When you select the modules to install make sure you put in ppp and TCP/IP
modules. Then edit the ppp.chatscript in the /etc directory to dial up
you ISP. Also edit the ppp.options_out file to reflect the correct serial
device. /dev/ttyS0 = com1 /dev/ttyS1 = com2 etc...
Then use pon to dial your provider.
Examples:
ppp.options_out:
defaultroute bsdcomp 15,15 /dev/ttyS1 115200 persist
ppp.chatscript:
ABORT BUSY
ABORT "NO CARRIER"
ABORT VOICE
ABORT "NO DIALTONE"
"" ATDT*67,1561627-9881
ogin your_user_name
word \qsecret
NOTE: Only one "\q" to replace password with "??????". If you use
one at the end it will display in your log files for the world to read.
I think that covers it. Have a good one.
On Sun, 4 May 1997, Plusweb - Drew wrote:
> I installed the debian disks that i made from the ftp site, now what should
> i do to install PPP?
> Thanks,
> Drew
> --
> Written by Drew Nichols, Plusweb Communications.
> Personal Address: [EMAIL PROTECTED]
> Visit Plusweb Communications - http://www.n-i.com
>
>
> --
> TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
> [EMAIL PROTECTED] .
> Trouble? e-mail to [EMAIL PROTECTED] .
>
--Rick
[EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
