You could just try guessing the option in modconf.
duplex=0 and duplex=1 are common for other nics. -----Original Message----- From: Gene Wheelbarger [mailto:[EMAIL PROTECTED]] Sent: Friday, 13 September 2002 2:06 PM To: Adrian 'Dagurashibanipal' von Bidder Cc: [EMAIL PROTECTED] Subject: Re: Set a Realtek 8019AS network card to half duplex - HOW? (hopefully I don't get flamed too hard for this!) Or you could just download ftp://152.104.125.40/cn/nic/rtl8019as/rset-8019(330).zip and extract the contents(rset8019.exe) to a DOS bootable floppy (you do still have one, right?), boot to DOS from the floppy, run the rset program and change whatever you need to, including full/half duplex. I've done this hundreds of times. Sorry, I'm more of a DOS & Winblows guy and don't know of a linux solution. hopefully this will solve your problem, though. Gene --- "Q. Gong" <[EMAIL PROTECTED]> wrote: > If you are using module for the NIC, it's perhaps > possible to set the half > duplex mode in the options passed to the module. > > Good luck, > > Qian <snip> ===== Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html __________________________________________________ Do you Yahoo!? Yahoo! News - Today's headlines http://news.yahoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
