On Sun, 1 Jun 1997 [EMAIL PROTECTED] wrote:
> I am trying to connect my compute to a LAN in the lab. > The network card (NE2000 IRQ 03 0x300) works fine and is detecked by the > kernel. After setting up all the stuff (/etc/hosts, /etc/resolv.conf, > /etc/sysconf/network, ...), it still cann't recognize other > computer when I use 'ping'. However, I noticed that when > setting up, there is a message saying there is something wrong with > 'SIOCADDRT'. And in file /proc/net/arp, all the hosts (gateways, > nameserver) all have hw-address to be 00 00 00 00 . So, what is the > problem? If you can't ping any hosts, your network interface probably doesn't work properly. If your kernel detects the presence of a network card, that doesn't necessarily mean that the kernel can make the card work. The error message with "SIOCADDRT" is a clear sign of such a problem. > Also, by setting the ether card, the mouse doesn't work anymore. Is > this because of the ether card (IRQ 3)? is there any utility to > detech this problem? You have a interrupt conflict between your ne2000 and serial port. They both try to own irq 3. Since it is generally very hard to reassign the serial port irq, you'll have to try to reassign the ne2000 irq. This might be as easy as changing a jumper or running a "setup" program on the driver diskette that is included by the manufacturer (unfortunately, these often require you to be able to boot into dos.) Sometimes you need to remove the interrupt conflict before you can reprogram the ne2000. In that case, you have to temporarily disable the serial port in your bios setup (or move the ne2000 to a machine that will allow you to do so if this one doesn't.) Maybe the card is plug-'n-pray. In that case check out the isaplugnplay package. Good luck, Joost -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .