Hmm, ich habe auch nichts gefunden ;-))
Wenn ich aber als root 'mcedit /etc/lilo.conf' mache ist sie wundersamerweise daaaaa.
Hm, pequod:/home/manni# nano /etc/lilo.conf ergibt bei mir:
<schnipp> lba32 # Generated by liloconfig
# Specifies the boot device boot=/dev/hdb5
# Specifies the device that should be mounted as root. # If the special name CURRENT is used, the root device is set to the # device on which the root file system is currently mounted. If the root # has been changed with -r , the respective device is used. If the # variable ROOT is omitted, the root device setting contained in the # kernel image is used. It can be changed with the rdev program. root=/dev/hdb5
# Enables map compaction: # Tries to merge read requests for adjacent sectors into a single # read request. This drastically reduces load time and keeps the map # smaller. Using COMPACT is especially recommended when booting from a # floppy disk. # compact bitmap=/usr/share/lilo/contrib/sid.bmp bmp-colors=1,,0,2,,0 bmp-table=120p,173p,1,15,17 bmp-timer=254p,432p,1,0,0
# Install the specified file as the new boot sector. # If INSTALL is omitted, /boot/boot.b is used as the default. # Note: /boot/boot-bmp.b must be used in order to the boot menu works. # install=/boot/boot.b install=/boot/boot-bmp.b
# Specifies the number of _tenths_ of a second LILO should # wait before booting the first image. LILO # doesn't wait if DELAY is omitted or if DELAY is set to zero. # delay=20
# Prompt to use certaing image. If prompt is specified without timeout, # boot will not take place unless you hit RETURN prompt timeout=50
# Specifies the location of the map file. If MAP is # omitted, a file /boot/map is used.
map=/boot/map
# Specifies the VGA text mode that should be selected when # booting. The following values are recognized (case is ignored): # NORMAL select normal 80x25 text mode. # EXTENDED select 80x50 text mode. The word EXTENDED can be # abbreviated to EXT. # ASK stop and ask for user input (at boot time). # <number> use the corresponding text mode. A list of available modes # can be obtained by booting with vga=ask and pressing [Enter]. vga=normal
image=/vmlinuz
label=Debian
read-only# If you have another OS on this machine (say DOS), # you can boot if by uncommenting the following lines # (Of course, change /dev/hda2 to wherever your DOS partition is.) # other=/dev/hda2 # label=dos <schnapp>
Beim starten zeigt mir Lilo: Linux WinNT(/dev/hda1) usw. das heisst es ist nicht diese lilo.conf
Und nu? ciao Manni, der R�tselnde
--
Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/
Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
