Hi Tux Guru's! I'm trying to install Debian Sarge onto Motherboard Asus P5GD1, but I have strongly problems to detect hard drive. I have 1 IDE disk and 4 SATA disk correctly mounted on board (BIOS recognize those), but dmesg NOT FOUND 2 SATA DISK AND IDE DISK!
On first step I lauched Knoppix Live with Kernel 2.6 , and dmesg is result of Knoppix hardware detection. All disks are empty. You can help me? It can be useful http://ta.twi.tudelft.nl/DV/Staff/Lemmens/linux_p5gd1.html ~# fdisk -l Disk /dev/sda: 300.0 GB, 300090728448 bytes 255 heads, 63 sectors/track, 36483 cylinders Units = cilindri of 16065 * 512 = 8225280 bytes Disk /dev/sdb: 300.0 GB, 300090728448 bytes 255 heads, 63 sectors/track, 36483 cylinders Units = cilindri of 16065 * 512 = 8225280 bytes ~# dmesg (very long) 6>SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. Checking for popad bug... OK. CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01 per-CPU timeslice cutoff: 2925.28 usecs. task migration cache decay timeout: 3 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 3000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 6012.92 BogoMIPS CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01 Total of 2 processors activated (11960.32 BogoMIPS). ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 3010.0137 MHz. ..... host bus clock speed is 200.0675 MHz. checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs CPU0: online domain 0: span 00000003 groups: 00000001 00000002 CPU1: online domain 0: span 00000003 groups: 00000002 00000001 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 771k freed NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4 PCI: Using MMCONFIG mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f8800 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x943a, dseg 0xf0000 pnp: 00:0a: ioport range 0x290-0x297 has been reserved pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0b: ioport range 0xcf8-0xcff has been reserved pnp: 00:0b: ioport range 0x480-0x4bf has been reserved pnp: 00:0b: ioport range 0x800-0x87f has been reserved pnp: 00:0b: ioport range 0x400-0x41f has been reserved PnPBIOS: Resource structure does not contain an end tag. pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0c: ioport range 0xcf8-0xcff has been reserved PNPBIOS fault.. attempting recovery. PnPBIOS: Warning! Your PnP BIOS caused a fatal error. Attempting to continue PnPBIOS: You may need to reboot with the "nobiospnp" option to operate stably PnPBIOS: Check with your vendor for an updated BIOS PnPBIOS: get_dev_node: unexpected status 0x28 PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver SCSI subsystem initialized 00:00:01[A] -> 2-16 -> IRQ 16 level low 00:00:01[B] -> 2-17 -> IRQ 17 level low 00:00:01[C] -> 2-18 -> IRQ 18 level low 00:00:01[D] -> 2-19 -> IRQ 19 level low 00:00:1d[A] -> 2-23 -> IRQ 23 level low 00:00:1e[B] -> 2-20 -> IRQ 20 level low 00:01:0b[A] -> 2-22 -> IRQ 22 level low 00:01:0b[D] -> 2-21 -> IRQ 21 level low number of MP IRQ sources: 17. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0020 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 003 03 0 1 0 0 0 1 1 71 0a 003 03 0 0 0 0 0 1 1 79 0b 003 03 0 0 0 0 0 1 1 81 0c 003 03 0 0 0 0 0 1 1 89 0d 003 03 0 0 0 0 0 1 1 91 0e 003 03 0 0 0 0 0 1 1 99 0f 003 03 0 0 0 0 0 1 1 A1 10 003 03 1 1 0 1 0 1 1 A9 11 003 03 1 1 0 1 0 1 1 B1 12 003 03 1 1 0 1 0 1 1 B9 13 003 03 1 1 0 1 0 1 1 C1 14 003 03 1 1 0 1 0 1 1 D1 15 003 03 1 1 0 1 0 1 1 E1 16 003 03 1 1 0 1 0 1 1 D9 17 003 03 1 1 0 1 0 1 1 C9 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. PCI: Using ACPI for IRQ routing PCI: Cannot allocate resource region 4 of device 0000:00:1f.3 vesafb: framebuffer at 0xde000000, mapped to 0xe080e000, size 3072k vesafb: mode is 1024x768x16, linelength=2048, pages=9 vesafb: protected mode interface info at c000:58a0 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device Starting balanced_irq audit: initializing netlink socket (disabled) audit(1119983984.4294967092:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Console: switching to colour frame buffer device 128x48 Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH6: IDE controller at PCI slot 0000:00:1f.1 ICH6: chipset revision 3 ICH6: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA hdb: GCR-8523B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 libata version 1.02 loaded. ata_piix version 1.02 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xAC00 ctl 0xA882 bmdma 0xA400 irq 19 ata2: SATA max UDMA/133 cmd 0xA800 ctl 0xA482 bmdma 0xA408 irq 19 ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:207f ata1: dev 0 ATA, max UDMA/133, 586114704 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:207f ata2: dev 0 ATA, max UDMA/133, 586114704 sectors: lba48 ata2: dev 0 configured for UDMA/133 scsi1 : ata_piix Vendor: ATA Model: Maxtor 6L300S0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 6L300S0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) SCSI device sda: drive cache: write back sda: unknown partition table Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 586114704 512-byte hdwr sectors (300091 MB) SCSI device sdb: drive cache: write back sdb: unknown partition table Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 EISA: Probing bus 0 at eisa0 Cannot allocate resource for EISA slot 1 EISA: Detected 0 cards. NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET: Registered protocol family 1 NET: Registered protocol family 15 Software Suspend has malfunctioning SMP support. Disabled :( PM: Reading pmdisk image. PM: Resume from disk failed. ACPI: (supports S0 S1 S3 S4 S5) RAMDISK: Compressed image found at block 0 EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device scsi2 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HL-DT-ST Model: CD-ROM GCR-8523B Rev: 1.03 Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi2, channel 0, id 0, lun 0 NCR53c406a: no available ports found mptscsih: Unknown symbol mpt_deregister mptscsih: Unknown symbol mpt_reset_deregister mptscsih: Unknown symbol mpt_config mptscsih: Unknown symbol mpt_device_driver_deregister mptscsih: Unknown symbol mpt_free_msg_frame mptscsih: Unknown symbol mpt_print_ioc_summary mptscsih: Unknown symbol mpt_GetIocState mptscsih: Unknown symbol mpt_put_msg_frame mptscsih: Unknown symbol mpt_register mptscsih: Unknown symbol mpt_add_sge mptscsih: Unknown symbol mpt_event_deregister mptscsih: Unknown symbol mpt_adapter_find_next mptscsih: Unknown symbol mpt_read_ioc_pg_3 mptscsih: Unknown symbol mpt_event_register mptscsih: Unknown symbol mpt_send_handshake_request mptscsih: Unknown symbol mpt_device_driver_register mptscsih: Unknown symbol DmpService mptscsih: Unknown symbol mpt_ASCQ_TableSz mptscsih: Unknown symbol mpt_v_ASCQ_TablePtr mptscsih: Unknown symbol mpt_get_msg_frame mptscsih: Unknown symbol mpt_ScsiOpcodesPtr mptscsih: Unknown symbol mpt_reset_register mptscsih: Unknown symbol mpt_HardResetHandler mptscsih: Unknown symbol mpt_adapter_find_first scsi: <fdomain> Detection failed (no card) GDT-HA: Storage RAID Controller Driver. Version: 3.04 GDT-HA: Found 0 PCI Storage RAID Controllers seagate: ST0x/TMC-8xx not detected. DC390: 0 adapters found Failed initialization of WD-7000 SCSI card! usbcore: registered new driver usbfs usbcore: registered new driver hub uhci_hcd: version magic '2.6.6 SMP preempt 386 gcc-2.95' should be '2.6.7 SMP preempt 386 gcc-3.3' ohci_hcd: version magic '2.6.6 SMP preempt 386 gcc-2.95' should be '2.6.7 SMP preempt 386 gcc-3.3' ieee1394: Initialized config rom entry `ip1394' sbp2: Unknown parameter `sbp2_serialize_io' sbp2: $Rev: 1219 $ Ben Collins <[EMAIL PROTECTED]> ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A cloop: Initializing cloop v2.01 cloop: loaded (max 8 devices) cloop: /cdrom/KNOPPIX/KNOPPIX: 30369 blocks, 65536 bytes/block, largest block is 65552 bytes. ISO 9660 Extensions: RRIP_1991A Freeing unused kernel memory: 264k freed Real Time Clock Driver v1.12 ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU1] (supports C1, 8 throttling states) ACPI: Processor [CPU2] (supports C1) Linux Kernel Card Services options: [pci] [cardbus] [pm] USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:1d.0: Intel Corp. I/O Controller Hub USB PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 23, io base 00009880 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: Intel Corp. I/O Controller Hub USB PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 19, io base 00009c00 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: Intel Corp. I/O Controller Hub USB PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 18, io base 0000a000 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: Intel Corp. I/O Controller Hub USB PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: irq 16, io base 0000a080 uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] hw_random: RNG not detected 8139too Fast Ethernet driver 0.9.27 eth0: RealTek RTL8139 at 0xe0b43c00, 00:40:f4:cb:63:6c, IRQ 21 eth0: Identified 8139 chip type 'RTL-8100B/8139D' eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NET: Registered protocol family 17 Linux agpgart interface v0.100 (c) Dave Jones apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. mtrr: 0xde000000,0x1000000 overlaps existing 0xde000000,0x200000 NET: Registered protocol family 10 Disabled Privacy Extensions on device c035fcc0(lo) IPv6 over IPv4 tunneling driver eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 eth0: no IPv6 routers present -- Openclose.it - Idee per il software libero http://www.openclose.it
