Siempre me han ido bien, aunque tengo el kernel 2.6.0-test5 con el parche para nvidia, pero se actualiz� algo con el apt-get upgrade y ahora despu�s de tres intentos me manda a la consola. Y si intento compilar otra vez los drivers de nvidia en el kernel pues funciona bien, los carga a la perfecci�n y como ya he dicho cuando empez� a fallar yo no habia tocado nada. Esto pone en el kdm.log respecto al fallo.
----------------------------------------------------------------------- This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [email protected] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.2.1.1 (Debian 4.2.1-13 20031030071229 [EMAIL PROTECTED]) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 18 October 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.22-rc2 i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Thu Nov 6 17:08:11 2003 (==) Using config file: "/etc/X11/XF86Config-4" Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (EE) Failed to load module "nvidia" (once-only module, 1075378400) (II) [GLX]: Initializing GLX extension Fatal server error: Caught signal 11. Server aborting When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to [EMAIL PROTECTED] ----------------------------------------------------------------------- Y esto tengo en el XF86Config-4 # XF86Config-4 (XFree86 X server configuration file) generated by dexconf, the # Debian X Configuration tool, using values from the debconf database. # # Edit this file with caution, and see the XF86Config-4 manual page. # (Type "man XF86Config-4" at the shell prompt.) # # This file is automatically updated on xserver-xfree86 package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xfree86 # package. # # If you have edited this file but would like it to be automatically updated # again, run the following commands as root: # # cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom # md5sum /etc/X11/XF86Config-4 > /var/lib/xfree86/XF86Config-4.md5sum # dpkg-reconfigure xserver-xfree86 Section "Files" FontPath "unix/:7100" # local font server # if the local font server has problems, we can fall back on these FontPath "/usr/lib/X11/fonts/Type1" FontPath "/usr/lib/X11/fonts/CID" FontPath "/usr/lib/X11/fonts/Speedo" FontPath "/usr/lib/X11/fonts/misc" FontPath "/usr/lib/X11/fonts/cyrillic" FontPath "/usr/lib/X11/fonts/100dpi" FontPath "/usr/lib/X11/fonts/75dpi" EndSection Section "Module" Load "nvidia" #Ahora pongo nv mientras se soluciona el fallo Load "bitmap" Load "dbe" Load "ddc" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "record" Load "speedo" Load "type1" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "es" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/psaux" Option "Protocol" "PS/2" EndSection Section "InputDevice" Identifier "Generic Mouse" Driver "mouse" Option "SendCoreEvents" "true" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" EndSection Section "Device" Identifier "NVIDIA TNT2" Driver "nvidia" #Uso nv de momento Option "NoLogo" "True" Option "HWCursor" "True" EndSection Section "Monitor" Identifier "SAMSUNG" HorizSync 30-55 VertRefresh 50-120 Option "DPMS" EndSection Section "Screen" Identifier "Default Screen" Device "NVIDIA TNT2" Monitor "SAMSUNG" DefaultDepth 16 SubSection "Display" Depth 1 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" InputDevice "Generic Mouse" EndSection Section "DRI" Mode 0666 EndSection Gracias y un saludo.
