On Nov 17, 2007 1:55 PM, perico <[EMAIL PROTECTED]> wrote: > Manuel García escribió: > > On Nov 16, 2007 2:46 PM, perico <[EMAIL PROTECTED]> wrote: > > > >> Manuel García escribió: > >> > >>> On 10/24/07, perico <[EMAIL PROTECTED]> wrote: > >>> > >>> > >>>> He instalado Debian en un ordenador viejo con un pentium III 931mhz. > >>>> con tarjeta de red 3com 3c509b etherlink III. Esta tarjeta está > >>>> soportada por linux. Pero en la instalación, que ha sido correcta, no > >>>> me la ha reconocido. He intentado montar la tarjeta con la > >>>> herramienta "modconfi" pero este paquete no está instalado, ni tampoco > >>>> está en el CD de instalación. Como puedo montar la tarjeta sin > >>>> conexión a Internet. > >>>> gracias > >>>> perico > >>>> > >>>> > >>>> -- > >>>> To UNSUBSCRIBE, email to [EMAIL PROTECTED] > >>>> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >>>> > >>>> > >>>> > >>>> > >>> Lo primero que intentaria es utilizar el comando lspci como root para > >>> ver que datos arroja el SO sobre la tarjeta, luego, con esa > >>> información buscaria el modulo necesario en el kernel, y lo cargaria > >>> con modprobe. > >>> Basicamente, en una consola o terminal: > >>> > >>> 1.- su - > >>> 2.- lspci -v | less > >>> 3.- modprobe -l|grep nombre_modulo_posible > >>> 4.- modprobe modulo > >>> > >>> Si no arroja error... > >>> > >>> 5.- nano (o vi según tu gusto) /etc/network/interfaces (para > >>> asegurarnos que haya una definición para la tarjeta) > >>> 6.- ifup ethX (donde la X se sustituye por el número de la tarjeta, si > >>> es la única o la principal X=0) > >>> > >>> Game Over. > >>> > >>> > >>> > >> Retomando el tema: Os pego el resultado de > >> lspci -v | less > >> 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo > >> PRO133x] (rev c4) > >> Subsystem: Elitegroup Computer Systems: Unknown device 0969 > >> Flags: bus master, medium devsel, latency 16 > >> Memory at d0000000 (32-bit, prefetchable) [size=64M] > >> Capabilities: [a0] AGP version 2.0 > >> Capabilities: [c0] Power Management version 2 > >> > >> 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo > >> MVP3/Pro133x AGP] (prog-if 00 [Normal decode]) > >> Flags: bus master, 66MHz, medium devsel, latency 0 > >> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > >> Memory behind bridge: d4000000-d5ffffff > >> Prefetchable memory behind bridge: d6000000-d7ffffff > >> Capabilities: [80] Power Management version 2 > >> > >> 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile > >> South] (rev 23) > >> Subsystem: VIA Technologies, Inc. VT82C596/A/B PCI to ISA Bridge > >> Flags: bus master, stepping, medium devsel, latency 0 > >> > >> 0000:00:07.1 IDE interface: VIA Technologies, Inc. > >> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10) > >> (prog-if 8a [Master SecP PriP]) > >> Flags: bus master, medium devsel, latency 32 > >> I/O ports at e000 [size=16] > >> Capabilities: [c0] Power Management version 2 > >> > >> 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB > >> 1.1 Controller (rev 11) (prog-if 00 [UHCI]) > >> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller > >> Flags: bus master, medium devsel, latency 32, IRQ 10 > >> I/O ports at e400 [size=32] > >> Capabilities: [80] Power Management version 2 > >> > >> 0000:00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power > >> Management (rev 30) > >> Flags: medium devsel > >> > >> 0000:00:0b.0 Communication controller: Conexant HCF 56k Data/Fax/Voice > >> Modem (rev 08) > >> Subsystem: CIS Technology Inc: Unknown device 1134 > >> Flags: bus master, medium devsel, latency 32, IRQ 9 > >> Memory at d8000000 (32-bit, non-prefetchable) [size=64K] > >> I/O ports at e800 [size=8] > >> > >> > >> 0000:00:0c.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02) > >> Subsystem: Ensoniq Creative Sound Blaster AudioPCI128 > >> Flags: bus master, slow devsel, latency 32, IRQ 10 > >> I/O ports at ec00 [size=64] > >> Capabilities: [dc] Power Management version 1 > >> > >> 0000:01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA > >> TNT2 Model 64/Model 64 Pro] (rev 15) (prog-if 00 [VGA]) > >> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11 > >> Memory at d4000000 (32-bit, non-prefetchable) [size=16M] > >> Memory at d6000000 (32-bit, prefetchable) [size=32M] > >> Capabilities: [60] Power Management version 1 > >> Capabilities: [44] AGP version 2.0 > >> Yo no veo mi tarjeta. > >> gracias > >> > >> > >> > > > > lspci -v|grep Ethernet > > > > > Cuando ejecuto; > > lspci -v|grep Ethernet > > No me devuelve ninguna información. > Gracias. >
Entonces el problema es más grave, o no funciona el PCI del MoBo o no funciona la terjeta, probaste cambiandola de puerto PCI a ver? o es integrada? -- Manuel Garcia Administrador de redes y servidores Corporacion Lynqus Debian GNU/Linux 4.1 codename "Lenny"
