On Sun, 2002-10-06 at 16:26, Kent West wrote: > >================================================================= > >Not the case I already checked that but looked again just to make sure I > >did not miss it. This is what I have. > > > >### BEGIN DEBCONF SECTION > ># Do not edit within this region if you want your changes to be > >preserved by > ># debconf. Instead, make changes after the "### END DEBCONF SECTION" > >line. > >allowed_users=console > >nice_value=-10 > >### END DEBCONF SECTION > > > >Any other ideas?? Thanks. > >John > > > > > > > > By failing to respond to the list, you've cut yourself off from a lot > more expertise than I have. Accordingly, I have re-routed this post to > the list, so your issue can get maximum exposure (and so others with > similar problems may find information in the archives). Thanks but that was simply an error. I intended to respond to the list but hit the wrong reply button. I'm new to evolution. I decided to try something and removed all of the instructions and comments from the Xwrapper.config contents leaving only the instructions for the Xfree applications and viola' everything works fine. I saw that this was the way the old files were done and figured that was the way to go. Thanks for your assistance.
allowed_users=console nice_value=-10 -- John Foster -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
