Hi list, I'm running kernel 2.6.7 on a Dell Latitude D800 with a Broadcom gigabit ethernet interface. I'm using the buildin tg3 module to support the NIC, but I can't seem to suspend my laptop because of it. When I try to suspend it displays an error like "tg3: eth0: Invalid powewrstate (4) requested" and then it says it can't suspend the device and springs back to live.
I've used the bcm module by broadcom with 2.4 kernels, but it doesn't seem to support the 2.6 series. Is there a way to get the suspend function working anyhow (apart from first unloading the module) joost DISCLAIMER This e-mail and any attached files are confidential and may be legally privileged. If you are not the addressee, any disclosure, reproduction, copying, distribution, or other dissemination or use of this communication is strictly prohibited. If you have received this transmission in error please notify A.S.T.R.I.D. nv/sa immediately and then delete this e-mail. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]