At 09:18 PM 10/27/02 -0800, you wrote:
ian said:> Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device" "/dev/psaux" > Option "Protocol" "PS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection do you have a PS2 mouse connected to /dev/psaux?
Yes i do
> Section "InputDevice" > Identifier "Generic Mouse" > Driver "mouse" > Option "SendCoreEvents" "true" > Option "Device" "/dev/input/mice" Option > "Protocol" "ImPS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection Is there a particular reason you have 2 pointers setup? just curious, I do this on my laptops and on my main desktop because my KVM is erratic in supporting wheel mice ..
Its the default, didn't bother changing it? is it a problem?
> Section "Device" > Identifier "NV AGP" > Driver "nv" > # BusID "PCI:0:13:0" > Option "UseFBDev" "true" I would delete the line that has UseFBDev
I'll try that
> EndSection > Section "Monitor" > Identifier "Generic Monitor" > HorizSync 28-48 > VertRefresh 43-72 > Option "DPMS" You using a 15" monitor?
Yes i am
> EndSection
> Section "Screen"
> Identifier "Screen AGP"
> Device "NV AGP"
> Monitor "Generic Monitor"
> DefaultDepth 24
> SubSection "Display"
> Depth 1
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 4
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 8
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 15
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 16
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 24
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> EndSection
> Section "ServerLayout"
> Identifier "AGP"
> Screen "Screen AGP"
> InputDevice "Generic Keyboard"
> InputDevice "Configured Mouse"
> InputDevice "Generic Mouse"
not sure if this needs updating or not but for my dual mouse
setup I have:
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
> EndSection
> Section "DRI"
> Mode 0666
> EndSection
I don't have this line in my XF86Config-4 either(I use a nvidia
geforce3).
I posted my config here:
http://portal.aphroland.org/~aphro/XF86Config-4
(note I am using the nvidia driver not the nv driver) and my
configuration is for my 19/20" monitors. And despite the
dual-head configuration I am not using that configuration(it
doesn't work for me for some reason, the driver only detects
one of my monitors).
Thanx i'll check it out....
nate -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Thanx for your help so far nate...
ian
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
