Ok, mas há quanto tempo você não utiliza wifi no windows ? Desde a sua instalação atual do Linux nunca funcionou ? Ou funcionava e parou ?
Em 12 de agosto de 2016 10:03, Thiago Canuto <[email protected]> escreveu: > Bom dia Rodolfo. > > Antes era o Windows XP e funcionava o Wifi. > > Thiago > > Em sex, 12 de ago de 2016 às 07:40, Rodolfo <[email protected]> escreveu: > >> Você tem o windows nesse notebook ? Já tentou utilizar o windows e >> verificar se a wifi funciona ? Só para descartar problemas de hardware.... >> >> Em 12 de agosto de 2016 00:28, Thiago Canuto <[email protected]> >> escreveu: >> >>> Olá Rodolfo. >>> >>> Antes de tudo, obrigado pela ajuda. >>> >>> Demorei, mas voltei. Peço desculpas pela demora, se for algum problema. >>> >>> Então... voltando... instalei hoje firmware-linux-nonfree, mas ainda >>> continuo sem reconhecer o Wifi. >>> >>> Tenho sim instalados, conforme me mostra através do comando na qual me >>> ensinou. >>> >>> ~$ dpkg -l |grep b43 >>> ii b43-fwcutter 1:019-2 >>> i386 utility for extracting Broadcom 43xx firmware >>> ii firmware-b43-installer 1:019-2 >>> all firmware installer for the b43 driver >>> >>> Mesmo assim, não liga o Wifi >>> >>> E agora, qual o próximo passo? >>> >>> Thiago >>> >>> >>> Em ter, 5 de jul de 2016 às 18:16, Rodolfo <[email protected]> >>> escreveu: >>> >>>> Primeiro, eu mandei uma mensagem hoje falando que eu tinha escrito o >>>> nome do pacote errado, o certo é: >>>> >>>> firmware-linux-nonfree >>>> >>>> Segundo, você está executando como root ? >>>> >>>> Por último, você não disse que já tinha instalado o b43-fwcutter ? como >>>> assim você deseja saber se já tem instalado ? você já não sabia antes ? >>>> >>>> O comando para ver pacotes instalados é: >>>> >>>> dpkg -l >>>> >>>> para filtrar para ver um pacote específico: >>>> >>>> dpkg -l | grep b43 >>>> >>>> ou dpkg -l | grep firmware >>>> >>>> Abraços. >>>> >>>> Em 5 de julho de 2016 17:43, Thiago Canuto <[email protected]> >>>> escreveu: >>>> >>>>> Olá. Tentei o comando: >>>>> # apt-get install b43-fwcutter linux-firmware-nonfree >>>>> >>>>> Depois me apareceu a seguinte mensagem: >>>>> >>>>> # apt-get install b43-fwcutter linux-firmware-nonfree >>>>> E: Não foi possível obter trava /var/lib/dpkg/lock - open (11: Recurso >>>>> temporariamente indisponível) >>>>> E: Não foi possível obter acesso exclusivo ao directório de >>>>> administração (/var/lib/dpkg/), outro processo está a utilizá-lo? >>>>> >>>>> Aproveito e pergunto como saber se já tenho instalado, caso já tenha >>>>> instalado? Pois não me lembro. >>>>> >>>>> 2016-07-05 16:20 GMT-04:00 Rodolfo <[email protected]>: >>>>> >>>>>> Oxi, agora que vi, escrevi errado, o certo é: >>>>>> >>>>>> firmware-linux-nonfree >>>>>> >>>>>> hehehe, desculpem, mas e como disse o Vinícius, instalou o >>>>>> firmware-linux-nonfree ? >>>>>> >>>>>> Abraços. >>>>>> >>>>>> 2016-07-05 13:36 GMT-04:00 Vinícius RM <[email protected]>: >>>>>> >>>>>>> E o linux-firmware-nonfree? >>>>>>> >>>>>>> 2016-07-05 0:24 GMT-03:00 Thiago Canuto <[email protected]>: >>>>>>> >>>>>>>> Olá. >>>>>>>> >>>>>>>> Sim. Já tenho instalado o b43-fwcutter. Instalei pelo Synaptic. >>>>>>>> >>>>>>>> >>>>>>>> 2016-07-04 7:16 GMT-04:00 Rodolfo <[email protected]>: >>>>>>>> >>>>>>>>> No meu notebook anterior eu usava a Broadcom sem problemas e >>>>>>>>> dificuldades, mas antes tive que instalar esses pacotes: >>>>>>>>> >>>>>>>>> # apt-get install b43-fwcutter linux-firmware-nonfree >>>>>>>>> >>>>>>>>> Verifique se você tem eles instalado. >>>>>>>>> >>>>>>>>> 2016-07-04 2:15 GMT-04:00 Thiago Canuto <[email protected] >>>>>>>>> >: >>>>>>>>> >>>>>>>>>> Olá. >>>>>>>>>> >>>>>>>>>> Também estou com este problema atualmente. Estou usando um >>>>>>>>>> notebook STi IS-1451, e já tem mais de 1 semana que tento varias >>>>>>>>>> alternativas para solucionar, mas nada de resolver este problema. >>>>>>>>>> Pesquisei >>>>>>>>>> em fóruns, sites, etc. e em ultimo caso decidi "incomodar" :-[ a >>>>>>>>>> comunidade e pedir ajuda aqui. >>>>>>>>>> >>>>>>>>>> Fiz todos os passos iniciais depois de instalar como: >>>>>>>>>> >>>>>>>>>> *Atualizar a source.list com contrib non-free;* >>>>>>>>>> >>>>>>>>>> # Debian 8 "Jessie" >>>>>>>>>> deb http://httpredir.debian.org/debian/ jessie main contrib >>>>>>>>>> non-free >>>>>>>>>> >>>>>>>>>> Instalei o firmware b43 através do Synaptic; >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> * No link: https://wiki.debian.org/wl >>>>>>>>>> <https://wiki.debian.org/wl> , fiz os procedimentos:* >>>>>>>>>> >>>>>>>>>> Installation >>>>>>>>>> >>>>>>>>>> Add a "non-free" component to /etc/apt/sources.list for your >>>>>>>>>> Debian version, for example: >>>>>>>>>> >>>>>>>>>> *# Debian 8 "Jessie"* >>>>>>>>>> * deb http://httpredir.debian.org/debian/ >>>>>>>>>> <http://httpredir.debian.org/debian/> jessie main contrib non-free* >>>>>>>>>> >>>>>>>>>> Update the list of available packages. Install the >>>>>>>>>> relevant/latest linux-image, linux-headers and broadcom-sta-dkms >>>>>>>>>> packages: >>>>>>>>>> >>>>>>>>>> *# apt-get update* >>>>>>>>>> * # apt-get install linux-image-$(uname -r|sed >>>>>>>>>> 's,[^-]*-[^-]*-,,') linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') >>>>>>>>>> broadcom-sta-dkms* >>>>>>>>>> >>>>>>>>>> This will also install the recommended wireless-tools >>>>>>>>>> package. DKMS will build the wl module for your system. >>>>>>>>>> >>>>>>>>>> Unload conflicting modules: >>>>>>>>>> >>>>>>>>>> *# modprobe -r b44 b43 b43legacy ssb brcmsmac bcma* >>>>>>>>>> >>>>>>>>>> Load the wl module: >>>>>>>>>> >>>>>>>>>> *# modprobe wl* >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> *Digitei o comando:* >>>>>>>>>> >>>>>>>>>> *# iwconfig wlan0* >>>>>>>>>> *wlan0 No such device* >>>>>>>>>> >>>>>>>>>> Instalei o *laptop-mode-tools* através do Synaptic. >>>>>>>>>> >>>>>>>>>> Alterei o *WIRELESS_BATT_POWER_SAVING=0* dentro de >>>>>>>>>> /etc/laptop-mode/conf.d/wireless-power.conf e reinicie o notebook >>>>>>>>>> >>>>>>>>>> Depois disso não consegui mais visualizar o *wlan0*. Antes de >>>>>>>>>> fazer os comandos acima do site https://wiki.debian.org/wl eu >>>>>>>>>> conseguia visualizar, porem sem ter acesso ao Wifi. >>>>>>>>>> >>>>>>>>>> Depois pesquisando em alguns fóruns descobri alguns comandos que >>>>>>>>>> me mostra as informações sobre o wifi, que pode ser útil. Me >>>>>>>>>> apareceu isto: >>>>>>>>>> >>>>>>>>>> *lspci -k |grep -A2 -i network* >>>>>>>>>> 03:00.0 Network controller: Broadcom Corporation BCM4311 >>>>>>>>>> 802.11b/g WLAN (rev 01) >>>>>>>>>> Subsystem: Quanta Microsystems, Inc Device 1102 >>>>>>>>>> 05:00.0 Ethernet controller: Marvell Technology Group Ltd. >>>>>>>>>> 88E8055 PCI-E Gigabit Ethernet Controller (rev 11) >>>>>>>>>> >>>>>>>>>> *Drivers:* >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> *$ ls -l /lib/modules/`uname -r`/kernel/drivers/net/wireless/* >>>>>>>>>> *total 648* >>>>>>>>>> -rw-r--r-- 1 root root 37160 Abr 8 19:21 adm8211.ko >>>>>>>>>> -rw-r--r-- 1 root root 7284 Abr 8 19:21 airo_cs.ko >>>>>>>>>> -rw-r--r-- 1 root root 96676 Abr 8 19:21 airo.ko >>>>>>>>>> -rw-r--r-- 1 root root 53388 Abr 8 19:21 at76c50x-usb.ko >>>>>>>>>> drwxr-xr-x 9 root root 4096 Jun 19 19:03 ath >>>>>>>>>> -rw-r--r-- 1 root root 10688 Abr 8 19:21 atmel_cs.ko >>>>>>>>>> -rw-r--r-- 1 root root 48124 Abr 8 19:21 atmel.ko >>>>>>>>>> -rw-r--r-- 1 root root 4196 Abr 8 19:21 atmel_pci.ko >>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 b43 >>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 b43legacy >>>>>>>>>> drwxr-xr-x 5 root root 4096 Jun 19 19:03 brcm80211 >>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 hostap >>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 ipw2x00 >>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 iwlegacy >>>>>>>>>> drwxr-xr-x 4 root root 4096 Jun 19 19:03 iwlwifi >>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 libertas >>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 libertas_tf >>>>>>>>>> -rw-r--r-- 1 root root 49656 Abr 8 19:21 mac80211_hwsim.ko >>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 mwifiex >>>>>>>>>> -rw-r--r-- 1 root root 64476 Abr 8 19:21 mwl8k.ko >>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 orinoco >>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 p54 >>>>>>>>>> -rw-r--r-- 1 root root 63056 Abr 8 19:21 ray_cs.ko >>>>>>>>>> -rw-r--r-- 1 root root 62060 Abr 8 19:21 rndis_wlan.ko >>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 rsi >>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 rt2x00 >>>>>>>>>> drwxr-xr-x 4 root root 4096 Jun 19 19:03 rtl818x >>>>>>>>>> drwxr-xr-x 12 root root 4096 Jun 19 19:03 rtlwifi >>>>>>>>>> -rw-r--r-- 1 root root 29420 Abr 8 19:21 wl3501_cs.ko >>>>>>>>>> -rw-r--r-- 1 root root 29176 Abr 8 19:21 zd1201.ko >>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 zd1211rw >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> *# lspci -nn -d 14e4:* >>>>>>>>>> 03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 >>>>>>>>>> 802.11b/g WLAN [14e4:4311] (rev 01) >>>>>>>>>> >>>>>>>>>> *Driver carregado:* >>>>>>>>>> >>>>>>>>>> *~$ lspci -k |grep -A2 -i network* >>>>>>>>>> 03:00.0 Network controller: Broadcom Corporation BCM4311 >>>>>>>>>> 802.11b/g WLAN (rev 01) >>>>>>>>>> Subsystem: Quanta Microsystems, Inc Device 1102 >>>>>>>>>> 05:00.0 Ethernet controller: Marvell Technology Group Ltd. >>>>>>>>>> 88E8055 PCI-E Gigabit Ethernet Controller (rev 11) >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> *$ lspci* >>>>>>>>>> 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, >>>>>>>>>> 943/940GML and 945GT Express Memory Controller Hub (rev 03) >>>>>>>>>> 00:02.0 VGA compatible controller: Intel Corporation Mobile >>>>>>>>>> 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) >>>>>>>>>> 00:02.1 Display controller: Intel Corporation Mobile >>>>>>>>>> 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller >>>>>>>>>> (rev 03) >>>>>>>>>> 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High >>>>>>>>>> Definition Audio Controller (rev 02) >>>>>>>>>> 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI >>>>>>>>>> Express Port 1 (rev 02) >>>>>>>>>> 00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI >>>>>>>>>> Express Port 2 (rev 02) >>>>>>>>>> 00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI >>>>>>>>>> Express Port 3 (rev 02) >>>>>>>>>> 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB >>>>>>>>>> UHCI Controller #1 (rev 02) >>>>>>>>>> 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB >>>>>>>>>> UHCI Controller #2 (rev 02) >>>>>>>>>> 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB >>>>>>>>>> UHCI Controller #3 (rev 02) >>>>>>>>>> 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB >>>>>>>>>> UHCI Controller #4 (rev 02) >>>>>>>>>> 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 >>>>>>>>>> EHCI Controller (rev 02) >>>>>>>>>> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge >>>>>>>>>> (rev e2) >>>>>>>>>> 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC >>>>>>>>>> Interface Bridge (rev 02) >>>>>>>>>> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE >>>>>>>>>> Controller (rev 02) >>>>>>>>>> 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M >>>>>>>>>> Family) SATA Controller [AHCI mode] (rev 02) >>>>>>>>>> 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus >>>>>>>>>> Controller (rev 02) >>>>>>>>>> 03:00.0 Network controller: Broadcom Corporation BCM4311 >>>>>>>>>> 802.11b/g WLAN (rev 01) >>>>>>>>>> 05:00.0 Ethernet controller: Marvell Technology Group Ltd. >>>>>>>>>> 88E8055 PCI-E Gigabit Ethernet Controller (rev 11) >>>>>>>>>> 07:01.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus >>>>>>>>>> Controller >>>>>>>>>> 07:01.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI >>>>>>>>>> Compliant IEEE 1394 Host Controller >>>>>>>>>> 07:01.2 Mass storage controller: Texas Instruments 5-in-1 >>>>>>>>>> Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) >>>>>>>>>> 07:01.3 SD Host controller: Texas Instruments PCIxx12 SDA >>>>>>>>>> Standard Compliant SD Host Controller >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> *# ifconfig -a *eth0 Link encap:Ethernet Endereço de HW >>>>>>>>>> 00:1b:24:47:96:a2 >>>>>>>>>> inet end.: 192.168.0.20 Bcast:192.168.0.255 >>>>>>>>>> Masc:255.255.255.0 >>>>>>>>>> endereço inet6: fe80::21b:24ff:fe47:96a2/64 Escopo:Link >>>>>>>>>> UP BROADCASTRUNNING MULTICAST MTU:1500 Métrica:1 >>>>>>>>>> RX packets:78036 errors:0 dropped:0 overruns:0 frame:0 >>>>>>>>>> TX packets:62759 errors:0 dropped:0 overruns:0 carrier:0 >>>>>>>>>> colisões:0 txqueuelen:1000 >>>>>>>>>> RX bytes:71494430 (68.1 MiB) TX bytes:7452824 (7.1 MiB) >>>>>>>>>> IRQ:18 >>>>>>>>>> >>>>>>>>>> lo Link encap:Loopback Local >>>>>>>>>> inet end.: 127.0.0.1 Masc:255.0.0.0 >>>>>>>>>> endereço inet6: ::1/128 Escopo:Máquina >>>>>>>>>> UP LOOPBACKRUNNING MTU:65536 Métrica:1 >>>>>>>>>> RX packets:34 errors:0 dropped:0 overruns:0 frame:0 >>>>>>>>>> TX packets:34 errors:0 dropped:0 overruns:0 carrier:0 >>>>>>>>>> colisões:0 txqueuelen:0 >>>>>>>>>> RX bytes:3547 (3.4 KiB) TX bytes:3547 (3.4 KiB) >>>>>>>>>> >>>>>>>>>> *(wlan0) sumiu!* >>>>>>>>>> >>>>>>>>>> digitei o comando *# rfkill list* mas não aparece nada >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>
