Desde o Ubuntu, depois Xubuntu, Lubuntu e por fim Debian com LXDE. Talvez se eu refizer os comandos anteriores feito no início ele volte a funcionar, ou talvez terei que add algo no black list. Eu não sei.
Em 10h05 sex, 12/08/2016, Rodolfo <[email protected]> escreveu: > Ok, mas há quanto tempo você não utiliza wifi no windows ? > > Desde a sua instalação atual do Linux nunca funcionou ? Ou funcionava e > parou ? > > Em 12 de agosto de 2016 10:03, Thiago Canuto <[email protected]> > escreveu: > >> Bom dia Rodolfo. >> >> Antes era o Windows XP e funcionava o Wifi. >> >> Thiago >> >> Em sex, 12 de ago de 2016 às 07:40, Rodolfo <[email protected]> >> escreveu: >> >>> Você tem o windows nesse notebook ? Já tentou utilizar o windows e >>> verificar se a wifi funciona ? Só para descartar problemas de hardware.... >>> >>> Em 12 de agosto de 2016 00:28, Thiago Canuto <[email protected]> >>> escreveu: >>> >>>> Olá Rodolfo. >>>> >>>> Antes de tudo, obrigado pela ajuda. >>>> >>>> Demorei, mas voltei. Peço desculpas pela demora, se for algum problema. >>>> >>>> Então... voltando... instalei hoje firmware-linux-nonfree, mas ainda >>>> continuo sem reconhecer o Wifi. >>>> >>>> Tenho sim instalados, conforme me mostra através do comando na qual me >>>> ensinou. >>>> >>>> ~$ dpkg -l |grep b43 >>>> ii b43-fwcutter >>>> 1:019-2 i386 utility for extracting >>>> Broadcom 43xx firmware >>>> ii firmware-b43-installer >>>> 1:019-2 all firmware installer for >>>> the b43 driver >>>> >>>> Mesmo assim, não liga o Wifi >>>> >>>> E agora, qual o próximo passo? >>>> >>>> Thiago >>>> >>>> >>>> Em ter, 5 de jul de 2016 às 18:16, Rodolfo <[email protected]> >>>> escreveu: >>>> >>>>> Primeiro, eu mandei uma mensagem hoje falando que eu tinha escrito o >>>>> nome do pacote errado, o certo é: >>>>> >>>>> firmware-linux-nonfree >>>>> >>>>> Segundo, você está executando como root ? >>>>> >>>>> Por último, você não disse que já tinha instalado o b43-fwcutter ? >>>>> como assim você deseja saber se já tem instalado ? você já não sabia >>>>> antes ? >>>>> >>>>> O comando para ver pacotes instalados é: >>>>> >>>>> dpkg -l >>>>> >>>>> para filtrar para ver um pacote específico: >>>>> >>>>> dpkg -l | grep b43 >>>>> >>>>> ou dpkg -l | grep firmware >>>>> >>>>> Abraços. >>>>> >>>>> Em 5 de julho de 2016 17:43, Thiago Canuto <[email protected]> >>>>> escreveu: >>>>> >>>>>> Olá. Tentei o comando: >>>>>> # apt-get install b43-fwcutter linux-firmware-nonfree >>>>>> >>>>>> Depois me apareceu a seguinte mensagem: >>>>>> >>>>>> # apt-get install b43-fwcutter linux-firmware-nonfree >>>>>> E: Não foi possível obter trava /var/lib/dpkg/lock - open (11: >>>>>> Recurso temporariamente indisponível) >>>>>> E: Não foi possível obter acesso exclusivo ao directório de >>>>>> administração (/var/lib/dpkg/), outro processo está a utilizá-lo? >>>>>> >>>>>> Aproveito e pergunto como saber se já tenho instalado, caso já tenha >>>>>> instalado? Pois não me lembro. >>>>>> >>>>>> 2016-07-05 16:20 GMT-04:00 Rodolfo <[email protected]>: >>>>>> >>>>>>> Oxi, agora que vi, escrevi errado, o certo é: >>>>>>> >>>>>>> firmware-linux-nonfree >>>>>>> >>>>>>> hehehe, desculpem, mas e como disse o Vinícius, instalou o >>>>>>> firmware-linux-nonfree ? >>>>>>> >>>>>>> Abraços. >>>>>>> >>>>>>> 2016-07-05 13:36 GMT-04:00 Vinícius RM <[email protected]>: >>>>>>> >>>>>>>> E o linux-firmware-nonfree? >>>>>>>> >>>>>>>> 2016-07-05 0:24 GMT-03:00 Thiago Canuto <[email protected]> >>>>>>>> : >>>>>>>> >>>>>>>>> Olá. >>>>>>>>> >>>>>>>>> Sim. Já tenho instalado o b43-fwcutter. Instalei pelo Synaptic. >>>>>>>>> >>>>>>>>> >>>>>>>>> 2016-07-04 7:16 GMT-04:00 Rodolfo <[email protected]>: >>>>>>>>> >>>>>>>>>> No meu notebook anterior eu usava a Broadcom sem problemas e >>>>>>>>>> dificuldades, mas antes tive que instalar esses pacotes: >>>>>>>>>> >>>>>>>>>> # apt-get install b43-fwcutter linux-firmware-nonfree >>>>>>>>>> >>>>>>>>>> Verifique se você tem eles instalado. >>>>>>>>>> >>>>>>>>>> 2016-07-04 2:15 GMT-04:00 Thiago Canuto < >>>>>>>>>> [email protected]>: >>>>>>>>>> >>>>>>>>>>> Olá. >>>>>>>>>>> >>>>>>>>>>> Também estou com este problema atualmente. Estou usando um >>>>>>>>>>> notebook STi IS-1451, e já tem mais de 1 semana que tento varias >>>>>>>>>>> alternativas para solucionar, mas nada de resolver este problema. >>>>>>>>>>> Pesquisei >>>>>>>>>>> em fóruns, sites, etc. e em ultimo caso decidi "incomodar" :-[ a >>>>>>>>>>> comunidade e pedir ajuda aqui. >>>>>>>>>>> >>>>>>>>>>> Fiz todos os passos iniciais depois de instalar como: >>>>>>>>>>> >>>>>>>>>>> *Atualizar a source.list com contrib non-free;* >>>>>>>>>>> >>>>>>>>>>> # Debian 8 "Jessie" >>>>>>>>>>> deb http://httpredir.debian.org/debian/ jessie main contrib >>>>>>>>>>> non-free >>>>>>>>>>> >>>>>>>>>>> Instalei o firmware b43 através do Synaptic; >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> * No link: https://wiki.debian.org/wl >>>>>>>>>>> <https://wiki.debian.org/wl> , fiz os procedimentos:* >>>>>>>>>>> >>>>>>>>>>> Installation >>>>>>>>>>> >>>>>>>>>>> Add a "non-free" component to /etc/apt/sources.list for your >>>>>>>>>>> Debian version, for example: >>>>>>>>>>> >>>>>>>>>>> *# Debian 8 "Jessie"* >>>>>>>>>>> * deb http://httpredir.debian.org/debian/ >>>>>>>>>>> <http://httpredir.debian.org/debian/> jessie main contrib non-free* >>>>>>>>>>> >>>>>>>>>>> Update the list of available packages. Install the >>>>>>>>>>> relevant/latest linux-image, linux-headers and broadcom-sta-dkms >>>>>>>>>>> packages: >>>>>>>>>>> >>>>>>>>>>> *# apt-get update* >>>>>>>>>>> * # apt-get install linux-image-$(uname -r|sed >>>>>>>>>>> 's,[^-]*-[^-]*-,,') linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') >>>>>>>>>>> broadcom-sta-dkms* >>>>>>>>>>> >>>>>>>>>>> This will also install the recommended wireless-tools >>>>>>>>>>> package. DKMS will build the wl module for your system. >>>>>>>>>>> >>>>>>>>>>> Unload conflicting modules: >>>>>>>>>>> >>>>>>>>>>> *# modprobe -r b44 b43 b43legacy ssb brcmsmac bcma* >>>>>>>>>>> >>>>>>>>>>> Load the wl module: >>>>>>>>>>> >>>>>>>>>>> *# modprobe wl* >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> *Digitei o comando:* >>>>>>>>>>> >>>>>>>>>>> *# iwconfig wlan0* >>>>>>>>>>> *wlan0 No such device* >>>>>>>>>>> >>>>>>>>>>> Instalei o *laptop-mode-tools* através do Synaptic. >>>>>>>>>>> >>>>>>>>>>> Alterei o *WIRELESS_BATT_POWER_SAVING=0* dentro de >>>>>>>>>>> /etc/laptop-mode/conf.d/wireless-power.conf e reinicie o notebook >>>>>>>>>>> >>>>>>>>>>> Depois disso não consegui mais visualizar o *wlan0*. Antes de >>>>>>>>>>> fazer os comandos acima do site https://wiki.debian.org/wl eu >>>>>>>>>>> conseguia visualizar, porem sem ter acesso ao Wifi. >>>>>>>>>>> >>>>>>>>>>> Depois pesquisando em alguns fóruns descobri alguns comandos que >>>>>>>>>>> me mostra as informações sobre o wifi, que pode ser útil. Me >>>>>>>>>>> apareceu isto: >>>>>>>>>>> >>>>>>>>>>> *lspci -k |grep -A2 -i network* >>>>>>>>>>> 03:00.0 Network controller: Broadcom Corporation BCM4311 >>>>>>>>>>> 802.11b/g WLAN (rev 01) >>>>>>>>>>> Subsystem: Quanta Microsystems, Inc Device 1102 >>>>>>>>>>> 05:00.0 Ethernet controller: Marvell Technology Group Ltd. >>>>>>>>>>> 88E8055 PCI-E Gigabit Ethernet Controller (rev 11) >>>>>>>>>>> >>>>>>>>>>> *Drivers:* >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> *$ ls -l /lib/modules/`uname -r`/kernel/drivers/net/wireless/* >>>>>>>>>>> *total 648* >>>>>>>>>>> -rw-r--r-- 1 root root 37160 Abr 8 19:21 adm8211.ko >>>>>>>>>>> -rw-r--r-- 1 root root 7284 Abr 8 19:21 airo_cs.ko >>>>>>>>>>> -rw-r--r-- 1 root root 96676 Abr 8 19:21 airo.ko >>>>>>>>>>> -rw-r--r-- 1 root root 53388 Abr 8 19:21 at76c50x-usb.ko >>>>>>>>>>> drwxr-xr-x 9 root root 4096 Jun 19 19:03 ath >>>>>>>>>>> -rw-r--r-- 1 root root 10688 Abr 8 19:21 atmel_cs.ko >>>>>>>>>>> -rw-r--r-- 1 root root 48124 Abr 8 19:21 atmel.ko >>>>>>>>>>> -rw-r--r-- 1 root root 4196 Abr 8 19:21 atmel_pci.ko >>>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 b43 >>>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 b43legacy >>>>>>>>>>> drwxr-xr-x 5 root root 4096 Jun 19 19:03 brcm80211 >>>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 hostap >>>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 ipw2x00 >>>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 iwlegacy >>>>>>>>>>> drwxr-xr-x 4 root root 4096 Jun 19 19:03 iwlwifi >>>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 libertas >>>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 libertas_tf >>>>>>>>>>> -rw-r--r-- 1 root root 49656 Abr 8 19:21 mac80211_hwsim.ko >>>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 mwifiex >>>>>>>>>>> -rw-r--r-- 1 root root 64476 Abr 8 19:21 mwl8k.ko >>>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 orinoco >>>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 p54 >>>>>>>>>>> -rw-r--r-- 1 root root 63056 Abr 8 19:21 ray_cs.ko >>>>>>>>>>> -rw-r--r-- 1 root root 62060 Abr 8 19:21 rndis_wlan.ko >>>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 rsi >>>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 rt2x00 >>>>>>>>>>> drwxr-xr-x 4 root root 4096 Jun 19 19:03 rtl818x >>>>>>>>>>> drwxr-xr-x 12 root root 4096 Jun 19 19:03 rtlwifi >>>>>>>>>>> -rw-r--r-- 1 root root 29420 Abr 8 19:21 wl3501_cs.ko >>>>>>>>>>> -rw-r--r-- 1 root root 29176 Abr 8 19:21 zd1201.ko >>>>>>>>>>> drwxr-xr-x 2 root root 4096 Jun 19 19:03 zd1211rw >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> *# lspci -nn -d 14e4:* >>>>>>>>>>> 03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 >>>>>>>>>>> 802.11b/g WLAN [14e4:4311] (rev 01) >>>>>>>>>>> >>>>>>>>>>> *Driver carregado:* >>>>>>>>>>> >>>>>>>>>>> *~$ lspci -k |grep -A2 -i network* >>>>>>>>>>> 03:00.0 Network controller: Broadcom Corporation BCM4311 >>>>>>>>>>> 802.11b/g WLAN (rev 01) >>>>>>>>>>> Subsystem: Quanta Microsystems, Inc Device 1102 >>>>>>>>>>> 05:00.0 Ethernet controller: Marvell Technology Group Ltd. >>>>>>>>>>> 88E8055 PCI-E Gigabit Ethernet Controller (rev 11) >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> *$ lspci* >>>>>>>>>>> 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, >>>>>>>>>>> 943/940GML and 945GT Express Memory Controller Hub (rev 03) >>>>>>>>>>> 00:02.0 VGA compatible controller: Intel Corporation Mobile >>>>>>>>>>> 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev >>>>>>>>>>> 03) >>>>>>>>>>> 00:02.1 Display controller: Intel Corporation Mobile >>>>>>>>>>> 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller >>>>>>>>>>> (rev 03) >>>>>>>>>>> 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High >>>>>>>>>>> Definition Audio Controller (rev 02) >>>>>>>>>>> 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI >>>>>>>>>>> Express Port 1 (rev 02) >>>>>>>>>>> 00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI >>>>>>>>>>> Express Port 2 (rev 02) >>>>>>>>>>> 00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI >>>>>>>>>>> Express Port 3 (rev 02) >>>>>>>>>>> 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB >>>>>>>>>>> UHCI Controller #1 (rev 02) >>>>>>>>>>> 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB >>>>>>>>>>> UHCI Controller #2 (rev 02) >>>>>>>>>>> 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB >>>>>>>>>>> UHCI Controller #3 (rev 02) >>>>>>>>>>> 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB >>>>>>>>>>> UHCI Controller #4 (rev 02) >>>>>>>>>>> 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 >>>>>>>>>>> EHCI Controller (rev 02) >>>>>>>>>>> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge >>>>>>>>>>> (rev e2) >>>>>>>>>>> 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC >>>>>>>>>>> Interface Bridge (rev 02) >>>>>>>>>>> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) >>>>>>>>>>> IDE Controller (rev 02) >>>>>>>>>>> 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M >>>>>>>>>>> Family) SATA Controller [AHCI mode] (rev 02) >>>>>>>>>>> 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus >>>>>>>>>>> Controller (rev 02) >>>>>>>>>>> 03:00.0 Network controller: Broadcom Corporation BCM4311 >>>>>>>>>>> 802.11b/g WLAN (rev 01) >>>>>>>>>>> 05:00.0 Ethernet controller: Marvell Technology Group Ltd. >>>>>>>>>>> 88E8055 PCI-E Gigabit Ethernet Controller (rev 11) >>>>>>>>>>> 07:01.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus >>>>>>>>>>> Controller >>>>>>>>>>> 07:01.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI >>>>>>>>>>> Compliant IEEE 1394 Host Controller >>>>>>>>>>> 07:01.2 Mass storage controller: Texas Instruments 5-in-1 >>>>>>>>>>> Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) >>>>>>>>>>> 07:01.3 SD Host controller: Texas Instruments PCIxx12 SDA >>>>>>>>>>> Standard Compliant SD Host Controller >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> *# ifconfig -a *eth0 Link encap:Ethernet Endereço de HW >>>>>>>>>>> 00:1b:24:47:96:a2 >>>>>>>>>>> inet end.: 192.168.0.20 Bcast:192.168.0.255 >>>>>>>>>>> Masc:255.255.255.0 >>>>>>>>>>> endereço inet6: fe80::21b:24ff:fe47:96a2/64 Escopo:Link >>>>>>>>>>> UP BROADCASTRUNNING MULTICAST MTU:1500 Métrica:1 >>>>>>>>>>> RX packets:78036 errors:0 dropped:0 overruns:0 frame:0 >>>>>>>>>>> TX packets:62759 errors:0 dropped:0 overruns:0 >>>>>>>>>>> carrier:0 >>>>>>>>>>> colisões:0 txqueuelen:1000 >>>>>>>>>>> RX bytes:71494430 (68.1 MiB) TX bytes:7452824 (7.1 >>>>>>>>>>> MiB) >>>>>>>>>>> IRQ:18 >>>>>>>>>>> >>>>>>>>>>> lo Link encap:Loopback Local >>>>>>>>>>> inet end.: 127.0.0.1 Masc:255.0.0.0 >>>>>>>>>>> endereço inet6: ::1/128 Escopo:Máquina >>>>>>>>>>> UP LOOPBACKRUNNING MTU:65536 Métrica:1 >>>>>>>>>>> RX packets:34 errors:0 dropped:0 overruns:0 frame:0 >>>>>>>>>>> TX packets:34 errors:0 dropped:0 overruns:0 carrier:0 >>>>>>>>>>> colisões:0 txqueuelen:0 >>>>>>>>>>> RX bytes:3547 (3.4 KiB) TX bytes:3547 (3.4 KiB) >>>>>>>>>>> >>>>>>>>>>> *(wlan0) sumiu!* >>>>>>>>>>> >>>>>>>>>>> digitei o comando *# rfkill list* mas não aparece nada >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>> >
