MODE2_2336, 2336/0x0, ISRC "", FilePos 0 350400 2948032
TRM_DATA_MODE2_2336, 2336/0x0, ISRC "", FilePos 2948032 3298432 793265888
19:39:00
#8 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CD-ROM Mode2/XA)
2 indices, index0 (150) provided
original CD pos #0 + 1112 (1112) = #1112/0:14.62
relocatable, CD pos for caching/writing not required/not required,
patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks,
length 1112 blocks [TEAC CD-R58S ]
1: TRM_DATA_MODE2_2336 (CD-ROM Mode2/XA)
2 indices, index0 (150) provided
original CD pos #1262 + 338171 (338171) = #339433/75:25.58
relocatable, CD pos for caching/writing not required/not required,
patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks,
length 338171 blocks [TEAC CD-R58S ]
--------------------------------------------------------------
19:39:00
#9 Phase 32 File dlgbrnst.cpp, Line 1436
Start der Simulation mit 6x (900 KB/s)
19:39:00
#10 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (relocatable, no CD pos, patch infos,
orig at #0): write at #0
19:39:00
#11 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 1 (relocatable, no CD pos, patch infos,
orig at #1262): write at #1262
19:52:01
#12 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
19:52:23
#13 Phase 33 File dlgbrnst.cpp, Line 1436
Simulation mit 6x (900 KB/s) war erfolgreich
19:52:24
#14 Phase 36 File dlgbrnst.cpp, Line 1436
Start des Brennvorganges mit 6x (900 KB/s)
19:52:25
#15 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (relocatable, no CD pos, patch infos,
orig at #0): write at #0
19:52:25
#16 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 1 (relocatable, no CD pos, patch infos,
orig at #1262): write at #1262
19:53:07
#17 SCSI -400 File Cdrdrv.cpp, Line 1407
SCSI Exec, HA 0, TA 4, LUN 0, buffer 0x03FC0054
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x1C 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0xB0 0xB0 0xD0 0xBA 0x00 0x00
19:53:07
#18 CDR -400 File Writer.cpp, Line 321
SCSI Target error
19:53:07
#19 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
19:53:08
#20 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader
19:53:15
#21 Phase 38 File dlgbrnst.cpp, Line 1436
Brennvorgang nicht erfolgreich mit 6x (900 KB/s)
19:53:15
#22 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (089), size=52720 bytes, created
02.03.2001 20:55:54
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1030), size=22585 bytes, created
02.03.2001 20:55:54
--
Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
