Hi, I am running debian sarge. I use a hard drive for back up, and I have to remove the hard drive intermittently. Each time I pull out one of the the hard drives from the machine to store as a backup, it seems that I must always set the jumpers on both! drives each time.
with 2 drives in machine - [one drive with "jumper set as master" and one drive with "jumper as slave" ] with 1 drive in machine - [one drive with jumper set as "master with no slave present"] I cant seem to get "cable select" to work ie: if one drive as master - set it to cable select adn it works on the end of the cable, while if 2 drives are present, teh second drive on the ribbon closer to the mother board should be the slave and the further the master. How can i set it up so i dont have to push the jumpers each time? it has an asus a7n8x-x mother board with award bios. Thanks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
