Mikael Bendtsen wrote: > > Hi all! > > I have been able to run Minicom without any problems but now it can't > find the modem (US Robotics Sportster 28800). > > When my system boots I get a few error messages: > > /dev/cua0 'no such device' > > /dev/cua1 'no such device' > /dev/cua2 'no such device' > /dev/cua3 'no such device' > > Since my modem is connected to /dev/cua0 I guess this has something to > do with it.
Most likely not (unless your modem happens to be Plug-n-Play). More likely you just have configured serial support as a module which doesn't happen to be loaded when serial port configuration happens. Change /etc/modules to load serial at manually rather than being auto-loaded if you want this message to go away. > Then, when I try configuring X with the standard SVGA X-server I get > this message when I type startx: > > xinit: can't load library 'libXmu.so.6' > > As far as I've found out, this library isn't referenced anywhere on my > harddisk. How do I get it there? I have added /usr/X11R6/lib to > /etc/ld.so.conf and /usr/X11R6/bin to the path statement in > /etc/profile. You are correct that you need to add the line /usr/X11R6/lib to your /etc/ld.so.conf file and run ldconfig. If you didn't rerun ldconfig or reboot then this line hasn't taken effect. Of course, there's always the outside chance that you don't have /usr/X11R6/lib/libXmu.so.6.* which shouldn't happen if you let dselect do it's work of selecting the X shared libraries. Good luck. Enjoy linux. -- Jens B. Jorgensen [EMAIL PROTECTED] -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]