On Thu, Nov 06, 2003 at 06:42:58PM +0100, SoTaNeZ wrote: > Siempre me han ido bien, aunque tengo el kernel 2.6.0-test5 con el parche > para nvidia, pero se actualiz� algo con el apt-get upgrade y ahora despu�s de > tres intentos me manda a la consola. > Y si intento compilar otra vez los drivers de nvidia en el kernel pues > funciona bien, los carga a la perfecci�n y como ya he dicho cuando empez� a > fallar yo no habia tocado nada. Reinstal� el m�dulo para el kernel. > Esto pone en el kdm.log respecto al fallo. > > ----------------------------------------------------------------------- > This is a pre-release version of XFree86, and is not supported in any > way. Bugs may be reported to [email protected] and patches submitted > to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, > please check the latest version in the XFree86 CVS repository > (http://www.XFree86.Org/cvs) > > XFree86 Version 4.2.1.1 (Debian 4.2.1-13 20031030071229 [EMAIL PROTECTED]) / > X Window System > (protocol Version 11, revision 0, vendor release 6600) > Release Date: 18 October 2002 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/) > Build Operating System: Linux 2.4.22-rc2 i686 [ELF] > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Thu Nov 6 17:08:11 2003 > (==) Using config file: "/etc/X11/XF86Config-4" > Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols > found > (EE) Failed to load module "nvidia" (once-only module, 1075378400) > (II) [GLX]: Initializing GLX extension > > Fatal server error: > Caught signal 11. Server aborting > > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages. > This can be found in the log file "/var/log/XFree86.0.log". > Please report problems to [EMAIL PROTECTED] > ----------------------------------------------------------------------- > > Y esto tengo en el XF86Config-4 > > # XF86Config-4 (XFree86 X server configuration file) generated by dexconf, the > # Debian X Configuration tool, using values from the debconf database. > # > # Edit this file with caution, and see the XF86Config-4 manual page. > # (Type "man XF86Config-4" at the shell prompt.) > # > # This file is automatically updated on xserver-xfree86 package upgrades > *only* > # if it has not been modified since the last upgrade of the xserver-xfree86 > # package. > # > # If you have edited this file but would like it to be automatically updated > # again, run the following commands as root: > # > # cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom > # md5sum /etc/X11/XF86Config-4 > /var/lib/xfree86/XF86Config-4.md5sum > # dpkg-reconfigure xserver-xfree86 > > Section "Files" > FontPath "unix/:7100" # local font server > # if the local font server has problems, we can fall back on these > FontPath "/usr/lib/X11/fonts/Type1" > FontPath "/usr/lib/X11/fonts/CID" > FontPath "/usr/lib/X11/fonts/Speedo" > FontPath "/usr/lib/X11/fonts/misc" > FontPath "/usr/lib/X11/fonts/cyrillic" > FontPath "/usr/lib/X11/fonts/100dpi" > FontPath "/usr/lib/X11/fonts/75dpi" > EndSection > > Section "Module" > Load "nvidia" #Ahora pongo nv mientras se soluciona el fallo > Load "bitmap" > Load "dbe" > Load "ddc" > Load "extmod" > Load "freetype" > Load "glx" > Load "int10" > Load "record" > Load "speedo" > Load "type1" > Load "vbe" > EndSection > > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "keyboard" > Option "CoreKeyboard" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc105" > Option "XkbLayout" "es" > EndSection > > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device" "/dev/psaux" > Option "Protocol" "PS/2" > EndSection > > Section "InputDevice" > Identifier "Generic Mouse" > Driver "mouse" > Option "SendCoreEvents" "true" > Option "Device" "/dev/input/mice" > Option "Protocol" "ImPS/2" > EndSection > > Section "Device" > Identifier "NVIDIA TNT2" > Driver "nvidia" #Uso nv de momento > Option "NoLogo" "True" > Option "HWCursor" "True" > EndSection > > Section "Monitor" > Identifier "SAMSUNG" > HorizSync 30-55 > VertRefresh 50-120 > Option "DPMS" > EndSection > > Section "Screen" > Identifier "Default Screen" > Device "NVIDIA TNT2" > Monitor "SAMSUNG" > DefaultDepth 16 > SubSection "Display" > Depth 1 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 4 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 8 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 15 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 16 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 24 > Modes "1024x768" "800x600" "640x480" > EndSubSection > EndSection > > Section "ServerLayout" > Identifier "Default Layout" > Screen "Default Screen" > InputDevice "Generic Keyboard" > InputDevice "Configured Mouse" > InputDevice "Generic Mouse" > EndSection > > Section "DRI" > Mode 0666 > EndSection > > Gracias y un saludo. > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
-- Fernando M. Maresca
