On Fri, 8 Oct 2004 [EMAIL PROTECTED] wrote:
> The discussion concerning this thread tells me that my own > understanding of the issues at play is far below that of certain other > posters. However, I will humbly wonder aloud if the IDE cable is firmly > seated in the connectors at both its ends. On two or three occasions I have it is not the "seating" of the cable that i was implying ... the problem is if you have an ata-33 device ( cdrom ), than it will slow down your ata-100/ata-133 disk performance when the cdrom is on the same cable as the 3x - 4x faster disk drives having different size disk buffers ( 2MB vs 8MB disk buffers ) also screws up the disk performance or corruptions - though i haven't seen this mee-self > spent much time cursing and fretting as I attempted to locate some serious > cause for strange system behaviour, only to discover that the freakin' IDE > cable had wiggled loose. cables .. disk cables, power cables, led cables... should all be tied down and never dangling or touching metal or corners or unused header pins on the mb c ya alvin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]