Sim, isso já era esperado.
Já havia visto no LinuxSociALL também que estão usando redes sociais para responder perguntas
http://www.linuxsociall.com/
Que não é érrado, é prestar o suporte e o conforto para o usuário. O problema é que correrão o risco dos usuários ficarem deseducados a buscar uma resposta antes de perguntar. Lembro-me na minha época de Facebook que em outras situações, havia muitas questões (não sobre software livre) que eram correiqueiras e repetitivas. Ainda mais por si tratar de uma rede com uma péssima e desencorajadora pesquisa sobre conteúdo passado.
Att.
Thiago Zoroastro
http://blogoosfero.cc/profile/thiagozoroastro
De: he...@loureiro.eng.br
Enviada: Domingo, 6 de Julho de 2014 22:28
Para: debian-user-portuguese@lists.debian.org
Assunto: Raid - Problema com boot
Oi,
Era só pra confirmar que as coisas tão funcionando melhor em pergunta-resposta no FB que por aqui.
Era só pra confirmar que as coisas tão funcionando melhor em pergunta-resposta no FB que por aqui.
2014-07-05 22:20 GMT-03:00 Sérgio Abrantes Junior <sergioabran...@gmail.com>:
Sérgio AbrantesValeuAssunto resolvido.Olá Helio,Sou eu mesmo.
2014-07-04 13:46 GMT-03:00 Helio Loureiro <he...@loureiro.eng.br>:
Foi vc que postou essa dúvida no facebook, e acabou resolvendo?
2014-06-28 22:16 GMT-03:00 Sérgio Abrantes Junior <sergioabran...@gmail.com>:
Segue abaixo mais alguns confs que possam ajudar:Alguém já passou por isso?Ele aparece o kernel para escolha na inicialização, mas depois não continua a sequência de inicialização do linux.Fazendo teste de boot apenas com o disco 1 e depois com o disco 2, apenas com um disco funciona.Fiz o RAID na instalação e com um cat em /proc/mdstat não apresenta problema como abaixo:Olá pessoal,Estou montando um servidor com RAID1.
sergio@firewall:~$ cat /proc/mdstat
Personalities : [raid1]
md3 : active (auto-read-only) raid1 sda5[0] sdb5[1]
3973056 blocks super 1.2 [2/2] [UU]
md2 : active raid1 sda3[0] sdb3[2]
258658112 blocks super 1.2 [2/2] [UU]
md1 : active raid1 sda2[0] sdb2[2]
48795520 blocks super 1.2 [2/2] [UU]
md0 : active raid1 sda1[0] sdb1[2]
975296 blocks super 1.2 [2/2] [UU]
unused devices: <none>
sergio@firewall:~$
sergio@firewall:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/md2 during installation
UUID=86cb1813-97e4-4c77-8bef-4b51db654929 / ext4 errors=remount-ro 0 1
# /boot was on /dev/md0 during installation
UUID=033fb59a-1158-4117-ae09-1207cc0a3515 /boot ext4 defaults 0 2
# /var/log/squid3 was on /dev/md1 during installation
UUID=db91f114-4f55-47cf-8c58-bfbb938419a2 /var/log/squid3 xfs defaults 0 2
# swap was on /dev/md3 during installation
UUID=507e3064-3f8b-4829-b85c-80be6b12a3b0 none swap sw 0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
/dev/sdc1 /media/usb0 auto rw,user,noauto 0 0
sergio@firewall:~$ cat /etc/mdadm/mdadm.conf
# mdadm.conf
#
# Please refer to mdadm.conf(5) for information about this file.
#
# by default (built-in), scan all partitions (/proc/partitions) and all
# containers for MD superblocks. alternatively, specify devices to scan, using
# wildcards if desired.
#DEVICE partitions containers
# auto-create devices with Debian standard permissions
CREATE owner=root group=disk mode=0660 auto=yes
# automatically tag new arrays as belonging to the local system
HOMEHOST <system>
# instruct the monitoring daemon where to send mail alerts
MAILADDR xx@xx
# definitions of existing MD arrays
ARRAY /dev/md/0 metadata=1.2 UUID=9ae2e8d4:5f169306:bef7d42d:a8049ecf name=firewall:0
ARRAY /dev/md/1 metadata=1.2 UUID=55d87a74:44b932f3:9b6fe3f1:fad68002 name=firewall:1
ARRAY /dev/md/2 metadata=1.2 UUID=2bbb8f3d:17406b01:74235ee3:e38a9956 name=firewall:2
ARRAY /dev/md/3 metadata=1.2 UUID=65bc2a88:3ad32bcd:cdf3d0e2:a746221e name=firewall:3
# This file was auto-generated on Sat, 28 Jun 2014 17:04:02 -0300
# by mkconf 3.2.5-5
sergio@firewall:~$
root@firewall:/boot/grub# cat grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod raid
insmod mdraid1x
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/2bbb8f3d17406b0174235ee3e38a9956)'
search --no-floppy --fs-uuid --set=root 86cb1813-97e4-4c77-8bef-4b51db654929
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
insmod raid
insmod mdraid1x
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/9ae2e8d45f169306bef7d42da8049ecf)'
search --no-floppy --fs-uuid --set=root 033fb59a-1158-4117-ae09-1207cc0a3515
set locale_dir=($root)/grub/locale
set lang=pt_BR
insmod gettext
fi
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Debian GNU/Linux, with Linux 3.2.0-4-amd64' --class debian --class gnu-linux --class gnu --class os {
load_video
insmod gzio
insmod raid
insmod mdraid1x
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/9ae2e8d45f169306bef7d42da8049ecf)'
search --no-floppy --fs-uuid --set=root 033fb59a-1158-4117-ae09-1207cc0a3515
echo 'Loading Linux 3.2.0-4-amd64 ...'
linux /vmlinuz-3.2.0-4-amd64 root=UUID=86cb1813-97e4-4c77-8bef-4b51db654929 ro quiet
echo 'Loading initial ramdisk ...'
initrd /initrd.img-3.2.0-4-amd64
}
menuentry 'Debian GNU/Linux, with Linux 3.2.0-4-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os {
load_video
insmod gzio
insmod raid
insmod mdraid1x
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(mduuid/9ae2e8d45f169306bef7d42da8049ecf)'
search --no-floppy --fs-uuid --set=root 033fb59a-1158-4117-ae09-1207cc0a3515
echo 'Loading Linux 3.2.0-4-amd64 ...'
linux /vmlinuz-3.2.0-4-amd64 root=UUID=86cb1813-97e4-4c77-8bef-4b51db654929 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-3.2.0-4-amd64
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
root@firewall:/boot/grub#