Marcos Delgado escribió: > El 17/11/07, Manuel García <[EMAIL PROTECTED]> escribió: > >> On Nov 17, 2007 1:55 PM, perico <[EMAIL PROTECTED]> wrote: >> >>> Manuel García escribió: >>> >>>> On Nov 16, 2007 2:46 PM, perico <[EMAIL PROTECTED]> wrote: >>>> >>>> >>>>> Manuel García escribió: >>>>> >>>>> >>>>>> On 10/24/07, perico <[EMAIL PROTECTED]> wrote: >>>>>> >>>>>> >>>>>> >>>>>>> He instalado Debian en un ordenador viejo con un pentium III 931mhz. >>>>>>> con tarjeta de red 3com 3c509b etherlink III. Esta tarjeta está >>>>>>> soportada por linux. Pero en la instalación, que ha sido correcta, no >>>>>>> me la ha reconocido. He intentado montar la tarjeta con la >>>>>>> herramienta "modconfi" pero este paquete no está instalado, ni tampoco >>>>>>> está en el CD de instalación. Como puedo montar la tarjeta sin >>>>>>> conexión a Internet. >>>>>>> gracias >>>>>>> perico >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> To UNSUBSCRIBE, email to [EMAIL PROTECTED] >>>>>>> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> Lo primero que intentaria es utilizar el comando lspci como root para >>>>>> ver que datos arroja el SO sobre la tarjeta, luego, con esa >>>>>> información buscaria el modulo necesario en el kernel, y lo cargaria >>>>>> con modprobe. >>>>>> Basicamente, en una consola o terminal: >>>>>> >>>>>> 1.- su - >>>>>> 2.- lspci -v | less >>>>>> 3.- modprobe -l|grep nombre_modulo_posible >>>>>> 4.- modprobe modulo >>>>>> >>>>>> Si no arroja error... >>>>>> >>>>>> 5.- nano (o vi según tu gusto) /etc/network/interfaces (para >>>>>> asegurarnos que haya una definición para la tarjeta) >>>>>> 6.- ifup ethX (donde la X se sustituye por el número de la tarjeta, si >>>>>> es la única o la principal X=0) >>>>>> >>>>>> Game Over. >>>>>> >>>>>> >>>>>> >>>>>> >>>>> Retomando el tema: Os pego el resultado de >>>>> lspci -v | less >>>>> 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo >>>>> PRO133x] (rev c4) >>>>> Subsystem: Elitegroup Computer Systems: Unknown device 0969 >>>>> Flags: bus master, medium devsel, latency 16 >>>>> Memory at d0000000 (32-bit, prefetchable) [size=64M] >>>>> Capabilities: [a0] AGP version 2.0 >>>>> Capabilities: [c0] Power Management version 2 >>>>> >>>>> 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo >>>>> MVP3/Pro133x AGP] (prog-if 00 [Normal decode]) >>>>> Flags: bus master, 66MHz, medium devsel, latency 0 >>>>> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 >>>>> Memory behind bridge: d4000000-d5ffffff >>>>> Prefetchable memory behind bridge: d6000000-d7ffffff >>>>> Capabilities: [80] Power Management version 2 >>>>> >>>>> 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile >>>>> South] (rev 23) >>>>> Subsystem: VIA Technologies, Inc. VT82C596/A/B PCI to ISA Bridge >>>>> Flags: bus master, stepping, medium devsel, latency 0 >>>>> >>>>> 0000:00:07.1 IDE interface: VIA Technologies, Inc. >>>>> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10) >>>>> (prog-if 8a [Master SecP PriP]) >>>>> Flags: bus master, medium devsel, latency 32 >>>>> I/O ports at e000 [size=16] >>>>> Capabilities: [c0] Power Management version 2 >>>>> >>>>> 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB >>>>> 1.1 Controller (rev 11) (prog-if 00 [UHCI]) >>>>> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller >>>>> Flags: bus master, medium devsel, latency 32, IRQ 10 >>>>> I/O ports at e400 [size=32] >>>>> Capabilities: [80] Power Management version 2 >>>>> >>>>> 0000:00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power >>>>> Management (rev 30) >>>>> Flags: medium devsel >>>>> >>>>> 0000:00:0b.0 Communication controller: Conexant HCF 56k Data/Fax/Voice >>>>> Modem (rev 08) >>>>> Subsystem: CIS Technology Inc: Unknown device 1134 >>>>> Flags: bus master, medium devsel, latency 32, IRQ 9 >>>>> Memory at d8000000 (32-bit, non-prefetchable) [size=64K] >>>>> I/O ports at e800 [size=8] >>>>> >>>>> >>>>> 0000:00:0c.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02) >>>>> Subsystem: Ensoniq Creative Sound Blaster AudioPCI128 >>>>> Flags: bus master, slow devsel, latency 32, IRQ 10 >>>>> I/O ports at ec00 [size=64] >>>>> Capabilities: [dc] Power Management version 1 >>>>> >>>>> 0000:01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA >>>>> TNT2 Model 64/Model 64 Pro] (rev 15) (prog-if 00 [VGA]) >>>>> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11 >>>>> Memory at d4000000 (32-bit, non-prefetchable) [size=16M] >>>>> Memory at d6000000 (32-bit, prefetchable) [size=32M] >>>>> Capabilities: [60] Power Management version 1 >>>>> Capabilities: [44] AGP version 2.0 >>>>> Yo no veo mi tarjeta. >>>>> gracias >>>>> >>>>> >>>>> >>>>> >>>> lspci -v|grep Ethernet >>>> >>>> >>>> >>> Cuando ejecuto; >>> >>> lspci -v|grep Ethernet >>> >>> No me devuelve ninguna información. >>> Gracias. >>> >>> >> Entonces el problema es más grave, o no funciona el PCI del MoBo o no >> funciona la terjeta, probaste cambiandola de puerto PCI a ver? o es >> integrada? >> -- >> Manuel Garcia >> Administrador de redes y servidores >> Corporacion Lynqus >> Debian GNU/Linux 4.1 >> codename "Lenny" >> >> > > Por lo que aparece en el listado, probablemente es una tarjeta ISA. No > he visto como configurar en la versión estable. Aparece el paquete > isapnptools pero para Sarge. > Saludos y buena suerte. > Marcos Delgado. > > > He instalado la utilidad "modconf" y he intentado instalar mi tarjeta y esto es lo que me sale:
debian:/home/pedro# modconf Instalando el módulo 3c509. Si el dispositivo no existe, o no está configurado correctamente, podría suponer que su sistema se pausase hasta un minuto. FATAL: Error inserting 3c509 (/lib/modules/2.6.12-1-686/kernel/drivers/net/3c509.ko): Unknown symbol in module, or unknown parameter (see dmesg) Falló la instalación. Muchas gracias. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
