> > [EMAIL PROTECTED] writes: > > [snip] > > > But .. it doesn't start ip-up properly, since > > ip-up does the following: > > [snip] > > > and I get messages from the echo lines, but I don't get any mail > > popped or sent. Strange is, if I run ip-up by hand, it behaves > > properly. > > Do putmail and getmail rely on any settings of uid? Slackware 3.0's
I don't know. Maybe. putmail simply checks if there are files in /var/spool/mqueue and if so starts sendmail on the queue. getmail starts popclient with appropriate parameters, and the filters received mail with awk. I'll check on this, but id doesn't work with root either. I also have to say that only getmail is not working .. mail get sent. So probably it's a problem with popclient (which is newer than Slack and has some differencies in options .. and is obsolete, substituted by .. fetchmail? that was alos substituted by .. don't remember .. I'll try qpopper and see how it behaves. > pppd ran ip-up (for me) with euid=root, uid=carey. Debian's pppd runs > ip-up with euid=root, uid=root. I'm using the gid=carey to work out > who invoked pppd. > > > Also, in debian pppd I have to set default route by hand, since pppd > > informs me that he refuses to substitute my default route (usually > > to eth0) to ppp0 I'm using defaultroute in options file, but this > > doesn't help. > > Are you sure the previous default route is right? For example, at Well. I'm almost sure here (but could be wrong anyway). My LAN is made up of two PCs, rarely up together (it's my home LAN). So default route is usually thru eth0, like this: (route -n) Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface a.b.c.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 5 lo 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 1 eth0 This is how both Slack and Debian (with /etc/init.d/network) set it up. When I call my ISP, I want my default route to be thru it: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface a.b.c.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 5 lo 0.0.0.0 my.isp.addr 255.255.255.0 U 0 0 1 ppp0 that's it. When I hang up, it has to revert to prior setup. With Slack that happened simply using defaultroute in /etc/ppp/options. > The best solution is to start "routed -q" which updates my machine You probably have real networks, so you have real routers and gateways. I think mine would be a little up-on-steroids home LAN if I used routed. > from the router's periodic broadcasts. I think I should put some > stuff in /etc/gateways in case someone else's machine starts > broadcasting bogus routes though. Thanks for your suggestions, -- || || ||||||| Marco Frattola Microsoft is not the answer ||`..'|| |||... Piacenza, Italy Microsoft is the question ||| ||| |||'' [EMAIL PROTECTED] "No" is the answer ||| ||| ||| www.enjoy.it/users/~mk/index.html Live Linux, live free!