Are you sure it supports the BCM94306? I looked at their site and it isn't listed as supported.
Also, it doesn't find it when doing a modprobe prism54 Thanks, Alberto On Thu, 2004-08-05 at 18:02, Rajesh Menon wrote: > Hi, > Apparently, prism54 [prism54.org] supports the card. And I know prims54 > supports scanning, as I'm using it as we speak. Maybe you want to give it > a try (it comes as kernel module prism54 in the 2.6's). > > I can't comment on the bcmw15 however. > > HTH. > > On Thu, 5 Aug 2004, Alberto Alonso wrote: > > > I have a BCM94306 802.11g (rev 03) card which is seen using > > the ndis driver bcmwl5 > > > > ndiswrapper -l reports: > > > > bcmwl5 present > > > > Even though I can see wlan0 using iwconfig wlan0 the ESSID > > remains null. I can't set it to anything. > > > > When I do "iwlist wlan0 scanning" I get: > > > > wlan0 No scan results > > > > The AP is right next to the laptop. I have dissabled WEP to > > try to make it as simple as possible. I have no problem getting > > this card to work on Windows XP, and I also can see the Radio > > enabled light on, so it shouldn't be a radio problem. > > > > Any ideas? > > > > Thanks, > > > > Alberto > > > > > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > > > > > > > Rajesh Menon > Cell: 551-208-1253 > http://www.cs.nyu.edu/~prm225/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
